Fully loaded and weighing in at just 15 pounds, the Bose S1 Pro is the ultimate all-in-one PA for soloists, event speakers, and smaller acts. Whether you tilt it, seat it, or mount it, the S1 Pro delivers rich, even coverage to an entire room, with Auto EQ to eliminate hotspots out on the floor. Two channels with independent EQ, reverb, and ToneMatch technology promise flattering reproduction of voices and instruments, while a dedicated third channel with 1/8" aux input and one-touch Bluetooth pairing and streaming handles music playback. A convenient carry handle facilitates speedy load-ins and setups, while a factory-installed Li-ion battery gives you unmatched PA portability.<br>Bose sound reinforcement are known for their wide, even coverage, and the S1 Pro is no exception. Sound is dispersed not just through the front of the enclosure, but the sides as well, for room-filling sound from a single unit. The Auto EQ feature keeps sound consistent as listeners move about a room.

The Denon DJ HP1100 headphones are the way to go. Their oversized 53mm drivers—the largest in their class—deliver unparalleled bass response and impact. They present every detail. They handle an impressive 3500mW of power, so high volume all night is no problem. With an innovative 180-degree swivel and dual-pivot ear cup design, the HP1100 conforms to any head size/shape and is more durable than other headphones.

When you are looking for a good pair of DJ headphones you want a pair that has a fresh design, is light and comfortable for long sessions, and of course is made by DJs for DJs. Red Wave Carbon is for you! It has full-range frequency response, ear pads that deliver all-night comfort, swiveling ear cups for convenient monitoring and a detachable cable with 1/8”-1/4” inch adapter for use with virtually any gear. <br><br> Red Wave Carbon sits comfortably over your ear and immerses you in sound so you can focus more on the mix. It is also comfortable to rest around your neck and cue your mix to one ear.

Xvive U2 guitar system features digital wireless technology that delivers incredible audio quality, simple setup, and is extremely reliable for any gigging musicians. It delivers a full 20Hz-20 kHz frequency response, so you’ll hear your guitar tone in great detail with only 6ms of latency. This wireless system operates at 2.4GHz ISM band for crystal clear broadcasting ensuring the integrity of your signal on stage and covers 70 feet of range without any signal dropout. The Li-ion batteries help makes the U2 wireless system environmentally friendly that can last up to 5 hours per charge. The chassis is made out of a durable ABS plastic that can withstand the rigors of touring and the harshest of climates. This wireless is a perfect fit for any pedal board thanks to its simplistic, and compact design. So, go wireless with the Xvive U2 system. It’ll declutter the stage and offers freedom in motion

Xvive U2 guitar system features digital wireless technology that delivers incredible audio quality, simple setup, and is extremely reliable for any gigging musicians. It delivers a full 20Hz-20 kHz frequency response, so you’ll hear your guitar tone in great detail with only 6ms of latency. This wireless system operates at 2.4GHz ISM band for crystal clear broadcasting ensuring the integrity of your signal on stage and covers 70 feet of range without any signal dropout. The Li-ion batteries help makes the U2 wireless system environmentally friendly that can last up to 5 hours per charge. The chassis is made out of a durable ABS plastic that can withstand the rigors of touring and the harshest of climates. This wireless is a perfect fit for any pedal board thanks to its simplistic, and compact design. So, go wireless with the Xvive U2 system. It’ll declutter the stage and offers freedom in motion

Xvive U2 guitar system features digital wireless technology that delivers incredible audio quality, simple setup, and is extremely reliable for any gigging musicians. It delivers a full 20Hz-20 kHz frequency response, so you’ll hear your guitar tone in great detail with only 6ms of latency. This wireless system operates at 2.4GHz ISM band for crystal clear broadcasting ensuring the integrity of your signal on stage and covers 70 feet of range without any signal dropout. The Li-ion batteries help makes the U2 wireless system environmentally friendly that can last up to 5 hours per charge. The chassis is made out of a durable ABS plastic that can withstand the rigors of touring and the harshest of climates. This wireless is a perfect fit for any pedal board thanks to its simplistic, and compact design. So, go wireless with the Xvive U2 system. It’ll declutter the stage and offers freedom in motion

Xvive U2 guitar system features digital wireless technology that delivers incredible audio quality, simple setup, and is extremely reliable for any gigging musicians. It delivers a full 20Hz-20 kHz frequency response, so you’ll hear your guitar tone in great detail with only 6ms of latency. This wireless system operates at 2.4GHz ISM band for crystal clear broadcasting ensuring the integrity of your signal on stage and covers 70 feet of range without any signal dropout. The Li-ion batteries help makes the U2 wireless system environmentally friendly that can last up to 5 hours per charge. The chassis is made out of a durable ABS plastic that can withstand the rigors of touring and the harshest of climates. This wireless is a perfect fit for any pedal board thanks to its simplistic, and compact design. So, go wireless with the Xvive U2 system. It’ll declutter the stage and offers freedom in motion

Xvive U2 guitar system features digital wireless technology that delivers incredible audio quality, simple setup, and is extremely reliable for any gigging musicians. It delivers a full 20Hz-20 kHz frequency response, so you’ll hear your guitar tone in great detail with only 6ms of latency. This wireless system operates at 2.4GHz ISM band for crystal clear broadcasting ensuring the integrity of your signal on stage and covers 70 feet of range without any signal dropout. The Li-ion batteries help makes the U2 wireless system environmentally friendly that can last up to 5 hours per charge. The chassis is made out of a durable ABS plastic that can withstand the rigors of touring and the harshest of climates. This wireless is a perfect fit for any pedal board thanks to its simplistic, and compact design. So, go wireless with the Xvive U2 system. It’ll declutter the stage and offers freedom in motion

Take control of your music with the T8S ToneMatch mixer, a compact 8-channel interface designed for performers. Engineered with a powerful DSP engine and intuitive user control, the T8S offers studio-quality EQ, dynamics and effects. Sound great with integrated BoseToneMatch processing and zEQ, especially when connected to a Bose L1 or F1 system for full end-to-end tonal control. Play confidently on stage with the rugged T8S using its tactile controls, easy-to-read LED display and scene recall. The T8S, a true performer’s companion.

The PGADRUMKIT7 includes a complete microphone package for reinforcing kick drums, snare drums, rack toms, floor toms, congas and cymbals for performance and recording.Complete with mic clips and drum mounts, cables, and a carrying case, the Shure PGA Drum Kit 7 is a great set of drum mics!

Excellent sound quality. Ideal for spoken word, karaoke, multimedia, and instrument use. The unidirectional (cardioid) polar pattern of the SV100 helps reduce feedback, while the wide frequency response and high output deliver excellent sound quality. Ideal for spoken-word presentations, karaoke performances, multimedia, and instrument use, the SV100 includes a durable cable with ¼" (6.3 mm) plug for use with home or portable recording/karaoke systems.

H-Ban's XLR cables use oxygen-free wire and substantial spiral shielding for optimum signal quality and noise rejection. H-Ban’s cables have the sound quality you need in your recording studio, corporate AV and has really tough durability that live stage use demands. All H-Ban microphone cables use standard REAN connectors for reliable connections every time. These metal connectors are built to last, and eliminate cord problems due to damaged cable connectors. All the cables carry a limited lifetime warranty to the original purchaser against defects in materials and workmanship.

Vocal Microphone<br> Tuned to accentuate the warmth and clarity of lead and back-up vocals, the SM58 is a legendary live vocal microphone known for its rugged reliability on tour.<br><br> Features:<br><br> Frequency response tailored for vocals, with brightened midrange and bass rolloff Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise<br><br> -Pneumatic shock-mount system cuts down handling noise<br> -Effective, built-in spherical wind and pop filter<br> -Supplied with break-resistant stand adapter which rotates 180 degrees<br> -Legendary Shure quality, ruggedness and reliability<br> -Cardioid (unidirectional) dynamic<br> -Frequency response: 50 to 15,000 Hz<br> -Replacement cartridge: R59<br> -Handheld microphone ideal for live vocals<br> -Dynamic cartridge with cardioid polar pattern<br> -Available with or without a cable and On / Off switch, and available in wireless versions<br><br> Includes SM58, microphone clip, storage bag, and user guide.The legendary Shure SM58 vocal microphone is designed for professional vocal use in live performance, sound reinforcement, and studio recording. Its tailored vocal response for sound is a world standard for singing or speech. A highly effective, built-in spherical filter minimizes wind and breath "pop" noise. A unidirectional (cardioid) pickup pattern isolates the main sound source while minimizing unwanted background noise. <br><br> Rugged construction, a proven shock-mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently, outdoors or indoors.

Reduces unwanted breath and wind noise. For use with the Shure Beta57A microphone. Available in black.

Vocal Microphone <br>A high-output vocal microphone, the BETA 58A® features a shaped frequency response ideal for close-up vocals. <br>Handheld microphone for professional live vocals and project studio recording Dynamic cartridge with supercardioid polar pattern Available in wireless versions Includes BETA 58A, microphone clip, thread adapter, storage bag, and user guide<br> <br>The Beta 58A maintains a true supercardioid pattern throughout its frequency range. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.<br> <br>Features<br> <br>-Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect <br>-Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound <br>-Neodymium magnet for high signal–to–noise output <br>-Hardened steel mesh grille that resists wear and abuse <br>-Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration <br>-Minimally effected by varying load impedance <br>-Legendary Shure quality and reliability

The PGA48 Cardioid Dynamic Vocal Microphone from Shure features a durable, rugged design geared towards spoken word and karaoke use, and includes an XLR to 1/4" cable. It is tuned specifically for clarity in the standard speech frequency range, and has an On/Off switch, allowing the user to quickly quiet the microphone when needed. A microphone clip, stand adapter, and zippered carrying pouch are also included. Tailored microphone cartridge design specifically for clarity in the standard frequency range of speech Cardioid polar pattern picks up audio from the source while rejecting unwanted noise Industrial design with black metallic finish and classic silver ball grille On/Off switch for discrete control of microphone operation Stand adapter for mounting to a microphone stand Zipper pouch included for additional protection during storage or transport

SE215 Wireless Sound Isolating™ Earphones with Bluetooth® Communication cable provide hour after hour of rich, detailed sound with enhanced bass, the freedom of wireless and simplicity of Bluetooth.<br><br>Features:<br>Detailed, lifelike sound with extended bass elevates audio performance in a convenient and portable mobile package.<br>Sound Isolating™ design featuring comfortable sleeves that block up to 37 dB of ambient noise for extended listening, without distractions.<br>Bluetooth 4 pairs with most phones, laptops and tablets, with up to 8 hours of battery life and 30 feet (10 meters) of range.<br> Multi‐point pairing enables pairing of up to two devices for seamless transitions from the office to on‐the‐go between multiple sources and media types.<br> Control your world at your fingertips: three‐button remote and mic offers audio for phone calls, voice commands and other voice‐activated device features.<br><br>Translucent black, translucent blue, white and clear color options offer an expression of personal style. Ergonomically optimized earphones designed to rest comfortably in the ear for unmatched comfort and personalization. Wireform, behind‐the‐ear cable provides customized, stable and secure fit. Nozzle angle matches the contour of the ear canal for lasting comfort. Zippered carrying pouch included for storage protects your investment from the rigors of everyday life. Clothing clip stabilizes the wire for security and stability during both exercise and travel.

Superior sound quality with remarkable isolation derived from decades of developing gear for professional musicians. Integrated microphone and three-button remote ensures clarity for calls and voice prompts, and provides volume and playback control.The low-profile lightweight design makes the SE215 comfortable to wear. Includes USB charging cable, clothing clip, zippered carrying case and fit kit.Available in Black and White

SE215 Sound Isolating™ Earphones provide award-winning sound in a secure, over–the-ear design for long-lasting comfort and immersive audio. Available in wireless and wired versions with detachable cables in multiple color options.<br><br>Features:<br><br>-Single Dynamic Driver produces clear sound with deep bass in a convenient and portable package. Special Edition (SPE) white and blue versions have distinctly tuned frequency response for extended bass.<br>-Detachable cable system enables multiple connectivity options for long-term device compatibility, upgrades, and ease of maintenance.<br>-Sound Isolating design blocks up to 37 dB of outside noise for immersive listening no matter where you are.<br>-Secure, over-the-ear configuration keeps earphones in place and cables out of the way for unmatched, long-wearing comfort.<br>-Wireless models pair with most phones, laptops and tablets with Bluetooth 4.1 connectivity, and provide up to 8 hours of battery life and 30 feet (10 meters) of wireless range.<br>-Universal communication models (-UNI) come equipped with remote + mic control and selectable iOS/Android functionality with 3.5 mm connection.<br>-Inline remote and mic on select models offers seamless control for phone calls, voice commands, and easily accessible operation of volume and music playback.<br>-Include zippered carrying case and fit kit with selection of sleeves for personalized fit and comfort.

Protect your investment with the Mackie Speaker Bag. Designed specifically to hold the SRM450 and C300z speakers, this bag will ensure your bags are safe from dents, scratches, wear, and dust. Featuring high density padding and a shoulder carrying strap for easy transport.

An essential tool for every musician and engineer, the MDB-1P Passive DI has everything you need to adapt unbalanced, high-impedance audio to a balanced, low-impedance output with minimal noise. Featuring a 1/4” high-impedance input and thru with -15db pad and a balanced XLR output with ground lift.

Clear sound with deep bass elevates your audio performance in a convenient and portable package<br> Sound Isolating design featuring fit kit with a variety of sleeves for custom fit blocks up to 37 dB of outside noise for immersive listening no matter where you are Inline remote and microphone offers seamless control for phone calls, voice commands, and easily accessible operation of volume and music playback Zippered carrying case and fit kit with selection of sleeves included for personalized fit and comfort,<br> Choice of Special Edition translucent blue or white for a stylish finish, choice of clear or translucent black brings stage-inspired looks to the street

The BLX14UK/CVLX-K14 Lavalier Wireless System is part of the BLX wireless systems family. Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage. Includes BLX4 wireless receiver, BLX1 bodypack transmitter, CVL lavalier microphone, power supply, lavalier clip, windscreens, and user guide.

5-input Desktop Mixer with 1 Microphone Preamplifier, 2 Stereo Channels, Tape I/O, and Separate Volume and Headphone Levels<br><br>Mackie is a leader in many categories, the small format mixer being among the foremost. The Mix5 represents Mackie's current 5-channel option in the inexpensive, low-profile mixer marketplace, and like all of their small format mixers from the past, the Mix5 is a winner. Perfect for straightforward applications that incorporate a single mic with other sources, Mix5 sounds great and maintains audio quality from any source. It features Mackie's signature "built like a tank" construction care of its rugged metal chassis, and four of Mackie's legendary preamps.

Precision-engineered for years of use in any Shure wireless systems, its compact size is ideal for presenting situations where visibility is a major concern. The unidirectional (cardioid) pickup pattern rejects unwanted sound for superior source quality and vocal reproduction.

Securely mounts the SM58, SM57, SM87A, Beta 87A and all other microphones with 3/4-inch and larger handles to a standard microphone stand.Securely mounts the SM58, SM57, SM87A, Beta 87A and all other microphones with 3/4-inch and larger handles to a standard microphone stand.

MP-120 Professional In-Ear Monitors feature specially molded enclosures for an ergonomic fit providing hours of comfort and superior noise isolation. The over-ear design ensures an uninterrupted performance while the precision-tuned dynamic driver provides clear and punchy sound so you never miss a beat. And with the included hard case, your investment will always be protected. When you want to hear yourself on stage without all the noise that comes with it, MP-120 Professional In-Ear Monitors have got you covered.

The Mackie SPM300 Speaker Pole allows you to pole mount your Mackie DLM speakers on top of a subwoofer.

MP-220 Dual Dynamic Driver Professional In-Ear Monitors feature custom-molded enclosures for an ergonomic fit providing hours of comfort and superior noise isolation. The over-ear design ensures an uninterrupted performance while the dual precision-tuned dynamic drivers provide deep low-end and enhanced vocal clarity. When you want to hear yourself on stage without all the noise that comes with it, MP-220 Professional In-Ear Monitors have got you covered.

Foam windscreen reduces unwanted breath and wind noise while using Beta 98, MX183, MX184, MX185, MX202, WH30, WL183, WL184, and WL185 microphones.

Vocal Microphone<br> For studio-quality sound in live performance, a smooth, tailored response for warm, accurate sound.<br> <br>The Shure BETA®87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.<br> <br>The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the “boomy” sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.<br> <br>Features<br> <br>Smooth frequency response with gradual presence rise <br>Highly consistent supercardioid polar pattern provides superior gain-before-feedback <br>Electronic low-frequency roll-off compensates for proximity effect <br>Wide dynamic range (117 dB) and low distortion characteristics <br>Very low susceptibility to RFI and electromagnetic hum <br>Advanced cartridge shock-mount system absorbs mechanical shocks and reduces handling noise <br>Built-in pop filter reduces undesirable wind and breath sounds <br>Legendary Shure quality and reliability

With the bus-powered MDB-USB Stereo DI, the days of relying on your headphone jack to get audio from a computer into analog gear are over. Combining a high-resolution audio interface with a noise and distortion-free stereo DI, MDB-USB converts your digital audio into clean, balanced, stereo output. Featuring an output level control, headphone output, and mono sum for maximum versatility. Analog outputs are dual XLR with ground lift.

The ProFX16v2 16-channel mixing console from Mackie features a built-in effects engine, and is ideal for a plethora of live sound reinforcement applications ranging from live bands and DJs to lecturers and presenters. With 10 XLR mic inputs with low-noise Vita microphone preamps, per channel 3-band EQ, 2 aux sends, and an FX out for feeding external processors, the ProFX16v2 offers professional features to suit a wide variety of configurations.<br><br>In addition to the mic inputs, the ProFX16v2 includes 16 line inputs for connecting keyboards, samplers, and other gear. There is also an RCA tape input and output for connecting portable music players similar devices. In addition, the mixer has rugged 60mm faders for all input channels, return and main/monitor masters.<br><br> The ProFX16v2's effects engine offers 16 different effects, including reverbs, delays, and choruses. It also features a 7-band graphic EQ that can be used for tuning mains or monitors, and a built-in USB interface that can be used to record the show or provide music playback via Mac or Windows computer.<br><br> Features at a Glance:<br>-10 low-noise Vita mic preamps<br>-ReadyFX effects engine with 16 effects like reverbs, delays, and choruses<br>-Single-knob channel compression for smooth, even dynamic control (ch. 5-8)<br>-7-band graphic EQ for tuning mains or monitors,<br>-Built-in USB interface to record the show or provide music playback<br>-4 flexible subgroups for professional mix management 2 aux outputs for monitor mixes, fill speakers, and more.<br>-3-band EQ with sweepable mids on mono channels<br>-16 high-headroom line level inputs Individual channel mutes and overload indication<br>-100 Hz low-cut filters per channel (18 dB/octave)

Instrument Microphone An industry standard for performance and recording, the versatile and rugged SM57 is an exceptional instrument microphone and vocal microphone. The legendary Shure SM57 is exceptional for musical instrument pickup and vocals. With its bright, clean sound and contoured frequency response, the SM57 is ideal for live sound reinforcement and recording. The SM57 has an extremely effective cardioid pickup pattern that isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. Outstanding performance, reliability, and application diversity make this "workhorse" the choice of performers, producers, and sound engineers worldwide. Handheld or mountable microphone for guitars, vocals, and other instruments in live sound and recording applications Dynamic cartridge with cardioid polar pattern Available with or without a cable Includes SM57, microphone clip, storage bag, and user guide

Black foam windscreen for larger Shure "ball-type" microphones, such as the SM48, SM58®, Beta 58A®, or 565SD.

Cardioid Dynamic Snare / Tom Microphone The PGA56 is designed for clear reproduction of the sound source in close-miking percussion applications. Available with and without a cable. Mountable microphone featuring swivel joint with quick-release latch for snare drum, toms and percussion Dynamic cartridge (does not require phantom power) with cardioid polar pattern Includes PGA56, drum mount (stand not required), zipper pouch and user guide The PGA56 is a professional quality snare / tom microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Additional design highlights include a swivel joint featuring a quick-release latch similar to bicycle component-locking technology for extremely quick and easy positioning, and a tailored cartridge for clear reproduction of sound sources. Legendary Shure quality construction ensures exceptional performance in rigorous environments.

4 channel Professional Effects Mixer 230v UK plug /2044600-03 The Mackie ProFX4v2 4-channel effects mixer provides a comprehensive live sound solution for singer/songwriters and other low channel count applications. Delivering unmatched sound quality, the ProFX4v2 features all-new Mackie Vita preamps, which are virtually noiseless and designed specifically for the highly-dynamic world of live sound. ProFX4v2 also includes the immensely powerful new ReadyFX effects engine, harnessing floating-point DSP to deliver 16 rich effects that elevate any performance. A no-compromise live sound toolkit includes a room-shaping GEQ and flexible I/O for professional applications. With a rugged steel chassis and unmatched sonic performance, ProFX4v2 is truly the life of your live mix.

The perfect upgrade to supplied “earbud-type” headsets, and fully compatible with all Apple iOS devices, the SE112m+ provides great sound with deep bass with impressive sound isolation. An inline three-button remote offers seamless control of all device functions with the touch of a button.<br><br>FEATURES:<br>Sound Isolating Design, Ttechnology prevents outside noise from interfering with your listening experience, whether onstage or on-the-go. Shure Sound Isolating Earphones require a proper fit to achieve the best sound.<br><br>Unmatched Personalization and Comfort. Ergonomic, professional form factor with optimized nozzle angle is designed to rest comfortably in the ear. Cables can be worn over the ear to keep them out of the way or straight down, depending on personal preference.<br><br>ACCESSORIES:<br>Three sizes of soft, flexible sleeves gently contour to your ears for a perfect fit. A nozzle cleaning tool helps you keep your earphones free of earwax and other debris so you can enjoy great sound quality. A drawstring pouch for storage also is included. Integrated three-button remote + mic allows you to adjust the volume, control music and video playback, and answer or end calls on Apple iOS devices.<br><br>Made for iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPad Air, iPad mini with Retina display, iPad (4th generation), iPad mini, iPad (3rd generation), iPad 2, iPad, iPod touch (2nd through 5th generation), iPod classic, iPod nano (4th through 7th generation) and iPod shuffle (1st through 4th generation).

The Shure SM48-LC Microphone offers many of the same qualities as the famous SM58 but at a lower price. This unidirectional dynamic mic is designed for professional sound reinforcement, studio recording, and broadcasting. It maintains a true cardioid pattern throughout its frequency range, ensuring high gain before feedback and rejection of off-axis sound. Frequency response is tailored for vocals with a presence rise in the midrange to brighten performance. A low-frequency roll-off is provided for controlling proximity effect. A shock-mounted cartridge, steel mesh grille, and an integral pop filter make the Shure SM48 tough and resistant to handling noise.<br><br> FEATURES<br> <br>-Cardioid pickup pattern rejects off-axis sound and provides superior gain before feedback <br>-Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect <br>-Shock-mounted cartridge for exceptional ruggedness and reduced handling noise <br>-Built-in "pop" filter that reduces explosive breath sounds and wind noise Supplied stand adapter and carrying/storage bag <br>-Legendary Shure quality and ruggedness

The Shure Microflex® MX150 is a professional electret condenser microphone ideal for applications requiring low-profile placement.<br>Fully compatible with all Shure wireless systems, the discreet MX150 offers uncompromising sound quality and high reliability for television broadcasting, corporate lectures, A / V teleconferencing, houses of worship, and sound reinforcement.

The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48v of power for the best sound and noise performance. Powered by either a 9v battery or supplied AC adapter.

The Shure MX150 Subminiature Lavalier Microphone is a subminiature, multi-positioned clip-on microphone well suited for broadcast operation, sermons, presentations, public address and much more. This version features a TQG connection for use with Shure wireless bodypack transmitters. Shure's CommShield technology makes the MX150 impervious to noise caused by cell phones, PDAs, WiFi and other RFI. The microphone ships with a snap-fit foam windscreen and multi-position tie clip with an integrated cable management system that minimizes noise without increasing cable strain and tension.

Rugged cardioid condenser microphone features a tailored frequency response for clear reproduction of vocals. The built-in, three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise. Includes SM86, clip, storage bag, threaded adapter, and user guide.

Designed for professional audio engineers and in-studio talent, SRH940 Headphones from Shure deliver accurate response across the entire audio spectrum for smooth high-end extension with tight bass.<br><br> Superior transient response provides minimal distortion. The collapsible, lightweight design with premium padded headband offers superior comfort and portability. Two included detachable cables (straight and coiled) and a replacement set of velour ear pads ensure a long product life.<br> Also includes a hard zippered travel case and a threaded 1/4" (6.3) mm gold-plated adapter.<br><br> Features<br> <br>-Accurate frequency response delivers smooth high-end extension with tight bass, and superior transient response for minimal distortion <br>-Lightweight, ergonomic fit with premium padded headband provide maximum comfort over extended periods <br>-Closed-back, circumaural design rests comfortably over the ears and reduces background noise <br>-Collapsible design with 90-degree swivel ear cups for convenient storage and portability <br>-Legendary Shure quality to withstand the rigors of everyday use <br>-Bayonet Clip securely locks cable into ear cup <br>-Replaceable velour ear pads included to ensure long product life and maximum comfort <br>-Two included detachable cables (coiled & straight) provide flexible wearing options and easy replacement <br>-Zippered hard travel case protects headphones when on the go or not in use

Great for stereo sources like keyboards and synthesizers, the MDB-2P is an essential tool for electronic musicians, live sound venues, and recording studios. The MDB-2P Stereo Passive DI features dual 1/4” high-impedance inputs with Thru outputs and -15db pads, and dual low-impedance XLR outputs with ground lift.

The SRH440 Professional Studio Headphones from Shure provide exceptional sound reproduction and comfort. Optimized for home and studio recording, SRH440 headphones reproduce accurate audio across an extended range. Impedance, power handling and sensitivity are all calibrated for professional audio devices such as DJ mixers, mixing consoles, and headphone amplifier. Includes carrying bag and threaded 1/4" (6.3mm) gold plated adapter.

Instrument Microphone<br> Excellent microphone designed for use with amplified or acoustic instruments. Compact grille design. <br>The Shure BETA®57A is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off–axis tone coloration.<br> <br>Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.<br> <br>Features<br> <br>Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound <br>Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound <br>Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse <br>Neodymium magnet for high signal–to–noise ratio output <br>Minimally affected by varying load impedance <br>Advanced pneumatic shock mount system that minimizes transmission of <br>mechanical noise and vibration <br>Legendary Shure quality and reliability

CR-Buds HIGH-PERFORMANCE EARPHONES<br><br> Superior Sound Isolation and Comfort<br> Enjoy hours of comfort with soft silicone tips that keep outside noise to a minimum With three different ear tip sizes included, you can choose what works best for your ears for maximu<br>m comfort, sound isolation, and bass response<br> Listen in Style<br> Make a statement when you enjoy your music with signature Mackie cosmetics<br> Tangle-free cable looks great and minimizes fuss<br><br> Precision Driver<br> Tuned for exceptional clarity and bass response, the full-range dynamic driver offers an immersive sound experience<br><br> Answer Calls and Control Your Music<br> In-line microphone with call answer control Play/Pause music (may support additional functionality depending on your device)

The SE535 Sound Isolating™ Earphones feature triple high-definition drivers for spacious sound with rich bass in a secure, low-profile fit and innovative detachable cable system<br>Triple high-definition drivers deliver spacious sound and rich bass for cinematic audio in a convenient and portable package.Detachable cable system enables multiple connectivity options for long-term device compatibility, upgrades, and ease of maintenance.Sound Isolating design blocks up to 37 dB of outside noise for immersive listening no matter where you are.Secure, over-the-ear configuration keeps earphones in place and cables out of the way for unmatched, long-wearing comfort.Special Edition version (LTD) with a distinctly tuned frequency filter and a unique color scheme of red earphones paired with light gray 3.5 mm audio cable in shortened 46” length.Clear SE535 model incudes standard 3.5 mm clear cable, volume control, premium carrying case, ¼“ adapter, and fit kit with wide selection of sleeves for custom fit.

Microphone mounting clip for all Shure handheld transmitters

Instrument Microphone<br> Compact drum microphone engineered for close miking of snare and toms.<br> The Shure BETA®56A microphone has a frequency response specifically tailored for drums and instruments. Its extremely uniform supercardioid pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.<br> <br>A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.<br> <br>Features <br>-Tailored frequency response provides drums, amplified instruments, and horns with studio quality sound <br>-Built–in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility <br>-Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound <br>-Compact design reduces stage clutter <br>-Hardened steel mesh grille resists wear and abuse <br>-Neodymium magnet for high signal–to–noise ratio output <br>-Minimally affected by varying load impedance <br>-Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration <br>-Legendary Shure quality and reliability

Never play the guessing game with cables again. Featuring a simple 5-way switch to test every pin, even with mismatched connectors, the battery-powered MTEST-1 is an essential tool to have in your bag for every gig. You can even manually test continuity between any two points with the included probes. Equipped with the most commonly used connector types including TRS, TS, XLR, RCA, Speakon, 3.5mm TRS, MIDI, and Banana jacks.

The Shure SM58SE is a rugged dynamic microphone tuned to accentuate the warmth and clarity of lead and back-up vocals. The SM58 is consistently the first choice of performers around the globe. The Shure SM58 is a unidirectional (cardioid) dynamic vocal microphone designed for professional vocal use in live performance, sound reinforcement, and studio recording. A highly effective, built-in, spherical filter minimizes wind and breath "pop" noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The SE variation of the SM58 features a switch for muting the microphone when not in use. The SM58 has a tailored vocal response for a sound which is a world standard. Rugged construction, a proven shock mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently. Outdoors or indoors, singing, speech - the SM58 is the overwhelming choice of professionals.

1000W Biamplified Live Speaker with 12" LF Driver, 1.4 Titanium Dome Compression Driver, 2-channel Mixer, and On-board Digital Audio Processing (Each)<br><br> This is the second redesign of the popular SRM450. The version 3 iteration of this sound reinforcement industry standard offers numerous features unavailable on previous models. It is a 1,000-watt powered enclosure with a 12" LF driver and a 1.4" HF compression driver, a precision two-way crossover and some output processing that you will really appreciate.<br><br> The SRM340v3 has a "built-like-a-tank" chassis that is cut in such a way that it is also an excellent wedge floor monitor. Not only that, there is a voicing select switch that when engaged for monitor use, adds greater upper end clarity for vocal intelligibility and an enhanced feedback rejection. When using the SRM450v3 in a DJ context, the Speaker Mode switch adds just the perfect low end bump. It likewise has a setting optimized for solo entertainers.<br><br> A flexible two-channel mixer is installed in the back panel as well, allowing you to use one SRM450v3 as an entire PA system. The built-in mixer features two XLR/TRS combination jacks, stereo RCA inputs and discrete gain controls for each channel. Lightweight, versatile, loud and clear.<br><br> FEATURES:<br> -1,000-watt Class D and AB power amps with 12" high-output LF driver and 1.4" titanium dome compression driver <br>-Precision 2-way crossover, driver alignment and phase correction <br>-Onboard feedback destroyer <br>-2-channel mixer features XLR/TRS combination jacks and stereo RCA inputs <br>-Smart Protect DSP component protection <br>-Use for mains or stage monitoring <br>-Lightweight

Vocal Microphone Extremely smooth, tailored response for a warm, natural sound. Excellent for touring professionals, the BETA®87C premium vocal microphone delivers studio-grade performance and a smooth, extended high-end frequency response in a cardioid condenser design. The microphone adds warmth to the frequency response and creates an ideal environment for personal monitoring. And its highly consistent cardioid pattern offers excellent rear rejection. Vocalists who use personal monitor systems such as Shure PSM® will appreciate how effectively the BETA 87C rejects ambient sound from the rear of the microphone. Features Smooth, wide frequency response, slight presence rise Uniform cardioid polar pattern for maximum isolation Minimum off-axis tone coloration Low-frequency roll-off compensates for proximity effect Three-stage pop filter minimizes breath pop and noise Break-resistant stand adapter Frequency response: 50 - 20,000 Hz

Gooseneck Microphones Gooseneck condenser microphones offer wide frequency response and accurate sound reproduction.Microflex® Standard Gooseneck microphones bring a whole new meaning to the word flexible with their fully adjustable gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

The BLX14/SM31 Headworn Wireless System is part of the BLX wireless systems family.<br>Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage. <br>Includes BLX4 wireless receiver, BLX1 bodypack transmitter, SM31 fitness headset microphone, power supply, clothing clip, windscreens, and user guide.<br>

The PGA81 cardioid condenser instrument microphone is a professional quality flat-response microphone featuring highly durable design and construction that delivers excellent sound. Ideal for use in sensitive acoustic instrument performance and recording, the PGA81 comes with a swivel adapter, carrying pouch and choice of with XLR cable,

Instrument cable connects the T1, UT1, SC1, BLX1, PG1, PGX1, GLXD1, QLXD1, SLX1, LX1, ULX1, UC1, UR1, UR1M and U1 body-pack trasmitter to a guitar or other instrument.<br> Features a 2.5 foot (0.75 m), length with 1/4-inch plug and 4-pin mini connector (TA4F) (supplied with instrument systems).

Vocal Microphone<br> Extremely smooth, tailored response for a warm, natural sound.<br> <br>Excellent for touring professionals, the BETA®87C premium vocal microphone delivers studio-grade performance and a smooth, extended high-end frequency response in a cardioid condenser design.<br> <br>The microphone adds warmth to the frequency response and creates an ideal environment for personal monitoring. And its highly consistent cardioid pattern offers excellent rear rejection.<br> <br>Vocalists who use personal monitor systems such as Shure PSM® will appreciate how effectively the BETA 87C rejects ambient sound from the rear of the microphone.<br> <br>Features<br> <br>-Smooth, wide frequency response, slight presence rise <br>-Uniform cardioid polar pattern for maximum isolation <br>-Minimum off-axis tone coloration <br>-Low-frequency roll-off compensates for proximity effect <br>-Three-stage pop filter minimizes breath pop and noise <br>-Break-resistant stand adapter <br>-Frequency response: 50 - 20,000 Hz

Performance Headset Condenser Microphone Durable cardioid condenser microphone in a comfortable headset for hands-free vocal performance. Ideal for multi-instrumentalists. The SM35 Performance Headset Condenser Microphone gives multi-instrumentalists the freedom to express themselves without sacrificing sound quality. A tight, unidirectional cardioid polar pattern provides excellent rejection of off-axis sound sources to prevent feedback and signal bleed onstage, whether in use in small clubs, large installations, or arena tours. Available in standard TA4F (TQG) connectivity, the SM35 seamlessly integrates into any Shure wireless headset system. Also available, the SM35-XLR includes an inline RPM626 preamp for use in standard wired (XLR) applications. Features Wireframe headset fits securely and comfortably for active performers and multi-instrumentalists Tight, unidirectional cardioid polar pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors Flexible gooseneck design allows for optimized placement that further improves source isolation Lightweight and low-profile form enables comfortable, long-wearing use TA4F (TQG) connector is compatible with any Shure wireless bodypack Locking snap-fit windscreens tame plosives, breath, and wind noise for clean and intelligible sound Tailored frequency response refined for clear, crisp vocal reproduction Included in BLX and GLX-D® wireless systems, renowned for their ease of use and reliable performance Legendary Shure precision engineering for durability and performance Headset microphone ideal for multi-instrumentalists in live vocal performance Condenser cartridge with cardioid polar pattern Available in both wireless TQG version that works with any Shure wireless bodypack and wired XLR version TQG model includes SM35, 2 windscreens, microphone clip, and user guide; XLR model includes the same items, plus a preamp

Our smallest and most portable system for an audience of up to 100. It has a six-speaker articulated line array, and it includes an integrated two-channel mixer with ToneMatch® presets on each channel. Carry it in one trip. Set it up in one minute. Fill the room with one system. For indoor applications only. Features High-performing, powered, portable two-way loudspeaker system with a 180° H x 40° V nominal dispersion designed for the production and reproduction of live music, music playback, speeches and A/V sound reproduction Articulated line array loudspeaker technology produces wide, uniform sound coverage throughout the entire listening area—even off to the extreme sides Curved array design provides 40° of vertical coverage Integrated ToneMatch® presets contain hardwired equalization curves for dynamic handheld microphones and acoustic guitars Lightweight, interlocking components for easy transport Offers both collapsed and extended setup positions Applications Houses of worship Schools and universities Resorts and hospitality venues Live music performances Business presentations Mobile DJs

Limited-edition 75th Anniversary Vintage-styled Dynamic Vocal Mic with Cardioid Polar Pattern<br> A sublime recreation for collectors, this serialized limited-edition vocal and speech microphone features superior sound performance and the classic large grille outer shell.<br> <br>Honoring a legacy that spans decades, the 5575LE Unidyne® Limited Edition 75th Anniversary Vocal Microphone is a modern version of the beloved classic Unidyne microphone. Shure has gone back to the original design to produce the 5575LE, the modern version of the most recognized microphone in the world, available in a numbered limited edition of 5575. Featuring Unidyne III cardioid cartridge technology for superior sound performance and the classic large grille outer shell, the 5575LE is of extraordinary aesthetic and performance value for collectors and performers alike.<br> <br>Features<br> <br>-Certificate of Authenticity features matching serialization and a tribute from Rose L. Shure, Chairman, Shure Incorporated <br>-Vintage desk stand features a retro design (zinc die-cast with silver finish) with 3 ft <br>-(1 m) right-angle XLR mic cable <br>-Aluminum flight case displays the 75th anniversary logo <br>-Collector's photos include a full-color print of the 5575LE, plus a black-and-white <br>-print of the vintage 55 Unidyne

The Shure BLX288UK/B58X-K14 offers professional vocal reproduction alongside rock solid wireless connectivity, allowing the freedom of the entire stage. The BLX288UK/B58 system provides the ideal solution when looking for vocal clarity in any situation where two handheld wireless microphones are required at the same time.<br><br> World renowned Beta 58A capsules feature a supercardioid pick up pattern and are ideal for close up vocals. A tailored frequency response ensures the precise and accurate reproduction of voice with a warm and rich tone. The BLX2/B58 transmitters features a lightweight design with rugged construction to stand up to the rigors of the stage.<br><br> The BLX88 receiver receives both handsets and has been designed for a quick setup, with user friendly intuitive controls making operation easy. Separate audio outputs are provided for each channel with individual control. Microprocessor controlled internal antenna diversity provides rock solid and dependable communication to the transmitters whilst the 'One touch-QuickScan' frequency selection system quickly locates the best open frequencies to battle any potential interference.<br><br> For a dual wireless system needed for close vocal work the Shure BLX288UK/B58 is the perfect choice for outstanding vocal tone and stage ready reliability.<br><br> The system includes: 1 x BLX88 dual channel receiver, 2 x BLX2/B58 handheld transmitters, 2 x microphone clips and 2 x power supplies.

When portability is required, FP Wireless and its intuitive, flexible components are the ideal solution. FP Wireless features proven wireless technology, including Shure patented Audio Reference Companding, for professional sound capture in demanding videography and electronic field production (EFP) environments.<br> <br>Includes FP1 bodypack transmitter, FP5 portable receiver, WL183 lavalier microphone, tie clip, camera shoe mount, TA3F-to-XLRm audio cable, TA3F-to-3.5mm dual-mono audio cable, 4 AA batteries, 2 vinyl bags, and user guide.<br>

Cardioid Dynamic Kick Drum Microphone The PGA52 is designed to deliver clarity in kick drum and low-frequency performance and recording applications. Available with and without a cable. The PGA52 is a professional quality kick drum microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments. Mountable microphone featuring swivel joint with quick-release latch for kick drum Dynamic cartridge (does not require phantom power) with cardioid polar pattern Tailored cartridge design for low-frequency clarity, including on bass amps Includes PGA52, zipper pouch and user guide

The PGADRUMKIT6 Drum Microphone Kit is an essential package of professional quality microphones, designed to provide excellent sound for full drum kit performance and recording.<br><br> What is included in the PGADRUMKIT6 Drum Microphone Kit?<br> <br>-1 x PGA52 Cardioid Dynamic Kick Drum Microphone <br>-2 x PGA56 Cardioid Dynamic Snare/Tom Microphones <br>-1 x PGA57 Cardioid Dynamic Instrument Microphones <br>-2 x PGA81 Cardioid Condenser Instrument Microphones <br>-3 x A25D Break-resistant Microphone Clip <br>-2 x AP56DM Break-resistant Drum Rim Mounts <br>-6 x XLR-XLR cables 4.6m <br>-Comes in a zippered carrying case

Passive 1-channel Multimedia DI with RCA, 3.5mm, XLR, and 1/4" Connectors The ProAV1 is a passive direct box,specifically developed with the audio-video integrator in mind. The ProAV1 features a variety of stereo inputs that are summed mono via a resistive mixer, greatly simplifying signal management.To eliminate the need for various adaptors, both units are equipped with a 'Swiss Army' array of connectivity options including 1/4" inputs for instruments, RCA and 3.5mm (1/8") connectors for CD players, iPods, video decks and computers. The ProAV1 also features a female XLR input for interfacing equipment with +4dB professional signal levels. The front panel connectors can also be used as thru-puts to allow multiple patch points.Custom wound Eclipse ET-DB2 transformers are able to withstand exceptionally hot signal levels while maintaining linearity from 20Hz to 20kHz. The resulting smooth Bessel curve is warm and natural, making them particularly adept at handling digital sources that can sound harsh. Transformer isolation further benefits by eliminating hum and buzz caused by ground loops or DC offset problems.

Remote + Mic Lightning Cable for SE Earphones with MMXC Connection<br> The Shure RMCE-LTG is a cable accessory designed to work with Shure SE earphones and compatible iOS devices. At one end, you'll find dual MMCX terminations for connecting your SE215, SE315, SE425, SE535 or SE846 Sound Isolating earphones. At the other end, an Apple Lightning connection point will allow you to plug directly into any compatible iOS device, including the latest iterations of the iPhone, which have so famously jettisoned the 3.5mm headphone jack.

Vivid sound with deep bass, the freedom of wireless, and the simplicity of Bluetooth.

SE846 Sound Isolating™ feature four high-definition drivers for extended high-end clarity and a groundbreaking low-pass filter for true subwoofer performance. Featuring a customizable frequency response and an innovative, detachable cable system, the SE846 Earphones provide a perfectly tailored listening experience.Four high-definition drivers for extended high-end clarity and a groundbreaking low-pass filter for true subwoofer performance in a convenient and portable package.Groundbreaking low-pass filter provides the previously unattainable deep low-end performance of a true subwoofer—without sacrificing clarity or detail.Adjustable frequency response for customizable sound signatures with removable metal nozzle and changeable nozzle inserts (balanced, warm, and bright options included).Detachable cable system enables multiple connectivity options for long-term device compatibility, upgrades, and ease of maintenance.Sound Isolating design blocks up to 37 dB of outside noise for immersive listening no matter where you are.

SE846 Sound Isolating™ feature four high-definition drivers for extended high-end clarity and a groundbreaking low-pass filter for true subwoofer performance. Featuring a customizable frequency response and an innovative, detachable cable system, the SE846 Earphones provide a perfectly tailored listening experience.Four high-definition drivers for extended high-end clarity and a groundbreaking low-pass filter for true subwoofer performance in a convenient and portable package.Groundbreaking low-pass filter provides the previously unattainable deep low-end performance of a true subwoofer—without sacrificing clarity or detail.Adjustable frequency response for customizable sound signatures with removable metal nozzle and changeable nozzle inserts (balanced, warm, and bright options included).Detachable cable system enables multiple connectivity options for long-term device compatibility, upgrades, and ease of maintenance.Sound Isolating design blocks up to 37 dB of outside noise for immersive listening no matter where you are.

The Bose B1 Bass Module is a passive low-frequency, portable speaker intended for use with the Bose L1 Model I & Model II Systems. The speaker enhances the low-frequency response, adding depth and bass to musical instruments, DJ rigs and other sound reinforcement applications. The B1 may be connected to the power stand of the L1 Model I and L1 Model II, or use the optional A1 amplifier to provide added power to a pair of B1 speakers.

Supercardioid Dynamic Microphone for Kick Drum and Bass Instruments<br> The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch", and delivers studio quality sound even at extremely high sound pressure levels.<br> <br>The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.<br> <br>Features<br> <br>-Frequency response shaped specifically for kick drums and bass instruments <br>-Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum <br>-Studio quality performance, even at extremely high sound pressure levels <br>-Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise <br>-Hardened steel mesh grille that resists wear and abuse <br>-Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration <br>-Neodymium magnet for high signal–to–noise ratio output <br>-Low sensitivity to varying load impedance <br>-Legendary Shure quality and reliability

The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch", and delivers studio quality sound even at extremely high sound pressure levels. The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring. Features Frequency response shaped specifically for kick drums and bass instruments Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum Studio quality performance, even at extremely high sound pressure levels Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise

The GLXD14UK/SM35 is a digital wireless headset microphone system featuring the SM35 condenser capsule. Offering outstanding quality vocal reproduction and hands free comfort this digital wireless system provides rock solid radio connectivity alongside dependable Shure reliability, allowing you to concentrate on the performance.

Developed by a brand trusted for music history’s greatest moments, the SRH144 Portable Semi-Open Headphones deliver extended range audio with enhanced high-frequency response. Features Semi-open ear cups provide natural sound reproduction Ultra-lightweight, collapsible design offers convenient storage and on-the-go use Adjustable, on-ear ear cups and padded headband ensure an ergonomic and secure fit

Mackie's Thump18S 1200W 18" Powered Subwoofer features a professional band-pass design that delivers class-leading output and deep, room-filling lows. Designed by the world's leader in portable live sound, the Thump18S provides ample power for your high-output applications, bringing your Mackie Thump or SRM system to an entirely new level. A full set of professional input/output connections provides simple integration and sonic optimization of any system. Plus, there's ample protection in place to protect your investment. With tons of power and a high-output/deep punch band-pass design, the Thump18S is the perfect subwoofer to complete your professional PA.<br><br> 1200W of Room-Shaking Low End<br>The Thump18S features a professional band-pass design for maximum output and deep, room-filling low end. The custom-designed 18" woofer is designed to handle the amazing power of the 1200W Class-D amplifier. Class-D amps run cooler than traditional designs, with minimal risk of thermal shutdown when used in hot venues or outdoor environments.<br><br> Total System Optimization<br>Optimized and tuned for ideal performance under the strenuous conditions of live sound applications, the Thump18S always sounds its best. A precision crossover (140Hz) is perfect for giving the right signal to the top boxes and highly-accurate tuning filters are in place to make sure you get powerful bass that sits right in the mix. There's even powerful system protection that automatically works when things get pushed too hard.<br><br> Application Flexible<br>Ready for professional applications, Thump18S features all the right I/O to get the job done. Dual XLR inputs handle mono or stereo sources while dual XLR full-range and high-pass outs deliver the output flexibility you need. User-adjustable level and polarity controls offer additional control.

Rack Mount brackets for Mackie RM 1642 VLZ recording mixer.

The Bose® L1 Model 1S Line Array - (B2 Bass Module and T1 Tone Match not included) **MUST PURCHASE BOTH THE LINE ARRAY AND POWERSTAND AS WELL AS EITHER A B1 OR B2 BASS MODULE**- Recommended for audiences up to 300, 12-speaker articulated line array delivers 180-degree horizontal sound coverage, Produces consistent tonal balance with less volume drop-off over distance. System's interconnecting pieces allow for easy transport, setup and breakdown. Includes: L1 Model 1S power stand and cord, L1 Model 1S top array and bottom extension, loudspeaker carrying bag.

The Shure Model 515SDX is a dual-impedance, cardioid (unidirectional) dynamic microphone that is suitable for speech pickup in schools, churches, and meeting rooms. Its unidirectional polar pattern greatly reduces feedback. The 515SDX mic includes a locking ON/OFF switch and an internal impedance selection socket mounted on the XLR connector for switching between high and low impedance. A slip-in swivel adapter is supplied for stand-mounted use.

This unmistakable stage icon features signature satin chrome-plated die-cast casing for vintage look and feel. A stage icon for 70 years, the Shure 55SH Series II Unidyne Vocal Microphone features a signature satin chrome-plated die-cast casing for pure vintage look and feel with modern acoustic components to meet today's performance standards. This microphone is excellent for vocal pickup with its characteristic Shure presence peak.<br> <br>The 55SH Series II microphone has a cardioid (unidirectional) polar pickup pattern that minimizes sound pickup from the rear of the microphone. This allows the Model 55SH Series II to be used in close proximity to loudspeakers without creating feedback problems, and it can perform under adverse acoustic conditions where omnidirectional microphones cannot.<br> <br>Features:<br> <br>-Classic appearance, modern performance <br>-Frequency response tailored for speech, vocals and instrumental music <br>-Cardioid directional pattern for optimum performance in adverse acoustic environments <br>-Shock-mounted cartridge minimizes stand-transmitted noise, ensures quiet operation <br>-Rugged die cast casing for reliability under rigorous conditions <br>-Self-tensioning swivel mount, permits tilting through 45 degrees forward and 80 degrees backward

Headworn Microphone<br> Adjustable headworn vocal mic with ultra-thin design. Built for demanding performance applications.<br> <br>The BETA®53 is a fully adjustable omnidirectional condenser headworn vocal microphone, designed for applications where unconspicuous appearance and incredible sound quality are required. Its lightweight, adjustable, modular headband, flexible wireframe and soft earpieces provide a comfortable fit while still allowing the Beta 53 to be positioned as close to the left or right corner of the mouth as possible, assuring maximum voice pickup. <br> <br>The Beta 53 microphone features an extended frequency response and high SPL handling ability. It is uniquely designed to provide the sound quality and performance consistency required for environments such as professional theater, event production, trade shows and seminars. <br>The Beta 53 now features improved RF immunity against cellular and RF devices.<br> <br>Features<br> <br>-Comfortable, latex-free earforms that hide behind the ears <br>-Thin, non-reflective wireframe that is easily hidden underneath hair <br>-Ultra-thin detachable microphone boom mount for right or left positioning Interchangeable frequency response caps (mild or high, two pieces each) <br>-Two foam windscreens included <br>-Clothing clip for securing cable <br>-Corrosion resistant <br>-Easy to clean <br>-Durable carrying case for protective storage <br>-Available with an in-line preamp or with a TA4F connector for wireless applications

The Blue enCORE 300 handheld condenser microphone lets you take Blue's proven studio quality straight to the stage! The beautifully distinctive-looking enCORE 300 features a premium, hand-tuned condenser capsule that gives you very clear, open, and detailed performance on vocals — and its cardioid pickup pattern makes this mic very effective at rejecting feedback and outside noise bleed. The combination of this amazing capsule, a custom phantom power circuit, and a unique reinforced chassis results in a stage-ready condenser mic that you can count on to deliver the goods — the enCORE 300!<br><br>The enCORE 300 is a flagship condenser performance microphone with its roots in Blue's legendary tuned condenser studio microphones. The enCORE 300's Aria Condenser Capsule is hand-selected and tuned for an open, detailed and present sound that is as well-suited to the stage as it is the studio.<br><br>Blue's engineers matched the capsule to a custom-designed phantom power circuit, and together these elements provide a rapid response and a great sound that is an ideal match for powerful vocals. The enCORE 300's unique reinforced chassis design mounts the capsule for optimal performance and isolation from handling noise, while providing vault-like protection for the Aria capsule to ensure years of breathtaking performances.

Microflex Boundary Microphone<br> Low profile, professional boundary microphone with interchangeable cartridges. In-line preamp.<br> Equipped with features like programmable, silent membrane switches, logic inputs and outputs, and LED indicators, Microflex® Boundary Microphones are the high-quality solution for a range of applications such as altars, boardrooms and distance learning centers. Every Microflex Boundary microphone features a choice of interchangeable condenser cartridges,<br>. MX391: Includes attached 4 meter (12 ft) cable terminated with a 4-pin mini connector and separate preamplifier. A rubber strain relief is provided for applications that require removing the 4-pin mini connector and connecting the mic cable directly to screw terminals in the preamplifier.<br><br> Features<br> <br>-Flat frequency response across the vocal range for uncolored sound <br>-Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application <br>-Sleek, low-profile design for unobtrusive appearance <br>-Balanced, transformerless output for increased immunity to noise over long cable runs <br>-Programmable on/off switch and LED on/off indicator (MX392/MX393 models only) <br>-LED logic input and switch logic output terminals for remote control or use with automatic mixers (MX392 models only)

MX392 and MX393 Microflex® Wired Boundary Microphones from Shure are equipped with features like programmable, silent membrane switches, logic inputs and outputs, and green LED indicators. The high-quality solution for a range of applications such as altars, boardrooms and distance learning centers, Microflex Boundary microphones feature interchangeable condenser cartridges.

Dynamic MicroDriver. The SE112 delivers great sound with deep bass and impressive sound isolation. The first step in an audio upgrade for portable digital devices, the SE112 features Sound Isolating sleeves in multiple sizes block outside noise up to 37 dB and provide a secure, comfortable fit.<br><br>Evolved from personal monitor technology that's been road-tested by pro musicians, the SE112 delivers detailed sound for personal listening or monitoring.<br><br>Features<br><br>Sound Isolating Design Comfortable sound isolating sleeves block up to 37 dB of ambient noise. Sound isolation technology prevents outside noise from interfering with your listening experience, whether onstage or on-the-go. Shure Sound Isolating Earphones require a proper fit to achieve the best sound.<br><br.Unmatched Personalization and Comfort. Ergonomic, Professional Design. Lightweight, low-profile shape with optimized nozzle angle is designed to rest comfortably in the ear. Over-the-ear configuration keeps cables out of the way.<br><br>Fit Kit Includes: Sound Isolating Sleeves<br><br>The role of the included sound isolating sleeves is twofold: blocking ambient noise and ensuring a comfortable customized fit. Because every ear is different, the Fit Kit includes three sizes (S, M, L) of the soft flex sleeves. Experiment with the size and style that creates the best fit for you. A good seal is key to optimizing sound isolation and bass response as well as maximizing comfort during extended wear.

SE846 Sound Isolating™ feature four high-definition drivers for extended high-end clarity and a groundbreaking low-pass filter for true subwoofer performance. Featuring a customizable frequency response and an innovative, detachable cable system, the SE846 Earphones provide a perfectly tailored listening experience.Four high-definition drivers for extended high-end clarity and a groundbreaking low-pass filter for true subwoofer performance in a convenient and portable package.Groundbreaking low-pass filter provides the previously unattainable deep low-end performance of a true subwoofer—without sacrificing clarity or detail.Adjustable frequency response for customizable sound signatures with removable metal nozzle and changeable nozzle inserts (balanced, warm, and bright options included).Detachable cable system enables multiple connectivity options for long-term device compatibility, upgrades, and ease of maintenance.Sound Isolating design blocks up to 37 dB of outside noise for immersive listening no matter where you are.

The SM63L is ideal for remote interviews and other situations where longer microphones are desirable. The smooth, wide frequency response is tailored for optimum speech intelligibility, and includes a controlled low-frequency rolloff for reduced pick-up of stand and wind noise. A built-in humbucking coil makes the microphone virtually immune to strong hum fields, such as those produced by studio lighting. Includes SM63L (champagne finish, 23 cm handle), swivel adapter, windscreen, carrying bag, and user guide.

Unidirectional condenser microphone designed for studio recording, broadcasting, and sound reinforcement. With its wide frequency response, low noise characteristics, and low RF susceptibility, the SM81 is the industry standard for applications involving acoustic instruments, especially guitar, piano, and cymbals. Includes SM81-LC, swivel adapter, windscreen, attenuator lock, carrying bag, and user guide.

Unidirectional condenser microphone designed for studio recording, broadcasting, and sound reinforcement. With its wide frequency response, low noise characteristics, and low RF susceptibility, the SM81 is the industry standard for applications involving acoustic instruments, especially guitar, piano, and cymbals. Includes SM81-LC, swivel adapter, windscreen, attenuator lock, carrying bag, and user guide.

Cover for SRM550 Loudspeaker with Durable Nylon Construction

Armed with a 15" low-frequency driver, Mackie's redesigned Thump15A features a Class D amplifier with their proprietary Dynamic Bass Response for a chest-thumping low end that's ideal for DJs and electronic musicians. The built-in two-channel mixer's Vita preamps are loaded with Wide-Z technology, effortlessly handling mic, instrument, and line-level signals. The Thump15A is a breeze to use, thanks to four application-specific speaker modes that tailor it to your situation. Additionally, the Thump15A's portable design makes for easy setup and tear down. Complete with a durable road-ready enclosure and robust system protection, The Mackie Thump15A is primed to handle any gig.<br><br>The Thump15A pumps out a massive amount of sound for its size. Its high-output woofer generates ample quantities of throbbing bass, and its 1.4" titanium dome driver ensures even, wide dispersion. Ultra-efficient Class-D amplification with Mackie's proprietary Dynamic Bass Response pushes plenty of power to the high-frequency compression driver and high-output woofer. And you don't need to worry about damaging your speaker, thanks to the Thump15A's next-generation system protection and thermal limiting.<br><br>Connecting your gear to the Thump15A is a piece of cake — its built-in two-channel mixer features Vita preamps with Wide-Z technology, so they accommodate microphone, line-level, and instrument signals. An XLR thru output makes for effortless wired connection to other Thump speakers, while flexible mounting options allow tripod- and pole-mounting, as well as stage monitor use.

Green foam windscreen for larger Shure "ball-type" microphones, such as the SM48, SM58®, Beta 58A®, or 565SD.

The ACC-R280S Rigging Kit is made specifically for your Mackie HD1801 loudspeaker. Suspending speakers is serious work that should only ever be done by certified, professional contractors - and they need qualified, professional mounting hardware to do the job right. Get the ACC-R280S Rigging Kit for your HD1801 loudspeaker, and your contractors will thank you for having the right tools for the job on-hand.

The Shure Microflex MX153 is a professional subminiature earset microphone ideal for speech and other applications requiring low-profile discreet placement where improved gain before feedback over lavalier microphones is desired. The SM58 is the industry standard microphone tailored to deliver warm and clear vocal reproduction. With analogue wireless dual transmission.<br> <br>MAIN FEATURES<br> <br>-Available Transmitter Form factors: Bodypack, Handheld Operating range (up to): 100m <br>-BLX1 <br>-Power and battery status LED <br>-Adjustable gain control <br>-Quick and easy frequency matching <br>-AA batteries (included) provide up to 14 hours of continuous use 100 m (300 ft.) operating range (line of sight) <br>-BLX2/SM58 <br>-Power and battery status LED Adjustable gain control Quick and easy frequency matching AA batteries (included) provide up to 14 hours of continuous use 100 m (300 ft) operating range (line of sight) Integrated microphone capsule design -10 dB gain attenuation Lightweight, rugged construction Color ID caps (available separately) BLX88 Up to 12 compatible systems (region dependent) Microprocessor-controlled internal antenna diversity One touch QuickScan locates the best open Frequency ¼" and XLR audio outputs Two color audio status indicator LED Green: Normal audio levels Red: Excessive audio levels (overload/clipping) MX153 Subminiature, omnidirectional cartridge offers superior speech clarity and enhanced plosive protection with no proximity effect Terminated with TQG/TA4F connector for direct connectivity to Shure wireless bodypack transmitters Ultra-lightweight, comfortable, flexible design is stable and easy to place over either ear CommShield® Technology guards against interference from cellular RF devices and digital bodypack transmitters Kevlar reinforced, attached soft flex cable Matte black, tan, and cocoa colour options available Includes protective storage pouch, 3 windscreens, and collar clip

12" Gooseneck Condenser Microphone, Inline Pre-Amp, Flange Mount, Cardioid, Black<br> <br>Centraverse™ Gooseneck Condenser Microphones are ideal for use in installed sound reinforcement applications, including corporate facilities, houses of worship, and government institutions. Dual-section gooseneck provides full articulation and easy placement options.<br> <br>Features<br> <br>-Cardioid polar pattern with tailored response for speech <br>-CommShield® Technology that guards against unwanted RF interference from <br>-Portable wireless devices (smartphones, etc.) and offers high resistance to intense nearby radio signals <br>-Frequency response ideal for capturing fast transients in a wide variety of locations, including podiums and desktops <br>-Superior Shure design and rugged, dependable construction

The Blue Microphones enCORE 100i makes sure you don't have to! Priced to fit right into your budget, and designed to perform with industry all-stars, the enCORE 100i joins Blue's groundbreaking live mic series. This is the perfect microphone for capturing all kinds of instruments onstage. <br><br> It's specifically designed to have a tighter polar pattern, so it'll pick up just what you want, without those issues with bleed. And its custom circuit (with transformer) and highpass filter give it an optimized frequency response for capturing drums, amplified instruments, and vocals. And, of course, Blue gave the enCORE 100i a super-rugged grille to protect it from strikes, while making sure this microphone stayed small enough to mount in the tightest of spaces. With the performance of a high-dollar microphone, offered at a truly unbelievable price, the Blue enCORE 100i is your way to get studio-grade tone when you're performing live.

Phantom Powered Dynamic handheld live performance mic w/mic clip and carrying bag, Black finish

Achieving the sound quality demanded by elite performers and venues no longer requires sacrificing the rugged reliability of a dynamic microphone. The KSM8 Dualdyne features a patented cartridge design with two ultra-thin diaphragms and groundbreaking reverse airflow technology.

Designed to capture clear, high-quality sound, the MOTIV MV88 from Shure is a stereo condenser microphone that directly connects to any iOS device equipped with a Lightning connector. The professional-quality microphone offers up to 24-bit/48 kHz resolution with a frequency response of 20 Hz to 20 kHz. The microphone element offers a 90° hinge and left/right rotation for flexible audio and video recording options.

It is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or off-white finishes, and with in-line or plate mount preamps, MX202 Microflex® Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

Passive Stereo DI with Isolation Transformer, 15dB Pad, and Lift Switch The Radial ProD2 is a compact stereo direct box developed specifically to address the needs and challenges of interfacing a stereo keyboard to a professional audio system. This passive DI features two independent channels with separate inputs and thru-puts for the artist's stage amp and two fully isolated outputs for the PA system. At the heart of the design are two high performance Eclipse ET-DB2 transformers. These deliver 20Hz to 20kHz performance with less than 1.5dB deviation above 18kHz and are able to withstand tremendous signal levels without distortion. Unlike active circuits that overload when the signal exceeds the rail voltage, transformers saturate. This creates a pleasing effect that naturally rounds out the tone, acting like a subtle limiter which is particularly advantageous when interfacing the ProD2 with digital pianos, samplers and drum machines that can produce excessive dynamics. Transformers are particularly adept at eliminating hum and buzz caused by ground loops. As with all Radial products, the ProD2 is built tough to handle the rigors of professional touring. A 14-gauge steel ultra rigid i-beam skeleton frame eliminates opportunity from outside stress to flex the sensitive PC board and cause premature solder joint failure. The innovative book-end design creates a protective zone around the connectors and switches further increasing lifespan. And a full bottom no-slip pad adds mechanical isolation and electrical insulation to further reduce opportunity for noise. The Radial ProD2's warm sound, legendary build quality and compact design have made it the most popular stereo direct box made today.

Replacement grille for the Shure SM58 wired microphone and SM58 wireless handheld transmitters.

Triple High-Definition MicroDrivers. The SE535 utilizes a dedicated tweeter and dual woofers to deliver spacious sound with rich bass. A detachable cable with formable wire enables easy replacement, both extending the life of your investment and providing a secure, comfortable fit. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation, and a wide assortment of accessories offer premium customization.<br><br>Evolved from personal monitor technology road-tested by pro musicians and fine-tuned by Shure engineers, SE535 earphones deliver an unparalleled listening experience, allowing you to hear the details of your music like never before.<br><br>Features<br><br>Sound Isolating Design Comfortable sound isolating sleeves block up to 37 dB of ambient noise. Sound isolation technology prevents outside noise from interfering with your listening experience, whether onstage or on-the-go. Shure Sound Isolating Earphones require a proper fit to achieve the best sound.<br><br>Unmatched Personalization and Comfort. Ergonomic, professional design Lightweight, low-profile shape with optimized nozzle angle is designed to rest comfortably in the ear. Over-the-ear configuration keeps cables out of the way.<br><br>Detachable Cable with Wireform Fit. Durable Kevlar™ reinforced cable allows easy replacement or customization. Formable wire ensures secure placement, and over the ear configuration keeps cables out of the way. Gold-plated MMCX Connector has a lock-snap mechanism allowing 360 degree rotation for comfortable fit.<br>Premium Fit Kit Includes: Sound Isolating Sleeves The role of the included sound isolating sleeves is twofold: blocking ambient noise and ensuring a comfortable, customized fit. Because every ear is different, the Fit Kit includes three sizes (S, M, L) of the flex and black foam sleeves as well as 1 pair of triple flange and 1 pair of universal fit yellow foam sleeves. Experiment with the size and style that creates the best fit for you.

The SRM750 adds a powerful main speaker to Mackie's 1,600-watt SRM powered PA speaker lineup. Loaded with twin 15" woofers and a 1.4" titanium tweeter, the SRM750 gives you punchier lows while providing the high-end clarity you need for any sound-reinforcement application. A 2-channel mixer provides plenty of connectivity, while the onboard Feedback Destroyer keeps your sound clean, and four Speaker Modes automatically EQ your output to fit the gig. And when it comes to roadworthiness, you can't beat the SRM750's internally braced, all-wood cabinet and tough 18-gauge steel grille - it's everything the Customer's expects from Mackie's Built-Like-A-Tank reputation!<br><br>What do you get when you combine two 15" woofers and 1,600 watts of system power in an internally braced all-wood cabinet? The jaw-dropping punch and crystal-clear sound of the Mackie SRM750, that's what. Stick them on a poles, set them on the stage, or fly them from the trusses - it's all good. And if you demand even more earthshaking power from your PA, stack your SRM750s on set of SRM2850 dual 18" subwoofers, and you'll really get the crowd jumping.<br><br>While the high power and performance of the SRM750 is perfect as part of your main rig, the flexible XLR/TRS combo inputs and RCA inputs make it a great speaker for solo use. Connect your drum machine, your guitar, or a vocal microphone, and you're ready to go. Mackie's Wide-Z inputs and High-Definition Audio Processing optimize the sound of anything you plug into them. Smart Protect DSP will step in and protect your speaker when it gets pushed a little too hard. The Mackie SRM750 is a versatile, road-ready powered speaker that you can depend on.

The omnidirectional pickup pattern provides uniform pickup on or off axis, eliminating the need for critical microphone positioning. The VP64A series also features a tailored frequency response with an upper midrange presence rise that adds crispness and clarity to speech. The cartridge utilizes a neodymium magnet for higher output and increased signal-to-noise ratio. An internal rubber isolation mount protects the microphone cartridge and minimizes handling noise. A water-resistant mesh grille allows the microphone to be used during the most challenging weather conditions. The supplied windscreen further reduces "pop" and wind noise.

Rack Mount brackets for Mackie 1402 VLZ Pro recording mixer.

14-ch Analog Mixer with 6 Onyx Mic Preamps, 4 x Stereo Channels, 2 x Aux Sends Per Channel, and 6 x Channel Inserts<br><br>VLZ4 Multi-Channel Compact Mixers A legend in compact mixer design, performance and durability, Mackie VLZ is the original no-nonsense mixer series. Offering more bang for your buck, the redesigned VLZ4 line now includes Mackie's industry-proven Onyx preamps for crystal-clear sonic clarity. The comprehensive VLZ4 line delivers the proven feature set, high-headroom/low-noise design and "Built-Like-A-Tank" construction that created an industry more than 20 years ago. From every input to every output, VLZ4 is optimized to deliver professional-quality results each and everytime.<br><br>Maximum Usability<br>The new VLZ4's feature a sleek black powder coat finish and cockpit-inspired controls. Colorful high-contrast knobs optimizes the VLZ4's usability in low-light scenarios as well as feature a radical, ergonomic taper that provides all the tactile control you need all while keeping the mixer footprint as small as possible.<br><br>Built Like A Tank<br>Mackie VLZ4 mixers are truly "Built Like A Tank." Show to show the VLZ4 is made to keep on working no matter what gets thrown at it. Features like a nearly indestructible steel wrap-around chassis and grime-resistant rotary sealed pots make the Mackie VLZ4 mixer a solid investment.<br><br>Comprehensive Lineup<br> The comprehensive VLZ4 line offers mixers of every channel count for every application. From the 402VLZ4 which is perfect for desktop applications to the tour-ready 3204VLZ4 there is a VLZ4 mixer ready for any situation.

Mackie is a Proven Leader in Analog Mixers<br><br>Beyond sounding great, the Mackie 1642VLZ4 mixer is one piece of gear you can truly rely on. It continues the VLZ Series' trend for rock-solid construction, while taking your sound quality to a new level. You've got an amazingly wide dynamic range, incredible 60dB gain range on the Onyx microphone preamplifiers, and ultra-low-noise performance. The 1642VLZ4 also boasts better-than-ever RF rejection for prime performance in broadcast situations. And with high-resolution meters, generous I/O, and sealed rotary controls that keep out dust and grime, the Mackie 1642VLZ4 is one of Mackie's best mixers ever.<br><br>Mackie 1642VLZ4 16-channel Mixer at a Glance:<br>-Premium-quality mixer with proven components<br>-Sealed rotary controls ensure long-term reliability<br>-Incredible sound quality<br><br>Premium-quality mixer with proven components<br>The Mackie 1642VLZ4 is, first and foremost, a Mackie mixer. It houses 10 of Mackie's premium-quality Onyx mic preamps for natural, transparent sound. Its first eight mic/line channels are equipped with 3-band EQ with sweepable mids (non-sweepable on the last four channels). Signal routing is easy and flexible. On top of all that, the Mackie 1642VLZ4 is built Mackie-tough - trust this mixer to perform even in the most harrowing situations.<br><br>Sealed rotary controls ensure long-term reliability<br>Sure, the Mackie 1642VLZ4 mixer will shrug off bumps, drops, and outright abuse, but what about spills or rain? Thankfully, the 1642VLZ4 boasts sealed rotary controls that resist grime, dust, and anything else that may spill onto your mixer. We're not saying it's fully waterproof, but it's an extra level of protection you'll eventually be very glad you have when you're running live sound in a hectic environment.

Beyond sounding great, the Mackie 2404VLZ4 mixer is one piece of gear you can truly rely on. It continues the VLZ Series' trend for rock-solid construction, while taking your sound quality to a new level. You've got an amazingly wide dynamic range, incredible 60dB gain range on the Onyx microphone preamplifiers, and ultra-low-noise performance. The 2404VLZ4 also boasts effects DSP with two internal FX sends, and even a 4 x 2, 24-bit USB audio interface for easy, high-quality recording. And with high-resolution meters, generous I/O, and sealed rotary controls that keep out dust and grime, the Mackie 2404VLZ4 is one of Mackie's best mixers ever. Mackie 2404VLZ4 24-channel Mixer at a Glance: Premium-quality mixer with proven components Sealed rotary controls ensure long-term reliability Incredible sound quality Built-in 32-bit RMFX+ Effects Easy recording with built-in 24-bit USB audio interface Premium-quality mixer with proven components The Mackie 2404VLZ4 is, first and foremost, a Mackie mixer. It houses 20 of Mackie's premium-quality Onyx mic preamps for natural, transparent sound. Its mic/line channels are equipped with 3-band EQ with sweepable mids. Signal routing is easy and flexible. On top of all that, the Mackie 2404VLZ4 is built Mackie-tough - trust this mixer to perform even in the most harrowing situations. Sealed rotary controls ensure long-term reliability Sure, the Mackie 2404VLZ4 mixer will shrug off bumps, drops, and outright abuse, but what about spills or rain? Thankfully, the 2404VLZ4 boasts sealed rotary controls that resist grime, dust, and anything else that may spill onto your mixer. We're not saying it's fully waterproof, but it's an extra level of protection you'll eventually be very glad you have when you're running live sound in a hectic environment. Incredible sound quality VLZ stands for "very low noise", and that's just part of the appeal of the Mackie 2404VLZ4 mixer. In all you've got a 128.5dB dynamic range,

The Mackie 802VLZ4 8-Channel Ultra-Compact Mixer features Onyx microphone preamps in a desk-friendly, ultra-compact design, suitable for professional applications with a lower input need. From every input to every output, the mixer is designed to provide the highest headroom and lowest noise possible for maximum signal integrity.<br><br>The mixer is built-like-a-tank with a rugged solid-steel chassis and high-contrast controls for tactile control. With features like instrument level inputs, phantom power, and level metering, the 802VLZ4 offers a true step-up performance and durability that is suitable for your professional applications.<br><br> 8-Channel mixer featuring high-headroom, low-noise design<br><br>3 Boutique-Quality Onyx Microphone Preamps:<br>- Wide 60 dB gain range<br>-128.5 dB dynamic range<br>+22 dBu line input handling<br>-Extended frequency response<br>-Distortion under 0.0007% (20 Hz to 50 kHz)<br>-Improved RF rejection, suitable for broadcast applications<br>-Phantom power for condenser microphones<br>-Eight high-headroom line inputs<br>-Selectable instrument inputs on first 2 channels; <br>-no DI box needed<br>-3-Band EQ (80 Hz, 2.5 and 12 kHz) <br>-18 dB/octave<br>-100 Hz low-cut filter on microphone input channels<br>-AUX send, level, pan, and PFL solo on each channel<br>-Stereo return for connecting FX processor or other stereo source<br>-ALT 3/4 stereo bus for added routing flexibility<br>-Control room / phones source matrix<br>-High-resolution 12-segment stereo meters<br>-Sealed rotary controls resist dust and grime<br>-Built-like-a-tank rugged steel chassis with powder-coat finish<br>-High-visibility, high-contrast controls deliver convenient at-a-glance visual feedback<br>-Universal power supply for worldwide use<br><br> Applications: Live sound mixing, houses of worship, clubs, gymnasiums, banquet halls, conference rooms, boardrooms, studio and field recording, multimedia applications, broadcast, and many more

Miniature Cardioid Condenser Microphone<br> Precision-engineered for professional drum and instrument in live and studio applications. Two configurations available.<br> The Shure BETA®98A is a precision-engineered compact, high-output miniature condenser microphone for professional sound reinforcement and studio recording. An extremely uniform cardioid polar pattern provides excellent gain-before-feedback and off-axis rejection of unwanted noise.<br> Both Beta 98A configurations feature high sound pressure level capability (SPL). Beta 98AD/C includes A98D drum mount with flexible gooseneck that makes it an essential, accurate choice for toms, snares, and percussion. Beta 98A/C is recommended for a variety of acoustic or amplified instruments including drums, piano, reed, wind, and strings.<br><br> Features<br> <br>-Uniform cardioid polar pattern provides maximum gain-before-feedback and rejection of off-axis sound for smooth high-end response and control <br>-Frequency response tailored for drums and percussion applications with a wide dynamic range for use in high SPL environments <br>-Precision-engineered design for unobtrusive microphone footprint Beta 98A models ship with external in-line preamplifier for discreet cable placement, snap-fit windscreen, and zipper pouch <br>-Beta 98AD/C ships with A98D drum mount featuring a flexible gooseneck for precise placement and secure attachment <br>-Beta 98A/C ships with RK282 shock mount swivel adapter for attachment to any standard microphone stand

The Shure BLX14UK/MX53-K14 Wireless Headset System is a high quality analog wireless system, perfect for vocalists, multi-instrumentalists and spoken word presenters. The system includes the professional Microflex MX153 Ear-Worn Condenser Microphone, along with the reliable BLX1 Bodypack Transmitter and BLX4 Wireless Receiver, offering superior hands-free performance for a wide range of applications.

2-way Passive Speaker with 200W Capacity, 10" Woofer, and 1.4" Titanium Dome Tweeter<br><br>The passive Mackie C200 speaker contains a 10" high-efficiency woofer and 2" voice coil that deliver a wide 59Hz-22kHz frequency range. The C200 speaker's 1-2/5" compression driver is mounted on a waveguide that creates a wide 90° x 80° dispersion. The Mackie C200 has a 500W peak handling at 8 ohms.<br><br>The Mackie C200 speaker is also flyable, tiltable, and pole-mountable. The C200 delivers optimum performance in portable PA, stage monitor, and permanent/flown applications. The Mackie speaker's rugged, injection-molded composite cabinet makes it a solid performer on the road, and its unique shape prevents unwanted vibrations and standing waves from forming inside the speaker cab, while making it perfect as a side, tilt-back stage monitor. Other features include precision transducer components, unique Low-Impedance Compensated Crossover design, and wide dispersion to assure every audience member has a great seat.<br><br>Precision Tuned by the Speaker Brains at EAW Mackie's C Series passive loudspeakers represent Mackie's first lightweight passive speakers tuned exclusively by the EAW loudspeaker engineering team-a team with more than 25 years of high-output loudspeaker expertise, having created loudspeaker systems for critical applications as diverse as the Super Bowl, Iron Maiden, and the Pope. Although loudspeakers for these mega-systems cost exponentially more than the stalwart C200, many of the same concepts have been applied, namely: designing custom 10" LF drivers with a frequency range from 59Hz-3000Hz and a 2" voice coil that can take a pounding. It also has a 1.4" high-frequency titanium driver and horn providing a wide, controlled dispersion pattern, and precise reproduction of the critical 1000Hz-20,000Hz upper mid-range and high frequencies.<br><br>

This accessory cable transforms your detachable Shure Earphones (SE215, SE315, SE425, SE535) into a stereo mobile headset, providing inline microphone and controls for music-enabled phones and portable devices. Kevlar reinforced cables offer even more durability. Two versions are available based on device compatibility. Integrated three-button remote and mic allows you to adjust the volume, control music and video playback, record voice memos, and answer or end calls. Remote and mic supported only by: iPod nano (4th and 5th generation), iPod classic (120GB, 160GB only), iPod touch (2nd and 3rd generation), iPhone 3GS, iPhone 4/4S, iPhone 5, and iPad. The remote is supported by iPod shuffle (3rd generation). Audio is supported by all iPod models. Requires latest iPod software.

Boundary Condenser Microphone, 12’ Cable, Cardioid, Black<br> <br>Designed for desktop-installed sound reinforcement applications, Centraverse™ Boundary Condenser Microphones seamlessly fit within any design aesthetic. They offer low-profile, discreet placement for corporate facilities, houses of worship, government institutions, and beyond.<br> <br>eaturing Commshield® Technology, which guards against unwanted RF interference from portable wireless devices, Centraverse microphones deliver in best-in-class performance and reliability.<br> <br>Features<br> <br>-Available in cardioid or omnidirectional polar patterns <br>-CommShield® Technology that guards against unwanted RF interference from portable wireless devices (smartphones, etc.) and high resistance to intense nearby radio signals <br>-Available in black with attached 12’ XLR cable <br>-Frequency response ideal for capturing fast transients in a wide variety of locations, including podiums and desktops <br>-Superior Shure design and rugged, dependable construction

The Shure GLXD14UK/SM31 Wireless Headset System is a high quality digital wireless system, perfect for use in fitness and aerobics instruction. The system includes the versatile SM31 Cardioid Condenser Headset Mic, along with the reliable GLXD1 Bodypack Transmitter and GLXD4 Wireless Receiver, offering superior hands-free performance for a wide range of applications.

The black H6 Omnidirectional Headset with Detachable Cable and TA4F Connector for Shure or Beyerdynamic Wireless Transmitters from Countryman is a low-profile headset microphone that combines the transparent sounding E6 Earset with a comfortable, lightweight, and adjustable headframe. Weighing less than one-tenth ounce, it can be used as a water- and wind-resistant mic for capturing audio in houses of worship, theater, and outdoor vocal and speech applications.

Great for active instruments like guitars and basses with active pickups and preamps, the MDB-1A Active DI features increased headroom and distortion-free operation. Featuring a 1/4" high-impedance input and thru with -20db pad plus a Merge switch that turns the Thru jack into a second input, perfect for summing a stereo source to a mono output. The balanced XLR output features switches for Polarity, Low Cut, and Ground Lift. For maximum convenience, the MDB-1A is powered by 48v phantom power.

Stereo Direct Box Optimized for Consumer Device Audio, The Radial Stage Bug SB-5 is a compact stereo direct box designed to accommodate laptop computers, tablets and other consumer audio products when amplifying the signal through a PA system. The passive design begins with an integrated input cable that connects from the headphone out via a flexible 1.5m (5') cable that is terminated with a standard 3.5mm (1/8") stereo connector. The cable is secured via a clamping strain relief and is wrapped using the sidewinder cleat for easy storage. This of course eliminates having to locate a cable making it easier to deploy in fast paced work environments. Inside, the unbalanced stereo signal is sent to a pair of custom wound transformers which balances the signals for long cable runs - upwards to 100 meters (300'), without noise. Transformers further benefit by isolating the computer from the PA system to help eliminate hum and buzz caused by ground loops. This is augmented with a ground lift switch to further reduce ground contamination. A choice of output connectors is available including a stereo set of ¼" TRS jacks for full stereo operation or an XLR out that automatically sums the left-right program material to mono. This can save valuable channels on the PA system and makes setup easier in situations where full stereo reproduction is not required. A -15dB input pad may be engaged to reduce sensitivity and enable extra high output sources to be connected without distortion. These features combine to make the SB-5 the perfect tool-kit DI for the AV technician, media manager or traveling musician equipped with a computer.

Isolation mount and swivel adapter securely attaches Beta 98 and Beta 98A microphones to standard microphone stands.

SE215 Sound Isolating™ Earphones provide award-winning sound in a secure, over–the-ear design for long-lasting comfort and immersive audio. Available in wireless and wired versions with detachable cables in multiple color options.

The SE535LTD utilizes a dedicated tweeter and dual woofers to deliver spacious sound with rich bass. Two detachable remote + mic cables enable you to connect to Apple products or other music-enabled phones. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation, and a wide assortment of accessories offer premium customization.<br><br>Evolved from personal monitor technology road-tested by pro musicians and fine-tuned by Shure engineers, SE535LTD earphones in limited-edition red deliver an unparalleled listening experience, allowing you to hear the details of your music like never before.<br><br>Features<br><br>The Limited Edition SE535 features advanced mic controls and an exclusive red color.<br><br>Detachable Remote + Mic Cables:<br><br> M Cable. Integrated one-button remote and mic allows you to answer or end calls and switch back to audio. Works with most music-enabled phones with a 3.5 mm jack including Google Smartphone.<br><br>M+ Cable: Integrated three-button remote + mic allows you to adjust the volume, control music and video playback, and answer or end calls on Apple iOS devices. Made for iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPad Air, iPad mini with Retina display, iPad (4th generation), iPad mini, iPad (3rd generation), iPad 2, iPad, iPod touch (2nd through 5th generation), iPod classic, iPod nano (4th through 7th generation) and iPod shuffle (1st through 4th generation). Made for Apple iPod, iPhone, and iPad

Vocal Microphone<br> Tuned to accentuate the warmth and clarity of lead and back-up vocals, the SM58 is a legendary live vocal microphone known for its rugged reliability on tour.<br><br> Features:<br> <br>-Frequency response tailored for vocals, with brightened midrange and bass rolloff <br>-Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise <br>-Pneumatic shock-mount system cuts down handling noise <br>-Effective, built-in spherical wind and pop filter <br>-Supplied with break-resistant stand adapter which rotates 180 degrees <br>-Legendary Shure quality, ruggedness and reliability <br>-Cardioid (unidirectional) dynamic <br>-Frequency response: 50 to 15,000 Hz <br>-Replacement cartridge: R59 <br>-Handheld microphone ideal for live vocals <br>-Dynamic cartridge with cardioid polar pattern <br>-Available with or without a cable and On / Off switch, and available in wireless versions <br><br>Includes SM58, microphone clip, storage bag, and user guide.The legendary Shure SM58 vocal microphone is designed for professional vocal use in live performance, sound reinforcement, and studio recording. Its tailored vocal response for sound is a world standard for singing or speech. A highly effective, built-in spherical filter minimizes wind and breath "pop" noise. A unidirectional (cardioid) pickup pattern isolates the main sound source while minimizing unwanted background noise.<br> Rugged construction, a proven shock-mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently, outdoors or indoors.<br>

Mackie's gone the extra mile for you with the SRM350v3 active speaker. The newest generation of SRM speakers gives you 1000 watts packed into Mackie's rugged, lightweight molded enclosure along with powerful digital audio processing to match. An on-board mixer, one-button tone shaping, feedback elimination, and thru-put signal routing options makes the SRM350v3 the most powerful component of your rig but stays convenient and easy-to-use. Lighten your load-in, update your PA, and let the speaker do some of the work, add a Mackie SRM350v3 active speaker to your rig!<br><br>Having an active speaker or two on hand is always a good idea for a gigging musician and they don't get much more versatile than the SRM350v3. You're always coffeehouse-gig ready with an on-board mixer that has two channels of Mackie's Wide-Z preamps to handle your mics and instruments and RCA inputs for tracks or music between sets. If you're called to play a Saturday with the band at the local pub (or for rehearsal), you won't have to worry about walking into a bad monitoring situation. Do what Sweetwater players do and take your SRM305v3, its perfectly designed 'monitor-wedge' cabinet and one-button monitor mode audio processing have you covered.<br><br>The SRM350v3 does all the work that your old front of house rack took care of. The one-button High-Definition Audio Processing mode selection applies processing that makes the speaker bump for DJs or boosts vocals for your solo gigs. The automatic Feedback Destroyer keeps the squeals out of your show and you don't have to chase EQ settings all night. Mackie's proprietary Smart Protect DSP keeps your speaker safe and reels you back in if you get pushy with the master fader.<br><br>With all the awesome there is to the SRM350v3, you almost forget that it's a great-sounding speaker too! The precision 2-way crossover feeds a 10" neodymium woofer and a 1.4" titanium dome compression driver giving you exceptional clarity and performance

Armed with a 12" low-frequency driver, Mackie's redesigned Thump12A features a Class D amplifier with their proprietary Dynamic Bass Response for detailed midrange and abundant bass that are ideal for small venues, such as coffeehouses. The built-in two-channel mixer's Vita preamps are loaded with Wide-Z technology, effortlessly handling mic, instrument, and line-level signals. The Thump12A is a breeze to use, thanks to four application-specific speaker modes that tailor it to your situation. Additionally, the Thump12A's portable design makes for easy setup and tear down, which will save time and make life easier. Complete with a durable road-ready enclosure and robust system protection, The Mackie Thump12A is primed to handle any gig.<br><br>The Thump12A pumps out a massive amount of sound for its size. Its high-output woofer generates ample quantities of throbbing bass, and its 1.4" titanium dome driver ensures even, wide dispersion. Ultra-efficient Class-D amplification with Mackie's proprietary Dynamic Bass Response pushes plenty of power to the high-frequency compression driver and high-output woofer. And you don't need to worry about damaging your speaker, thanks to the Thump12A's next-generation system protection and thermal limiting.<br><br>Connecting your gear to the Thump12A is a piece of cake — its built-in two-channel mixer features Vita preamps with Wide-Z technology, so they accommodate microphone, line-level, and instrument signals. An XLR thru output makes for effortless wired connection to other Thump speakers, while flexible mounting options allow tripod- and pole-mounting, as well as stage monitor use.<br><br>The Thump12A divides high and low frequencies using a precision two-way crossover, while also time aligning the signals so that your audience hears low and high frequencies in sync. And you'll always sound your best, thanks to application-specific speaker modes that optimize your system for your situation.

End-Address Shotgun Condenser Microphone Features interchangeable long, medium, and short capsules for critical broadcast and media production applications. The VP89 is a professional shotgun condenser microphone for use in critical broadcast and media production applications. Designed with interchangeable long, medium, and short capsules, the VP89 models provide scalable, superior off-axis rejection for focus and flexibility in a wide variety of on-site locations.

The Shure VP89S Modular Shotgun Microphone features an interchangeable capsule that displays high RF (Radio Frequency) rejection, superior side noise rejection, and is paired with the detachable VP89 Preamp. Long, short and medium sized capsule barrels are available to suite various recording needs, rejection angles and frequency response types. This model ships with the short capsule, and includes a windscreen and zippered pouch. The state-of-the-art low noise preamplifier design features a low frequency roll-off switch for eliminating noise below 200Hz. The usefulness of the microphone can be further extended by buying one of the other length capsule and simply attaching it to the already included preamp. State-of-the-art preamplifier redesign Superior RF immunity Internal low-frequency roll-off Recessed low-cut filter switch for additional control Smaller footprint Superior Shure design and rugged, roadworthy construction

Instrument cable, right-angled 3.5" Jack to 4-pin mini connecter, compatible with all Shure bodypack transmitters.

Molded plastic padded carrying case for compatible Shure wireless systems

Integrated amplifier and stand for Bose L1 Model 1S speakers.

The B2 bass module delivers the most low-frequency output for L1® system users who need more powerful bass for larger audiences. The rugged enclosure encases two 10-inch woofers. A switch on the rear panel offers the flexibility of three output levels, depending on application or preference. The L1 system automatically senses and equalizes the chosen setting for optimized performance. The normal setting is ideal for bass guitar or when miking a kick drum. A higher setting is designed for DJ/music playback applications. And the lower setting works well for acoustic guitar and vocals. Interlocking end caps allow two B2 bass modules to be stacked together. Included slip cover protects the module from dings and scratches during transport. Compatible products L1® Model II system L1® Model 1S system

Heavy-duty steel construction. Four casters, two lockable. Angle adjustable to 45° with spring-loaded locking mechanism. 12 space units in top section, 9 in lower section. Cage nuts incl. (32 pcs.). Rack shelves, drawers, blank and ventilation panels are

The BLX188/MX53-K14 Dual Channel Headset Wireless System is part of the BLX wireless systems family. Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage. <br><br>Includes:<br><br>-BLX88 dual-channel receiver<br>-2 BLX1 bodypack transmitters <br>-2 MX53 headset microphones<br>- 2x microphone clip<br>- windscreens, and user guide.

The Mackie DL Dante Expansion card connects the DL32R 32-Channel Digital Live Sound mixer to any Dante-enabled audio network. Dante is the de facto standard in digital audio networking, delivering unmatched audio quality, extremely flexible routing and offers significant cost savings compared to traditional analog cable runs. With 32x32 channels of Dante I/O, the user can route Dante inputs like microphones and other sources to any channel on the DL32R. It's also perfect for sending any DL32R signal to Dante enabled loudspeaker systems and amplifiers. The card features dual Dante ports for daisy chaining or system redundancy and a dedicated Wi-Fi control port that eliminates the need for an Ethernet switch in many situations. The DL Dante Expansion Card includes Dante Virtual Sound Card, which enables multi-tracking recording / playback between Dante and a Mac or PC. With flawless interoperation with hundreds of Dante-enabled products and a rock solid, glitch-free operation, the DL Dante Expansion Card truly expands the DL32R's functionality and application-flexibility in any professional environment.

Digital Large-Diaphragm Condenser Microphone With both an integrated kickstand for tabletop use and a microphone stand adapter for traditional mounting, the versatile MV51 delivers great audio quality in a vintage design.<BR> <BR>Made for iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad (4th generation), iPad mini, iPod touch (5th generation).<BR> <BR>iPad, iPhone, iPod, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air, iPad mini, and Lightning are trademarks of Apple Inc.<BR> <BR>Features<BR> <BR>Includes a 1" microphone capsule element for best-in-class audio Connects directly to any iOS device: no adapters required Offers 5 DSP preset modes (Speech, Singing, Flat, Acoustic Instrument, Loud) that automatically optimize EQ, compression and limiting for the sound source and environment<BR> <BR>Features all-metal construction engineered to withstand the most demanding recording conditions

The black MOTIV MV5 from Shure is a portable digital condenser microphone that has a detachable desktop stand. It can be used to capture audio on Mac or Windows computers, iPods, iPhones, iPads, and Android/iOS devices in applications such as music, podcasting, video chats, and more.<BR> <BR>The MV5 microphone features a low-profile design and allows you to monitor in real time via its integrated headphone output jack. It is built with an integrated thread mount that is compatible with any 1/4" standard camera tripod. <BR>The following cables are also included: a Micro-B-to USB cable, and a Lightning cable. <BR>Features a custom-tuned microphone capsule for best-in-class audio Connects directly to any iOS device: no adapters required Offers 3 DSP preset modes (vocals, flat, instrument) that automatically optimize EQ, compression and limiting for the sound source <BR>Mounts on any 1/4" standard camera tripod via an integrated thread mount for convenient positioning or use the detachable desktop stand.

The Shure Microflex® MX153 provides outstanding clarity in an extremely comfortable over-the-ear design. This professional subminiature earset microphone is ideal for applications in which improved gain before feedback over lavalier microphones is desired. Delivering exceptional speech clarity, the MX153 is ideal for corporate presentations, houses of worship, A / V conferencing, and live sound reinforcement.

The Microflex Gooseneck microphones bring a whole new meaning to the word flexible. Beyond their fully adjustable goosenecks lies a new level of flexibility the new Microflex interchangeable condenser microphone cartridge. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a broad variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the new Microflex product line for enhanced convenience and consistent sound.

Cardioid Dynamic Instrument Microphone The PGA57 clearly reproduces sound sources in amplified instrument and acoustic drum performance and recording. Available with and without a cable. The PGA57 is a professional quality instrument microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments. Mountable microphone for amplified and acoustic instrument performance and recording, including guitar amps and snare drums Tailored, dynamic cartridge (does not require phantom power) with cardioid polar pattern Includes PGA57, microphone clip, zipper pouch and user guide

Keep the dust, dirt, and grime of the world from invading your mixer. This protective dust cover will keep your Mackie ProFX8 Mixer safe when traveling.

Features electrically isolated XLR I/O, a direct throughput with ground lift, and 2 transformer-isolated outputs. Has a 30dB pad, delivers 48V DC phantom power for microphones, has a ground lift, and has common mode noise rejection up to -100dB at 60Hz. F

Active Combination Stereo RIAA turntable Preamp and Direct Box, PSU Included The Radial J33 is a combination phono preamplifier and purpose built stereo direct box made to handle the rigors of the professional recording studio and the abusive environment of live touring. But don't let the tough exterior fool you… the J33's sonic performance will easily surpass many audiophile preamps costing much more. Designed specifically for dynamic cartridges, the J33 begins with a low noise front end. Inputs are standard RCA with the required turntable ground lug. A precise RIAA low pass filter is tailored to produce a smooth, warm response. The signal is then buffered to provide the audio system with a standard -10dB signal with choice of RCA connectors for compatibility with home HiFi entertainment systems, 3.5mm (1/8") output to feed a laptop or iPod, or a stereo TRS ¼" jack for an audio recorder. A second set of direct box XLR outputs deliver a mic level signal to feed a concert snake, mic splitter and mixing desk preamp inputs. A rumble filter is also available for high sound pressure environments to reduce bothersome resonant feedback. As with all Radial DIs, the J33 features a 14 gauge steel enclosure with a unique book-end design that creates a protective zone around the switches and connectors. The internal I-Beam construction ensures maximum rigidity while ensuring minimal stress on the sensitive solder joints. These combine to provide exceptional shielding against noise while ensuring greater dependability in the most demanding environments. The Radial J33, a high performance turntable preamp that is ideally suited for music playback, archiving, DJing and sampling.

2-channel Instrument Preamp with Boost, 2 Piezo Boosters, 3-band EQ, Notch Filter, High-pass Filter, Separate DIs for House Mix and Monitoring, and Tuner Out with Footswitchable Mute The Radial Tonebone PZ-Pre™ is the most powerful acoustic preamplifier ever to be put inside a pedal. And when we say acoustic, we do not just mean acoustic guitar - we mean ANY acoustic instrument including banjo, violin, cello, mandolin, contrabass, bouzouki or lute. The magic lies in the combination of high performance 100% discrete class-A PZB piezo boosters, an ultra-quiet preamp circuit that will adapt to any pickup system and a host of connectivity options that will put you in total control. The PZ-Pre is equipped with two inputs for quick instrument changes on stage. These can also be combined to blend two pickups together if you so desire. Features include a powerful yet warm sounding semi-parametric EQ to tailor your sound, feedback eliminating controls including a dual-Q notch filter to surgically remove feedback, a high-pass filter to cut low frequency resonance, and a phase reverse switch to eliminate hot spots on stage. It is also equipped with a host of outputs: a ¼" hi-Z instrument out for an on-stage amp, a pre-EQ balanced XLR output for the PA system and a post EQ XLR out for stage wedges or in-ear monitors. A dedicated tuner out with mute switch lets you quietly tune on-stage. There's even a combination power booster - effects loop to add sizzle and dynamics to the performance and extra presence when soloing! Compact and easy to use, the Radial PZ-Pre packs in all of the features you need to take your acoustic instrument from home to studio and club to concert.

Remote + Mic Cable for SE Earphones with MMXC Connection<br>The Shure RMCE is a cable accessory designed to work with Shure SE earphones and any device with a 3.5mm stereo input, such as MP3 players, smartphones, tablets, and more. Its feature set allows you full control over iOS devices, as well as limited push-button control over Android units, though this will vary from device to device.

The SM137-LC is a versatile, flat-response cardioid condenser probe microphone. The SM137 has an ultra-thin diaphragm for a frequency response that combines a smooth high-end with a tight, controlled low-end and a 15db pad for natural sound reproduction in both acoustic and high volume performance applications. Features Ultra-thin diaphragm for smooth high end and tight, controlled low end 15dB pad for performance consistency across a wider range of high SPL sources Low self-noise and transformerless preamplifier circuitry

The SM93 is an economical omnidirectional miniature condenser microphone designed for use in speech applications. Includes SM93, preamplifier, windscreen, tie clip assembly, dual tie clip assembly, mounting bracket, zipper bag, and user guide.

SRH1440 Professional Open Back Headphones provide full-range audio with detailed highs and rich bass in a sleek, attractive design. Made for mastering and critical listening, the premium padded headband with steel frame offers hours of listening comfort. The included storage case, replacement set of velour ear pads, replacement cable, and threaded adapter ensure years of uninterrupted listening enjoyment.

The SRH240A Headphones from Shure provide excellent sound reproduction and comfort. With 40 mm neodymium dynamic drivers optimized for general listening and monitoring, the SRH240A Headphones reproduce deep bass with clear mids and highs. Impedance, power handling and sensitivity are all calibrated for connection to most consumer and professional audio devices. Includes threaded 1/4" (6.3 mm) nickel-plated adapter. NEW: Re-engineered headband & earcup construction provide a more ergonomic, comfortable fit. Features Wide frequency range delivers full bass and detailed highs Optimized performance for use with most pro and consumer audio devices NEW: Re-engineered headband & earcup construction for more ergonomic, comfortable fit Closed-back, circumaural design rests comfortably over the ears and reduces background noise Legendary Shure quality to withstand the rigors of everyday use

Canvas Speaker Bag for Mackie SRM150 Portable Loudspeaker, with Zippered Openings, Accessory Pouch, and Extra-wide Shoulder Strap The Mackie SRM150 Speaker Bag lets you carry your loudspeaker conveniently and safely. The black canvas SRM150 Speaker Bag is made to fit the SRM150 portable loudspeaker and includes an extra-wide shoulder strap for comfortable transport. This durable, lightweight bag also features a large zippered compartment so you can stow all your PA accessories. Mackie's SRM150 active speaker is designed to provide big sound from a compact package.

Limited Edition Super 55 in a modern pitch black finish features the vintage design of the original iconic vocal microphone with a frequency response tailored for natural-sounding vocals and speech.

The Shure VP89M Modular Shotgun Microphone features an interchangeable capsule that displays high RF (Radio Frequency) rejection, superior side noise rejection, and is paired with the detachable VP89 Preamp. Long, short and medium sized capsule barrels are available to suite various recording needs, rejection angles and frequency response types.<br> This model ships with the medium capsule, and includes a windscreen and zippered pouch. The state-of-the-art low noise preamplifier design features a low frequency roll-off switch for eliminating noise below 200Hz. The usefulness of the microphone can be further extended by buying one of the other length capsule and simply attaching it to the already included preamp.<br> <br>-State-of-the-art preamplifier redesign <br>-Superior RF immunity <br>-Internal low-frequency roll-off <br>-Recessed low-cut filter switch for additional control <br>-Smaller footprint <br>-Superior Shure design and rugged, roadworthy construction

The WBH54 (wireless version of the Beta 54) is a subminiature, electret condenser head worn microphone. It provides uncompromised sound quality and reliability with minimal visibility in applications such as broadcast, theater, and touring. Despite their small size, the condenser element delivers full, clear, and natural reproduction of speech and vocals. The microphone features a durable, low-profile wire frame headband which is fully adjustable for stability and comfort. A plastic carrying case protects the microphone.

Series Subminiature Lavalier Microphones<br> Wireless micro-miniature lavalier mic provides full, clear sound.<br> Model WL93 Microphones are economical omnidirectional, subminiature, lavalier, condenser microphones designed for general speech applications where a visually unobtrusive microphone is desirable.<br> All WL93 models are supplied with a mounting block with attached tie bar, a sew-on mounting bracket, and an acoustic windscreen to minimize wind noise in outdoor applications.<br> All WL93 models include a cable terminated with a 4-pin mini connector which connects directly to a Shure wireless body-pack transmitter.<br><br> Features<br> <br>-Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement <br>-Small, inconspicuous mounting hardware <br>-Full, clear sound comparable to larger microphones <br>-Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation <br>-Controlled low-frequency rolloff reduces low-frequency clothing and room noise <br>-Low distortion, wide dynamic range <br>-Uniform omnidirectional polar pattern <br>-Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband <br>-Wide-range phantom powering (SM93) accepts all commonly used voltages

SKB’s Universal Mixer/Equipment Bags are the perfect solution for protecting and transporting your gear from one gig to another with sizes to accommodate the most popular mixers, drum machines, recording interfaces, midi controllers, light panels and other equipment. The 1SKB-UB0909 Mixer Bag interior measures 9” x 9” x 2.75” and will accommodate smaller equipment like the, Behringer Xenyx 802, Mackie 402-VLZ3, Boss DR-3, Focusrite Scarlett 8i6, Roland R-44, TASCAM DR-680, and Avid Mbox Mini Ultra Compact to name a few. The Universal Mixer/Equipment Bag is constructed of a durable 600 Denier padded exterior with heavy-duty dual zippers, an adjustable, padded shoulder strap and double stitched carrying handle for added convenience. The bag includes a convenient, double zippered padded exterior accessory compartment that is large enough to keep your iPad protected while stowing cables or additional gear.

SKB’s Universal Mixer/Equipment Bags are the perfect solution for protecting and transporting your gear from one gig to another with sizes to accommodate the most popular mixers, drum machines, recording interfaces, midi controllers, light panels and other equipment. The 1SKB-UB1212 Universal Bag interior measures 12” x 12” x 4” and will accommodate various gear such as the Behringer Xenyx 1002B, Mackie 1202VLZ, Akai MPD26, and YamahaMG822CX.

SKB’s Universal Mixer/Equipment Bags are the perfect solution for protecting and transporting your gear from one gig to another with sizes to accommodate the most popular mixers, drum machines, recording interfaces, midi controllers, light panels and other equipment. The 1SKB-UB1515 Universal Bag measures 15” x 15” x 5” inside and will accommodate mixers like the Peavey PV10, Allen & Heath Xone DB4, and Mackie DL 1608 with the iPad in the padded pocket.

Vocal microphone provides excellent speech reproduction onstage due to its cardioid pickup pattern. It features a wind and "pop" filter for vocals, a wire-mesh front grille, dual-impedance operation, and a silent magnetic on and off switch.

Red foam windscreen for larger Shure "ball-type" microphones, such as the SM48, SM58®, Beta 58A®, or 565SD.

Universal Microphone Mount Universal Microphone Mount. Quick-release microphone mounting accessory for versatile and secure placement and removal. Included with BETA 98AMP.

Shock mount for SM89 shotgun microphone, or any microphone with a 3/4-inch diameter handle.

Vocal Microphone <br>A high-output vocal microphone, the BETA 58A-X® features a shaped frequency response ideal for close-up vocals. <br>Handheld microphone for professional live vocals and project studio recording Dynamic cartridge with supercardioid polar pattern Available in wireless versions Includes BETA 58A-X, microphone clip, thread adapter, storage bag, and user guide<br> <br>The Beta 58A-X maintains a true supercardioid pattern throughout its frequency range. The Beta 58A-X has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.<br> <br>Features<br> <br>Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect <br>Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound <br>Neodymium magnet for high signal–to–noise output <br>Hardened steel mesh grille that resists wear and abuse <br>Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration <br>Minimally effected by varying load impedance <br>Legendary Shure quality and reliability

The Shure BLX288UK/SM58 offers professional vocal reproduction alongside rock solid wireless connectivity allowing the freedom of the entire stage. The BLX288UK/SM58 provides the ideal solution when looking for vocal clarity in any situation when two handheld wireless microphones are required at the same time.<br> World renowned SM58 capsules ensure the precise and accurate capture of vocals, with a warm and rich tone. The BLX2/SM58 transmitters are lightweight with rugged construction which stands up to the rigors of live performance.<br> The BLX88 receiver receives both handsets and has been designed for a quick setup, with user friendly intuitive controls making operation easy. Separate audio outputs are provided for each channel with individual control. Microprocessor controlled internal antenna diversity provides rock solid and dependable communication to the transmitters whilst the 'One touch-QuickScan' frequency selection system quickly locates the best open frequencies to battle any potential interference.<br> For a dual wireless system you can depend on for outstanding vocal tone and stage ready reliability, the Shure BLX288UK/SM58 is the perfect choice.<br> The system includes: 1 x BLX88 dual channel receiver, 2 x BLX2/SM58 handheld transmitters, 2 x microphone clips and a power supply.<br>

Hi-Flex 50 foot (15 m) cable with chrome XLR connectors, for low-impedance operation.

Overhead Condenser Microphones Integrated wire aiming hanger provides optimal placement above choirs and other ensembles. Available in black Centraverse™ Overhead Condenser Microphones offer low-profile, discreet placement with minimum visibility in a variety of settings. An integrated wire aiming hanger allows for optimal placement above choirs and other ensembles. Snap-fit windscreen also included with each microphone. Featuring Commshield® Technology, which guards against unwanted RF interference from portable wireless devices, Centraverse microphones deliver in best-in-class performance and reliability. Features Tailored frequency response ideal for capturing fast transients above choirs and other ensembles CommShield® Technology that guards against unwanted RF interference from portable wireless devices (smartphones, etc.) and high resistance to intense nearby radio signals Superior Shure design and rugged, dependable construction

The DMK72-52 is a professional 4-piece drum microphone set. It includes three SM57 instrument microphones ideal for Toms and Snare drums and a Beta 52A kick drum microphone. Mounting hardware and a durable carrying case are included.<BR> <BR>Features<BR> <BR>SM57:The industry standard for snare, and a reliable, high-performing choice for toms, the Shure SM57 features a contoured frequency response that cuts through the mix with exceptional impact, while reproducing sound accurately.<BR> <BR>BETA 52A®:Perfect for the kick drum, this mic derives low-end punch and sonic presence from a carefully tailored frequency response. Equipped with its own pneumatic shock mount, the BETA 52A is designed with an integral locking stand mount for easy set up.<BR> <BR>A56D: This universal drum mount system can be used to position mics virtually anywhere -- drum rims, mic stands, even cymbal stands. Designed with captive parts to prevent the loss of individual pieces, the A56D is small, secure, and can be used with any standard mic.<BR> <BR>Carrying case included.

Replacement ear cushions for SRH840 Professional Monitoring Headphones.

The KSM9 is a premium vocal condenser microphone that captures vocal subtlety with extraordinary detail to deliver clear articulation, functional flexibility, and precise vocal reproduction for live performance.<br> Engineered to exacting standards, the KSM9 reveals nuance and subtlety in a microphone optimized for the most demanding live environments. With its dual diaphragm design and switchable polar patterns (supercardioid/cardioid), the KSM9 is the choice for the world's most accomplished vocal performances.<br> KSM9 microphones offer exceptional consistency across all frequencies, providing more gain before feedback, while decreasing proximity effect. As the premier choice in handheld wireless microphone options for Axient®, UHF-R®, and ULX-D®, KSM9 microphones are built to exacting Shure endurance standards, renowned worldwide and proven night after night, center stage.<br> <br>-Exceptional consistency across all frequencies, providing more gain before feedback, while decreasing proximity effect <br>-Dual gold layered, low-mass Mylar® diaphragm design <br>-Switchable polar patterns (supercardioid and cardioid) <br>-Advanced suspension shock mount <br>-Premium electronic components including Class A transformerless preamplifier circuitry <br>-Gold-plated internal and external connectors, including XLR Output Durable aluminum housing <br>-Available as wireless handheld transmitter SKUs <br>-Zippered carrying case

The Mackie Control Extender Pro is a control surface extender that expands your Mackie Control Universal Pro unit with the addition of eight motorized, touch-sensitive Alps faders, plus V-Pot rotary encoders and push-buttons on every channel strip. The Mackie Control Extender Pro module attaches seamlessly to the Control Universal Pro unit, integrating with all the main control surface's functions and commands without the need for any external hardware. You can expand your MCU's ability to control your DAW even further with the addition of the Mackie Control Extender Pro.Mackie Control Extender Pro Control Surface Extension Module at a Glance: Smooth fader controlMulti-function knobs and buttons on each channel strip Seamless integration with MCU Pro.Smooth fader control The Mackie Control Extender Pro features the same 100mm touch-sensitive Alps motorized faders as the MCU Pro control surface. These smooth faders give you the tactile, responsive feel of an analog console while accurately commanding your state-of-the-art DAW software. Multi-function rotary encoders and buttons Each of the Mackie Control Extender Pro's eight channels features a multi-function V-Pot for fast and accurate control of panning, effects levels, and more. Also included on each channel strip are mute, solo, pan, send level, and record arm functions, as well as a full meter display. Seamless integration with the MCU Pro The Mackie Control Extender Pro is literally the "right hand man" of the Mackie Control Universal Pro control surface. Once connected, it's seamlessly integrated into the system, so all parameters, automation, and other control commands are communicated in concert with the rest of the system - no external hardware required!

The Onyx 820i from Mackie is an 8-channel audio mixer with a built-in FireWire computer audio interface. It features a meticulously designed audio mixer section with flexible capabilities for both the studio and the stage. You can tap into the power of computer recording in new ways with its deep DAW integration. The fact that the 820i is fully compatible with Pro Tools M-Powered 8 software really makes it a full-featured audio tool that can adapt to any situation.<br><br> Each of the 3 mic channels on the 820i features a 3-band Perkins EQ with a sweep and a boutique-quality Onyx mic preamp, and the 2 stereo channels all feature 3-band EQ. There are 2 aux sends for monitor mixes on stage, headphone cue mixes in the studio, and for effect sends. Every one of these channels (including the aux sends and the master) can be routed through the FireWire interface into the DAW of your choice. You can even return 2 channels from your DAW back into the 820i and integrate them into your mix.<br><br> For a device that easily fits in a backpack and doesn't take up very much room on a desk, the 820i packs a lot of power into a small footprint.There are some interesting capabilities in the computer integration aspect of the 820i. If you have any good sounding effects that you use with your DAW software, you can easily integrate them into your mixes. <br><br>For live sound, you can have your computer connected and route an aux send to your DAW, apply the effect in your software, and route the wet signal back into the mixer. You can record individual tracks in your DAW, and record the master mix outputs separately.<br><br>The first two channels on the Onyx 820i feature a button that transforms the input into an instrument-level DI. This is ideal for recording guitars and basses. It includes a full-featured talkback section with a built-in microphone that enables you to communicate with artists from the control room of your studio, or through monitors with musicians on stage.

P3TR112GR Wireless Personal Monitor System Set include: P3R Wireless Bodypack Receiver & P3T PSM®300 Wireless Transmitter & SE112 Sound Isolating Earphones

Side-Address Cardioid Condenser Microphone<br> The PGA181’s smooth frequency response and versatile design make it ideal for instrument and vocal recording. Available with and without a cable.<br> Side-address microphone for amplified and acoustic instrument and vocal recording Condenser cartridge (requires phantom power) with cardioid polar pattern Discrete form factor for easy placement in a variety of applications Includes PGA181, microphone clip, zipper pouch and user guide<br> The PGA181 is a professional quality instrument microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments.

Cardioid Condenser Instrument Microphone The PGA98H is optimized for woodwind and brass performance and recording. Available with and without a cable. Wireless version also available. Flexible gooseneck microphone with integrated preamplifier for wind instrument performance and recording Condenser cartridge (requires phantom power) with cardioid polar pattern Integrated horn clamp for quick and easy mounting Includes PGA98H (XLR wired or TQG wireless), zipper pouch and user guide The PGA98H is a professional quality wind instrument microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments.

The ProFX12v2 is the perfect choice for smaller performing acts, solo performers or for small venues that don't have the budget or space for a ton of outboard gear. The ProFX12 has everything needed to make your gig sound great and is really easy to operate. Plus, USB I/O lets you record the show or stream music straight from a laptop.<br><br> The "Pro" in ProFX stands for Pro. Professional tools, rugged build quality, small footprint…everything you need. The ProFX12 is loaded with six Mackie high-headroom, low-noise mic preamps, 3-band EQ, a built-in DI for direct connection of a guitar or bass, integrated "Gig-Ready" effects, precision 7-band GEQ and more.<br><br> The ProFX12 has all the right tools, each and every one designed to sound great. Plus, everything is housed in an ultra-tough enclosure with additional impact-resistant sidecheeks, protecting your investment from the rigors of the road. The all-new RMFX (Running Man FX) 32-bit effects processor brings "Gig Ready," useable effects to your mixes. Why scroll through hundreds of bizarre effects, like "ghost ambience?" Yeah, like anyone even knows what that means. Or how about winners like "delay+phaser2", which you'll never use in a million years. <br><br>Those other mixers will leave your fingers raw from all the scrolling you have to do. The RMFX processor features 16 solid FX that are known for their utility and usability. Small, medium and large room reverbs with a mix of warm and bright characteristics puts your mix in the right space. Simple, rich choruses and an array of practical delays enable you to create professional mixes without requiring a two-hour sound check. Basically, we've delivered the choicest parts of a full rack of gear, right at your fingertips, that is easy to master, allowing you to look and sound really good at your next gig.

The Mackie ProFX16 Mixer Bag lets you carry your mixer conveniently and safely. The black canvas ProFX16 Mixer Bag is made to fit the ProFX16 mixer and includes an extra-wide, padded shoulder strap for comfortable transport. This durable, lightweight bag also features a large exterior pocket, so you can stow accessories.

The J-Iso employs a premium Jensen transformer for optimal signal transfer to minimize distortion and artefact. Full bandwidth performance makes the J-Iso ideal for music production. The passive design begins with 100% discrete components throughout. A set & forget level control lets you attenuate the input signal to prevent it from overloading the destination device. Output connections include a stereo pair of ¼" connectors, a set of RCAs and a mini 3.5mm (1/8") for interfacing to a mini recorder or lap-top computer. Transformer isolation helps eliminate hum and buzz caused by ground loops while eliminating stray DC currents from flowing. Construction begins with 14 gauge steel throughout utilizing Radial's unique bookend construction. This creates a protective zone around the connectors and controls for added durability. The steel construction also assists by shielding the transformers from outside magnetic fields. Inside, the J-Iso features an innovative I-beam skeletal insert that makes it virtually impossible to torque the PC board. This reduces potential stress which could cause premature solder joint failure. Designed for full range applications, the J-Iso combines exceptional signal handling with the type of durability that has made Radial famous.

Stereo Passive DI with Level Control, Mono Merge, and 1/4", RCA, and 1/8" TRS Input Connectors The Radial Trim-Two is a passive direct box, designed for use with laptop computers and other consumer devices where the user has a requirement for a 'ready access' volume control for quick adjustments on stage. The design begins with a choice of inputs including dual ¼" jacks, left and right RCAs and a stereo 3.5mm input. These are wired in parallel to allow the signal to be split off to feed an alternate signal path such as monitors. Inside, two great sounding Eclipse transformers do the work of isolating and balancing the signal. These 'passive engines' deliver a linear frequency response from 20Hz to 18kHz and are capable of handling up to +15dB signal levels thus providing typical -10dB consumer-level devices with plenty of headroom. An easy access front panel stereo level control makes adjusting the volume a snap. A handy stereo-to-mono switch makes it easy to reduce the output channel count or send the same balanced signal to two destinations at once. Transformers provide galvanic isolation between the source and the destination and are extremely effective at eliminating hum and buzz caused by ground loops. This is augmented with a ground lift switch at the XLR outputs. One merely connects the source to the Trim-Two and then the male XLR outputs to the PA system. As the Trim-Two is completely passive, no power is required. Made in Canada from heavy duty 14 gauge steel, the Trim-Two features Radial's unique book-end design that creates protective zones around the connectors and controls. Inside, the unique I-beam frame protects the sensitive inner workings from potential damage that could torque the PC board and cause solder pointes to prematurely go cold. The steel casing also provides shielding against external magnetic fields.

Transmit module with 4 XLR inputs and 4 mic level (-40 to 0dB) isolated XLR-M outputs, balanced I/O, line-level transformers, uses shielded Cat-5 The Radial Catapult is a modular snake system that drives four analog or AES audio channels over a single shielded Cat 5 cable. The Catapult enables system contractors to take advantage of pre-wired networks to connect one room to another, and allows live sound technicians to take advantage of the low cost of Cat 5 cable for return or cross-stage snakes. The modular Catapult is available in six configurations with a choice of three input and three output modules. Each input module includes four XLR-F inputs, four XLR-M outputs and two Neutrik Ethercon™ outputs. Each output module features an Ethercon input, a throughput and two sets of four XLR-M outputs. Modules can be ordered without transformers for sub-snakes or to transmit AES digital signals; with mic isolation transformers to provide split outputs for FOH, monitors or a recording system; or with line level isolation transformers to eliminate system noise. Ground lift switches are provided at each end of the Ethernet cable connection to help eliminate hum and buzz caused by ground loops.

SE215 Sound Isolating™ Earphones provide award-winning sound in a secure, over–the-ear design for long-lasting comfort and immersive audio. Available in wireless and wired versions with detachable cables in multiple color options.

SE846 Sound Isolating™ feature four high-definition drivers for extended high-end clarity and a groundbreaking low-pass filter for true subwoofer performance.<br>Featuring a customizable frequency response and an innovative, detachable cable system, the SE846 Earphones provide a perfectly tailored listening experience.Four high-definition drivers for extended high-end clarity and a groundbreaking low-pass filter for true subwoofer performance in a convenient and portable package.Groundbreaking low-pass filter provides the previously unattainable deep low-end performance of a true subwoofer—without sacrificing clarity or detail.Adjustable frequency response for customizable sound signatures with removable metal nozzle and changeable nozzle inserts (balanced, warm, and bright options included).Detachable cable system enables multiple connectivity options for long-term device compatibility, upgrades, and ease of maintenance.Sound Isolating design blocks up to 37 dB of outside noise for immersive listening no matter where you are.

The Shure SM58S Cardioid Dynamic Microphone Consistently the first choice of performers around the globe, the SM58S vocal microphone is a genuine world standard and a true audio legend. The Shure SM58S is a unidirectional (cardioid) dynamic vocal microphone designed for professional vocal use in live performance, sound reinforcement, and studio recording. A highly effective, built-in, spherical filter minimizes wind and breath pop noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The SM58S has a tailored vocal response for a sound which is a world standard. Rugged construction, a proven shock mount system, and a steel mesh grille ensure that even with rough handling, the SM58S will perform consistently. Outdoors or indoors, singing or speech the SM58S is the overwhelming choice of professionals worldwide.

The SM63 is designed for use on stage and in broadcast and recording studios. The smooth, wide frequency response is tailored for optimum speech intelligibility, and includes a controlled low-frequency rolloff for reduced pick-up of stand and wind noise. A built-in humbucking coil makes the microphone virtually immune to strong hum fields, such as those produced by studio lighting. Includes SM63 (champagne finish, 14.5 cm handle), swivel adapter, windscreen, carrying bag, and user guide.

Offering sophisticated EQ, crossover, dynamics processing and system protection, the Mackie SP260 2x6 Speaker Processor provides complete system optimization for both passive and powered systems. Five different operating modes cover a wide range of systems. Each input and output is loaded with a huge range of processing including flexible EQ, crossover, delay and limiting solutions. It delivers everything you need to professionally optimize loudspeaker systems of nearly any size. The SP260 utilizes high-end 24-bit AKM AD/DA converters with 120dB dynamic range for class-leading sound quality. With 24 user-definable presets and flexible I/O for simple routing and configuration, the SP260 is an ultra-flexible processor, ideal for a wide range of portable and permanent applications. The Mackie SP260 has two inputs that instantly connect your mix into a whole host of processing and routing capabilities. Your input signal will never be the same. It will be better thanks to the SP260. Each input features a mute switch and variable gain control. Now, you can easily control the whole system regardless of how many boxes you have. Turn these down and the entire system turns down. Easy, right? But, that's just where it starts. The Mackie SP260 features 5-band EQ on both inputs. You can choose between parametric or hi/lo shelving, providing an extremely flexible approach to room tuning that is sure to please any professional engineer. There's even a 600ms delay available on each input. This is great when using multiple Mackie SP260s to drive delay stacks in really big venues. Or, you could go crazy and time align the stage with the main speakers. No one is watching and I am sure it will make all the difference in the world. If you are like us, this is what you would be doing. There are six individual outputs on the Mackie SP260 providing a wide range of possible connections, depending on your system.

Developed by a brand trusted for music history’s greatest moments, the SRH145 Portable Headphones deliver deep, rich bass with full-range audio.<BR> <BR>Features<BR> <BR>Closed-back ear cups provide good external noise isolation <BR>Ultra-lightweight, collapsible design offers convenient storage and on-the-go use <BR>Adjustable, on-ear ear cups and padded headband ensure an ergonomic and secure fit

The SRH1840 Professional Open Back Headphones feature individually matched drivers for unparalleled acoustic performance, including smooth, extended highs and accurate bass. Developed with premium materials and precision engineering, the custom-crafted design is extremely lightweight and durable. Ideal for mastering or critical listening applications.<br> The included storage case, replacement set of velour ear pads, replacement cable, and threaded adapter ensure years of uninterrupted listening enjoyment.<br><br> Features<br> <br>-Individually matched 40 mm neodymium drivers for unparalleled acoustic performance with smooth, extended highs and accurate bass <br>-Open-back, circumaural design for exceptionally natural sound, wide stereo image, and increased depth of field <br>-Lightweight construction featuring aircraft-grade aluminum alloy yoke and stainless steel grilles for enhanced durability <br>-Steel driver frame with vented center pole piece improves linearity and eliminates internal resonance for consistent performance at all listening levels <br>-Ergonomic dual-frame, padded headband is lightweight and fully adjustable for hours of listening comfort <br>-Optimized for connection to external headphone amplification systems <br>-Oxygen-free copper cable with Kevlar™ reinforced jacket for superior performance and durability <br>-Dual-exit cables with gold-plated MMCX connectors provide secure connection and detachability for easy storage or replacement <br>-Replaceable velour ear pads with high-density, slow-recovery foam for exceptional comfort <br>-Individually tested and serialized <br>-Legendary Shure durability to withstand the rigors of everyday use

LensHopper™ Camera-Mount Condenser Microphone<br> The VP83 shotgun microphone works with DSLR cameras and HD camcorders, capturing detailed, high-definition audio with full low-end response.<br><br> The ultra-compact VP83 LensHopper™ is an all-in-one solution for capturing detailed, high-definition audio with full low-end response for professional results every time. For use with DSLR cameras and HD camcorders, the VP83 features a rugged build and true-to-life audio quality, expertly combining form and function. Its easily accessible controls enable quick adjustments for different recording environments.<br><br> Features<br><br <br>-Exceptional Audio Performance with User-Friendly Controls <br>-High sensitivity and low self-noise with wide frequency range for natural audio reproduction <br>Highly directional supercardioid / lobar polar pattern that rejects unwanted off-axis audio while clearly capturing the intended sound source <br>-Superior RF immunity that avoids unwanted audio artifacts from cellular and RF devices <br>-Easily accessible controls at the back of the microphone: <br>-Three-position gain (-10 dB pad, 0, +20 dB boost) to compensate for different recording environments <br>-Low-cut filter to eliminate background noise and room ambience <br>-Durable and Lightweight <br>-Integrated Rycote® Lyre® shock mounting system that provides robust isolation from vibration and mechanical noise (exclusively developed with Rycote for the VP83) <br>-Durable, all-metal construction that meets legendary Shure quality standards in an ultra-lightweight design

the Mackie 3204VLZ4 mixer is one piece of gear you can truly rely on. It continues the VLZ Series' trend for rock-solid construction, while taking your sound quality to a new level. You've got an amazingly wide dynamic range, incredible 60dB gain range on the Onyx microphone preamplifiers, and ultra-low-noise performance. The 3204VLZ4 also boasts effects DSP with two internal FX sends, and even a 4 x 2, 24-bit USB audio interface for easy, high-quality recording. And with high-resolution meters, generous I/O, and sealed rotary controls that keep out dust and grime, the Mackie 3204VLZ4 is one of Mackie's best mixers ever. Mackie 3204VLZ4 32-channel Mixer at a Glance: Premium-quality mixer with proven components Sealed rotary controls ensure long-term reliability Incredible sound quality Built-in 32-bit RMFX+ Effects Easy recording with built-in 24-bit USB audio interface Premium-quality mixer with proven components The Mackie 3204VLZ4 is, first and foremost, a Mackie mixer. It houses 28 of Mackie's premium-quality Onyx mic preamps for natural, transparent sound. Its mic/line channels are equipped with 3-band EQ with sweepable mids. Signal routing is easy and flexible. On top of all that, the Mackie 3204VLZ4 is built Mackie-tough - trust this mixer to perform even in the most harrowing situations. Sealed rotary controls ensure long-term reliability Sure, the Mackie 3204VLZ4 mixer will shrug off bumps, drops, and outright abuse, but what about spills or rain? Thankfully, the 3204VLZ4 boasts sealed rotary controls that resist grime, dust, and anything else that may spill onto your mixer. We're not saying it's fully waterproof, but it's an extra level of protection you'll eventually be very glad you have when you're running live sound in a hectic environment.

The Bose F1 Loudspeaker answers the prayers of many touring acts and live sound engineers by offering the flexibility of a line array in a portable PA with lightweight design and easy setup. Coupled with the famous Bose sound quality that has made their L1 one of our most popular portable PA systems and you've got great sound for clubs, halls or theatres with raked seating. Get the projection just right with 4 selectable coverage patterns and rely on Bose to take care of the rest.

Developed by Shure with Rycote, softie windshield reduces wind noise up to 25 dB. Works with VP89M.

The B2D is easily the smallest directional lavalier in the world, with the next smallest mic being more than twice its size. Combined with exceptional sound quality and isolation, this tiny package opens up a new set of miking options that were previously unavailable. The tight hypercardioid pattern gives the B2D an extra 6-10 dB of headroom compared to an omni lav, meaning less problems with feedback, ambient noise, room rumble, and phase cancellations with multiple mics. The B2D is supplied with: Wireless adapter (if detachable) Carrying case Single isolation clip Windscreen Protective cap

The Beta 181/BI has a bidirectional (figure-8) pickup pattern, making it perfect for advanced mic placement techniques such as Mid-Side stereo, while adding extraordinary off-axis sound rejection to its easy of positioning. What's even better is that, like all Beta 181 models, the Beta 181/BI has a switchable capsule, so you can pick up additional polar patterns to suite your needs. Shure Beta 181/BI Small-diaphragm Side-address Condenser Microphone Features at a Glance: Polar pattern: Bidirectional (figure-8) Sensitivity: -51.0dBV/Pa (2.6 mV) Maximum SPL: 156.0dB SPL (2.5-kohm load), 153.5dB SPL (1-kohm load) Precision-engineered, compact side-address design Easy to position in many configurations and in tight places front-address condensers won't fit Optional interchangeable polar pattern capsules attach to the Beta 181 body for extra flexibility For use in high SPL environments Includes stand adapter, windscreen, and carrying case (carrying case will securely protect up to 4 polar pattern capsules) Weight: 5.1 oz. Requires +48V phantom power The Sure Beta 181 small-diaphragm side-address condenser microphone adds flexibility to any studio

The Shure Beta 54TM is a subminiature electret condenser headset microphone. It provides uncompromising sound quality and reliability with minimal visibility for applications such as broadcast, theater, and touring. Despite its small size, the condenser element delivers full, clear, and natural reproduction of speech and vocals. The Beta 54 microphone features a durable, low-profile wire frame headband that is fully adjustable for stability and comfort. A plastic carrying case protects the microphone and its accessories.

Miniature Cardioid Condenser Microphone<br> Precision-engineered for professional drum and instrument in live and studio applications. Two configurations available. <br>The Shure BETA®98A is a precision-engineered compact, high-output miniature condenser microphone for professional sound reinforcement and studio recording. An extremely uniform cardioid polar pattern provides excellent gain-before-feedback and off-axis rejection of unwanted noise.<br> <br>Both Beta 98A configurations feature high sound pressure level capability (SPL). Beta 98AD/C includes A98D drum mount with flexible gooseneck that makes it an essential, accurate choice for toms, snares, and percussion. Beta 98A/C is recommended for a variety of acoustic or amplified instruments including drums, piano, reed, wind, and strings.<br> <br>Features<br> <br>-Uniform cardioid polar pattern provides maximum gain-before-feedback and rejection of off-axis sound for smooth high-end response and control <br>-Frequency response tailored for drums and percussion applications with a wide dynamic range for use in high SPL environments <br>-Precision-engineered design for unobtrusive microphone footprint <br>-Beta 98A models ship with external in-line preamplifier for discreet cable placement, snap-fit windscreen, and zipper pouch <br>-Beta 98AD/C ships with A98D drum mount featuring a flexible gooseneck for precise placement and secure attachment <br>-Beta 98A/C ships with RK282 shock mount swivel adapter for attachment to any standard microphone stand

The Beta 98AMP/C drum microphone combines an integrated preamplifier with a miniature cardioid condenser capsule to provide a smooth, natural tailored response for drums and percussion. It offers a flexible gooseneck and the A75M universal microphone mount for accurate and secure placement in any configuration.

Instrument Microphone A versatile solution for brass or percussion instruments. No external mounting hardware required. The BETA®98H/C and the wireless version WB98H/C are premium cardioid condenser instrument microphones that clamp onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

The Shure BLX24RUK/SM58 offers professional vocal reproduction alongside rock solid wireless connectivity allowing the freedom of the entire stage. The world renowned SM58 capsule ensures the precise and accurate capture of vocals, with a warm and rich tone. The BLX2/SM58 transmitter features a lightweight design with rugged construction to stand up to the rigors of the stage. The BLX4R receiver has been designed for a quick setup, with user friendly intuitive controls making operation easy. Included is the rack mounting system required to mount the BLX4R into a standard 19U rack space. Microprocessor controlled internal antenna diversity provides rock solid and dependable communication to the transmitter whilst the 'One touch-QuickScan' frequency selection system quickly locates the best open frequency to battle any potential interference. For a wireless system you can depend on for outstanding vocal tone and stage ready reliability, the Shure BLX24RUK/SM58 is the perfect choice. The system includes: BLX4R single-channel receiver, rack mounting kit for BLX4R, BLX2/SM58 handheld transmitter, microphone clip and power supply.

This ClearPac Drum Shield Cleaning Kit is assembled by ClearSonic including ClearView Plastic and Glass Cleaner, a Rainwipes Microfiber Towel, and a pair of one–size–fits–all brown Jersey Gloves.<br><br> ClearView Plastic and Glass Cleaner is safe on all plastics and glass. Anti-static formula helps reduce dust and dirt build-up. Originally designed to clean airplane windshields without fogging, ClearView works great on ClearSonic Panels. One strand of the Rainwipes Microfiber Towel is several hundred times smaller than a fine strand of cotton fiber. The hypo-allergenic, non-abrasive wedge shaped microfiber scoops lifts and traps dirt, dust, grime and moisture without scratching. The fibers are lint free and non-abrasive. Microfiber towels can be used wet or dry and are extremely durable. They can be washed up to 500 times. Avoid fingerprints and extend the life of your ClearSonic Panel with ClearSonic one-size-fits-all brown Jersey Gloves.

Centraverse™ Gooseneck Condenser Microphones are ideal for use in installed sound reinforcement applications, including corporate facilities, houses of worship, and government institutions. Dual-section gooseneck provides full articulation and easy placement options.<br>Each microphone includes a windscreen and mounting flange.Featuring CommShield® Technology, which guards against unwanted RF interference from portable wireless devices, Centraverse microphones deliver in best-in-class performance and reliability.

Digital Mixer with Lightning Connector, 8 x Onyx Preamps, 24-bit Cirrus Logic Digital Converters, DSP Processing, and Support for Up To 10 Wireless iOS Device Connections<br><br> The 8-channel Mackie DL806 brings the power of digital mixing and the freedom of wireless control to more users and applications than ever before. Easy-to-setup wireless mixing allows control from anywhere using up to ten iPad, iPhone or iPod touch devices. The DL806 hardware provides unmatched sonic performance with eight Onyx mic preamps and 24-bit Cirrus Logic AD/DA converters and a host of powerful plug-ins like EQ, dynamics, effects and GEQ. Perfect for a wide variety of smaller applications and venues, the DL806 is the most modern, powerful utility mixer available. Forget bulky consoles and racks of gear. The power is at your fingertips.

This user installable tray insert and allows an iPad 2, 3rd Generation or 4th Generation to be docked for wired control of a Mackie DL Series mixer. Requires DL806 or DL1608 with appropriate connector.

Tilt it. Mount it. Get a better monitoring angle or mount FreePlay on a speaker pole with the kickstand / pole mount accessory. The Kickstand / Pole Mount attaches to the bottom of FreePlay replacing the battery compartment cover. It allows you to either angle it back 45 degrees or set it on top of a standard speaker tripod.

The GLXD16UK wireless instrument system offers the freedom of the entire stage with totally license free operation wherever you are in the world. LINKFREQ 2.4 GHz digital transmission offers incredible audio quality- automatically re-tuning in the event of interference to ensure a seamless and uninterrupted audio signal. This not only reduces the worry of interference, but drastically reduces set up times.<br> <br>With an all-metal construction, two-color transmitter status indicator LED and multiple charging solutions (car, wall or USB) the GLXD16UK is a sophisticated wireless instrument system that makes life easy and ensures your guitar sounds the way it should.<br> <br>Included with the system:<br> <br>-GLXD1 Body Pack Transmitter <br>-GLXD6 Pedal Board Receiver <br>-SB902 Lthium-ion Rechargeable Battery <br>-PS42E Power Supply <br>-SBC-USB-MicroB Cable <br>-WA305 guitar cable

The I2 Instrument Microphone has been engineered from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. The combination of small size and sonic precision makes it ideal for X-Y, M-S, and other techniques that rely on accurate coincident positioning and consistent patterns. Its tiny size makes it perfect for distance miking that is invisible on camera. Flexible new close miking techniques are aided by Countryman's new line of instrument mounts, which are designed to mount securely and gently to many different instruments.

The I2 Instrument Microphone has been engineered from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. The combination of small size and sonic precision makes it ideal for X-Y, M-S, and other techniques that rely on accurate coincident positioning and consistent patterns. Its tiny size makes it perfect for distance miking that is invisible on camera. Flexible new close miking techniques are aided by Countryman's new line of instrument mounts, which are designed to mount securely and gently to many different instruments.

The premium KSE1200 Electrostatic Earphone System is an electrostatic earphone and amplifier system for use in‐line with portable media players. These single‐driver electrostatic Sound Isolating™ earphones provide an astounding level of clarity and detail for the most discerning audio aficionados.<br><br>The KSE1200 Electrostatic Earphone System is a premium Sound Isolating electrostatic earphone system for use in‐line with portable media players. Featuring a pair of single‐driver electrostatic Sound Isolating™ earphones and matched, high voltage amplifier. The input stage of the System is designed for seamless integration with premium audio players common in today’s high quality portable audio market.<br> Providing an unrivaled level clarity and detail, the KSE1200 system brings the award winning performance of Shure’s electrostatic technology into a more compact, efficient, and affordable solution.<br> Both the Shure KSE1500 and KSE1200 systems make portable high fidelity audio a reality.

The gray MV5 from Shure is a portable digital condenser microphone that has a detachable desktop stand. It can be used to capture audio on Mac or Windows computers, iPods, iPhones, iPads, and Android/iOS devices in applications such as music, podcasting, video chats, and more.<BR> <BR>The MV5 microphone features a low-profile design and allows you to monitor in real time via its integrated headphone output jack. It is built with an integrated thread mount that is compatible with any 1/4" standard camera tripod. The following cables are also included: a Micro-B-to USB cable, and a Lightning cable.<BR> <BR>Features<BR> <BR>2-in-1 iOS and USB connectivity offers instant setup at home or on the go <BR>Record, edit, and share recordings from the free ShurePlus MOTIV iOS app <BR>Compatible with all common iOS audio and video apps <BR>Angle-adjustable desktop stand and integrated ¼” thread mount provide flexibility Iconic, low-profile design <BR>Tuned to capture great recordings, built to last <BR>Zero-latency headphone output with mute and volume control <BR>Lightning® and USB cable included <BR>Compatible with iOS, Android**, Mac and PC