SRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.

SRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.

SRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.

*** OPENBX *** Two-Way Passive Loudspeaker with 12" Woofer, 1.75" Compression Driver, and 600-Watt Power Capacity<br><br> The Mackie C300Z is a mid-priced 2-way speaker with a 12" woofer and a 1.75" compression driver housed in a wide-dispersion constant directivity horn, with a 300 Watt average power handling capacity.<br><br> The asymmetrical design and internal damping of the C300Z contribute toward a natural sound reproduction free of phase anomalies, and the rugged enclosure may be pole-mounted, flown, or used as a floor monitor. C series speakers are tuned exclusively by the renowned EAW design team, and offer design concepts applied to elite loudspeaker systems at a fraction of the cost. Portable Passive loudspeaker with 1.75" HF compression driver and 12" LF transducer<br><br> -750W peak power handling <br>-HF compression driver mounted on multi-celled aperture, with constant directivity horn for wide 90° x 45° dispersion angle <br>-Accurate reproduction of upper mid-range and high frequencies, tuned Low <br>-Impedance Compensated Crossover(LICC) for matching driver beamwidth patterns <br>-Asymmetrical monocoque design with no parallel surfaces, causes reflection of mid and high frequency resonances at angles into internal damping materials, minimizes phase anomilies and other signal distortion <br>-Equally viable as floor monitor or mounted/flown PA speaker with natural frequency response and dispersion, free from feedback-causing transient spikes <br>-Dynamic protection for compression driver, 2nd order high-pass filter for over-excursion protection <br>-Inputs and thruputs for parallel connection of up to 2 sets of speakers from single amp channel or powered mixer <br>-Rugged impact-resistant enclosure with sturdy side handles, pole-mount, and integrated rigging points for "flying" the speakers

*** OPENBOX *** The Thump12BST delivers detailed midrange and abundant bass, thanks to Mackie's proprietary Dynamic Bass Response, along with wireless control and Bluetooth streaming. A built-in three-channel digital mixer features a pair of Vita+ preamps with Wide-Z technology, effortlessly handling mic, instrument, and line-level signals. It's easy to get great sound with the Thump12BST — channels one and two supply you with a three-band EQ and variable highpass filters, and six application-specific speaker modes tailor the speaker to your situation. Complete with a durable road-ready enclosure and robust system protection, the Thump12BST is great for small venues, such as coffeehouses.

The ultra-portable Mackie SRM-Flex Portable Column PA System features 1300W of power and a custom wide-dispersion array ensuring plenty of headroom for crystal-clear, room-filling sound. The built-in 6-channel digital mixer offers full control flexibility via physical knobs or wirelessly on your phone via the SRM-Flex Connect™ app on iOS and Android®. You can even stream music or backing tracks via any Bluetooth® enabled device.

150W Active PA Speaker with 3-channel Mixer, 3-band EQ, and 5.25" Driver (each)<br><br>Don't be fooled by its small size. The SRM150 is big on features and sound quality. Featuring a built-in three-channel mixer and Mackie's powerful 3-band EQ giving you full tonal control of the output. The SRM150 can even be mounted on a mic stand, making it the ideal personal monitor.<br><br>BUILT-IN MACKIE MIXER<br>At the very heart of the SRM150 is a Mackie mixer, with all the versatility and features you've come to expect. True 48V phantom power for powering the most finicky of mics and powerful 3-band EQ for shaping your sound the way you want it. You can even send your output to FOH or more speakers with the thru output.<br><br>PLUG IN ANYTHING<br>Channels 1 and 2 can be used for mic/line sources, thanks to the handy combo jack, which accepts either ¼" TRS or XLR connections. Channel 1 also has an instrument switch giving you all the benefits of a DI box built right in. There is even RCA inputs so you can connect a smartphone, etc.<br><br>UNMATCHED SOUND QUALITY<br>We’ve matched the SRM150's powerful 150W Class-D amplifier with an equally impressive 5.25" full range, weather-resistant neodymium driver. The SRM150 puts out a blistering 120dB SPL @ 1 meter, far more than the competition offers.<br><br>"BUILT-LIKE-A-TANK"<br>The legendary SRM series is known for its unmatched sound quality and road-worthy design and the SRM150 continues that with premium components and a rugged molded cabinet designed to take years of abuse.

Take great sound with you wherever your music takes you with the Mackie FreePlay LIVE. Hook up a vocal mic and your acoustic-electric guitar, stream backing tracks from your smartphone via Bluetooth, and you're ready to perform with up to 15 hours of operation from the FreePlay LIVE's built-in rechargeable lithium-ion battery. A precision-tuned ported enclosure delivers enhanced bass and headroom that you can hear and feel. You also get onboard effects for adding the final polish to your sound. Beyond that, you can expand your system by linking the FreePlay LIVE to a second FreePlay-series speaker. The FreePlay LIVE is a powerful, convenient and flexible portable PA system.<br><br>You'll be heard with the FreePlay LIVE. Its 6" low-frequency driver and dual high-frequency drivers deliver full-range sound, driven by an impressive 150 watts. Whether you're listening to music on the beach or busking on the boardwalk, you'll sound great with the FreePlay LIVE.<br><br>With your smartphone and the Mackie FreePlay LIVE, you're ready for wireless music streaming. Just connect via Bluetooth and you're done, ready to stream backing tracks for live performance or just to have some fun.<br><br>Download the FreePlay Connect app to your smart device for wireless control over the FreePlay LIVE's functions. You can adjust input levels, change effects, and other hardware functions. At Sweetwater, we appreciate this convenient way of controlling the FreePlay LIVE.

The Mackie FreePlay HOME is a portable Bluetooth speaker featuring powerful, immersive sound tuned by professional engineers, which results in a compact, yet powerful speaker system with clarity and high headroom. Using premium components, the design creates a natural, room-filling sound that results in an accurate reproduction of your music.<br><br>The FreePlay HOME utilizes a 60W amplifier to power the two 2.5" full-range drivers which provide a frequency response of 70 Hz to 20 kHz. A pair of passive radiators further enhance the bass and headroom for a bigger, richer sound. Simply connect a sound source via wireless Bluetooth or the 3.5mm auxiliary input and enjoy your music anywhere. The built-in rechargeable lithium-ion battery provides up to 15 hours of continuous use, while a dedicated USB port keeps your portable device charged. The on-board DSP provides system limiting to protect your portable speaker, while the FreePlay Connect app for iOS and Android offers additional features and functions. Link to a second FreePlay speaker for even bigger, clearer stereo sound or split them up for an immersive multi-room music listening experience. The Mackie FreePlay HOME ships with a power cord.

The Mackie FreePlay GO is a portable Bluetooth speaker featuring powerful, immersive sound tuned by professional engineers, which results in a compact, yet powerful speaker system with clarity and high headroom. Using premium components, the design creates a natural, room-filling sound that results in an accurate reproduction of your music.<br><br>The FreePlay GO utilizes a 40W amplifier to power the two 2.0" full-range drivers which provide a frequency response of 85 Hz to 20 kHz. A pair of passive radiators further enhance the bass and headroom for a bigger, richer sound. Simply connect a sound source via wireless Bluetooth or the 3.5mm auxiliary input and enjoy your music anywhere. The built-in rechargeable lithium-ion battery provides up to 15 hours of continuous use, while a dedicated USB port keeps your portable device charged. The on-board DSP provides system limiting to protect your portable speaker, while the FreePlay Connect app for iOS and Android offers additional features and functions. Link to a second FreePlay speaker for even bigger, clearer stereo sound or split them up for an immersive multi-room music listening experience. The Mackie FreePlay GO ships with a power cord.

Canvas Speaker Bag for Mackie SRM150 Portable Loudspeaker, with Zippered Openings, Accessory Pouch, and Extra-wide Shoulder Strap The Mackie SRM150 Speaker Bag lets you carry your loudspeaker conveniently and safely. The black canvas SRM150 Speaker Bag is made to fit the SRM150 portable loudspeaker and includes an extra-wide shoulder strap for comfortable transport. This durable, lightweight bag also features a large zippered compartment so you can stow all your PA accessories. Mackie's SRM150 active speaker is designed to provide big sound from a compact package.

2-way Passive Speaker with 200W Capacity, 10" Woofer, and 1.4" Titanium Dome Tweeter<br><br>The passive Mackie C200 speaker contains a 10" high-efficiency woofer and 2" voice coil that deliver a wide 59Hz-22kHz frequency range. The C200 speaker's 1-2/5" compression driver is mounted on a waveguide that creates a wide 90° x 80° dispersion. The Mackie C200 has a 500W peak handling at 8 ohms.<br><br>The Mackie C200 speaker is also flyable, tiltable, and pole-mountable. The C200 delivers optimum performance in portable PA, stage monitor, and permanent/flown applications. The Mackie speaker's rugged, injection-molded composite cabinet makes it a solid performer on the road, and its unique shape prevents unwanted vibrations and standing waves from forming inside the speaker cab, while making it perfect as a side, tilt-back stage monitor. Other features include precision transducer components, unique Low-Impedance Compensated Crossover design, and wide dispersion to assure every audience member has a great seat.<br><br>Precision Tuned by the Speaker Brains at EAW Mackie's C Series passive loudspeakers represent Mackie's first lightweight passive speakers tuned exclusively by the EAW loudspeaker engineering team-a team with more than 25 years of high-output loudspeaker expertise, having created loudspeaker systems for critical applications as diverse as the Super Bowl, Iron Maiden, and the Pope. Although loudspeakers for these mega-systems cost exponentially more than the stalwart C200, many of the same concepts have been applied, namely: designing custom 10" LF drivers with a frequency range from 59Hz-3000Hz and a 2" voice coil that can take a pounding. It also has a 1.4" high-frequency titanium driver and horn providing a wide, controlled dispersion pattern, and precise reproduction of the critical 1000Hz-20,000Hz upper mid-range and high frequencies.<br><br>

Two-Way Passive Loudspeaker with 12" Woofer, 1.75" Compression Driver, and 600-Watt Power Capacity<br><br> The Mackie C300Z is a mid-priced 2-way speaker with a 12" woofer and a 1.75" compression driver housed in a wide-dispersion constant directivity horn, with a 300 Watt average power handling capacity.<br><br> The asymmetrical design and internal damping of the C300Z contribute toward a natural sound reproduction free of phase anomalies, and the rugged enclosure may be pole-mounted, flown, or used as a floor monitor. C series speakers are tuned exclusively by the renowned EAW design team, and offer design concepts applied to elite loudspeaker systems at a fraction of the cost. Portable Passive loudspeaker with 1.75" HF compression driver and 12" LF transducer<br><br> -750W peak power handling <br>-HF compression driver mounted on multi-celled aperture, with constant directivity horn for wide 90° x 45° dispersion angle <br>-Accurate reproduction of upper mid-range and high frequencies, tuned Low <br>-Impedance Compensated Crossover(LICC) for matching driver beamwidth patterns <br>-Asymmetrical monocoque design with no parallel surfaces, causes reflection of mid and high frequency resonances at angles into internal damping materials, minimizes phase anomilies and other signal distortion <br>-Equally viable as floor monitor or mounted/flown PA speaker with natural frequency response and dispersion, free from feedback-causing transient spikes <br>-Dynamic protection for compression driver, 2nd order high-pass filter for over-excursion protection <br>-Inputs and thruputs for parallel connection of up to 2 sets of speakers from single amp channel or powered mixer <br>-Rugged impact-resistant enclosure with sturdy side handles, pole-mount, and integrated rigging points for "flying" the speakers

The Bose F1 Loudspeaker answers the prayers of many touring acts and live sound engineers by offering the flexibility of a line array in a portable PA with lightweight design and easy setup. Coupled with the famous Bose sound quality that has made their L1 one of our most popular portable PA systems and you've got great sound for clubs, halls or theatres with raked seating. Get the projection just right with 4 selectable coverage patterns and rely on Bose to take care of the rest.

The first powered portable loudspeaker that lets you control its vertical coverage pattern. So whether you’re playing at floor level, on a stage or facing raked seats or bleachers, you can adapt your PA to the room.<br><br> How it works:<br> The eight drivers on the F1 Model 812 Flexible Array loudspeaker are mounted on a specially designed flexible baffle. Simply push or pull the array into position to create four vertical coverage patterns: “Straight,” ”J,” “Reverse J,” or “C.” Once set, the system automatically changes the EQ to maintain optimum tonal balance for each unique coverage pattern.<br><br> Bose® Professional has drawn near-universal acclaim from end users and venue owners for its iconic L1® portable array systems, and we are now expanding our portable P.A. offerings with the introduction of the F1 Model 812 Flexible Array Loudspeaker and F1 Subwoofer. Designed to serve an even broader set of applications than L1 systems, F1 Model 812 is the first powered portable loudspeaker that lets users optimise sound by creating up to four different vertical coverage patterns. Offering exceptional power and clarity, the F1 system provides versatility for a wide range of applications and venues, easy setup, aesthetically pleasing design, and rugged durability.<br><br> Designed for live music, DJ and general PA applications, the F1 System is ideal for: <br><br> Full Band<br> Schools<br> Foreground Business Music Systems<br> Corporate AV<br> Houses of Worship<br> Mobile DJ’s<br> Rental<br> Raked Seating in Auditoriums<br><br> Features:<br> High performance compact subwoofer: All the performance of a larger bass box in a more compact design that’s lighter and easier to carry than conventional subwoofers<br> High-excursion 10-inch drivers: 2 woofers provide deep impactful bass Integrated mounting stand: Built-in stand is stored in the rear of the subwoofer making set up fast and easy—includes cable channels to neatly hide wires Line output EQ.

Fully loaded and weighing in at just 15 pounds, the Bose S1 Pro is the ultimate all-in-one PA for soloists, event speakers, and smaller acts. Whether you tilt it, seat it, or mount it, the S1 Pro delivers rich, even coverage to an entire room, with Auto EQ to eliminate hotspots out on the floor. Two channels with independent EQ, reverb, and ToneMatch technology promise flattering reproduction of voices and instruments, while a dedicated third channel with 1/8" aux input and one-touch Bluetooth pairing and streaming handles music playback. A convenient carry handle facilitates speedy load-ins and setups, while a factory-installed Li-ion battery gives you unmatched PA portability.<br>Bose sound reinforcement are known for their wide, even coverage, and the S1 Pro is no exception. Sound is dispersed not just through the front of the enclosure, but the sides as well, for room-filling sound from a single unit. The Auto EQ feature keeps sound consistent as listeners move about a room.

F1 Model 812 Flex Array Loudspeaker For F1 Subwoofer <br> F1 Subwoofer Powered Speaker<br>

L1 PS15 Powerstand With Carrying Bag<br> L1S Line Array 12 Speakers With Carrying Bag<br> B1 Bass Module for L1 Systems<br>

L1 Compact Power Stand Built-in Mixer Includes Carrying Bag<br> L1 Compact Extensions With Carrying Bag<br>

L1 Model II Power Stand With Carrying Bag<br> L1 Model II Cylindrical Radiator Loud 24 Speaker Top & Bottom<br> B2 Bass Module for L1 Systems<br>

The Audio Commander is an all-in-one compact PA system designed to satisfy the needs of customers such as professional DJs, aerobics instructors, presenters or anyone needing a self-contained, self-powered unit without cables. The Audio Commander can operate on its internal rechargeable battery or AC power. Two UHF wireless microphones are included, along with the capability to play audio from Bluetooth®-enabled devices, USB, and SD media. There are also two XLR/TRS combo jacks to facilitate MIC/LINE inputs. All of these features are packaged in a smartly-designed unit with luggage handle and wheels for easy transport and quick set-up. A water-resistant cover is included for storage, transport and protection from the elements.

The Black Canvas Bag from Mackie is designed to fit the Thump12A & Thump12BST speakers.

DRM Series Professional Powered Loudspeakers feature class-leading power, Advanced Impulse™ DSP for unmatched clarity, and the DRM Control Dashboard™ with full-color display for easy control.<br><br>DRM Series Professional Powered Loudspeakers represent decades of innovation in acoustic, DSP, and amplifier design. Combining extensive tuning, premium components, and cutting-edge DSP – DRM Series Loudspeakers deliver the power, clarity, and ease of use you’ve been dreaming of in a system that won’t cost a fortune.<br><br> The DRM Series is perfect for mobile DJs, bands, clubs, houses of worship, production/install, and more. Available in multiple point source configurations, line array, plus companion powered subwoofer.

DRM Series Professional Powered Loudspeakers feature class-leading power, Advanced Impulse™ DSP for unmatched clarity, and the DRM Control Dashboard™ with full-color display for easy control.<br><br>DRM Series Professional Powered Loudspeakers represent decades of innovation in acoustic, DSP, and amplifier design. Combining extensive tuning, premium components, and cutting-edge DSP – DRM Series Loudspeakers deliver the power, clarity, and ease of use you’ve been dreaming of in a system that won’t cost a fortune.<br.<br> The DRM Series is perfect for mobile DJs, bands, clubs, houses of worship, production/install, and more. Available in multiple point source configurations, line array, plus companion powered subwoofer.

Mackie SRM 1600W High-Definition Powered Loudspeakers deliver on Mackie’s “Built-Like-A-Tank” SRM legacy in professional-grade all-wood designs with the output, clarity and simplicity you demand. Five powerful boxes provide the right sound for any application. When you want thumping bass, the powerful Mackie SRM1850 powered subwoofer gives you much more than you'd expect from its compact size. The SRM1850 delivers 1,600 watts of huge-sounding bass through a custom-designed 18" woofer. It's easy to dial in great sound on the fly because the SRM1850 has presets specifically for use with Mackie SRM series loudspeakers. But with a variable digital crossover, it's easy to match with virtually any system too. For a powerful and portable bass reinforcement solution, the Mackie SRM1850 powered subwoofer will exceed your expectations

Mackie's gone the extra mile for you with the SRM350v3 active speaker. The newest generation of SRM speakers gives you 1000 watts packed into Mackie's rugged, lightweight molded enclosure along with powerful digital audio processing to match. An on-board mixer, one-button tone shaping, feedback elimination, and thru-put signal routing options makes the SRM350v3 the most powerful component of your rig but stays convenient and easy-to-use. Lighten your load-in, update your PA, and let the speaker do some of the work, add a Mackie SRM350v3 active speaker to your rig!<br><br>Having an active speaker or two on hand is always a good idea for a gigging musician and they don't get much more versatile than the SRM350v3. You're always coffeehouse-gig ready with an on-board mixer that has two channels of Mackie's Wide-Z preamps to handle your mics and instruments and RCA inputs for tracks or music between sets. If you're called to play a Saturday with the band at the local pub (or for rehearsal), you won't have to worry about walking into a bad monitoring situation. Do what Sweetwater players do and take your SRM305v3, its perfectly designed 'monitor-wedge' cabinet and one-button monitor mode audio processing have you covered.<br><br>The SRM350v3 does all the work that your old front of house rack took care of. The one-button High-Definition Audio Processing mode selection applies processing that makes the speaker bump for DJs or boosts vocals for your solo gigs. The automatic Feedback Destroyer keeps the squeals out of your show and you don't have to chase EQ settings all night. Mackie's proprietary Smart Protect DSP keeps your speaker safe and reels you back in if you get pushy with the master fader.<br><br>With all the awesome there is to the SRM350v3, you almost forget that it's a great-sounding speaker too! The precision 2-way crossover feeds a 10" neodymium woofer and a 1.4" titanium dome compression driver giving you exceptional clarity and performance

he Mackie Thump 15A / 15BST Speaker Bag is designed to preserve and protect your loudspeaker from the rigors of on-the-road wear and tear. The outer material is made from 600D polyester fabric with a water-resistant polyurethane coating. Internally, the case uses polyethylene boards on the bottom and sides to provide a stiff, protective structure. The interior also features a layer of foam covered by knitted fabric to provide cushioning from knocks and bumps with protection for the speaker's finish. Other notable features include an outside cable pouch with a hook-and-loop fastener, heavy duty zippers, and comfortable padded webbing on the handles, located on the side of the bag.

1000W Biamplified Live Speaker with 12" LF Driver, 1.4 Titanium Dome Compression Driver, 2-channel Mixer, and On-board Digital Audio Processing (Each)<br><br> This is the second redesign of the popular SRM450. The version 3 iteration of this sound reinforcement industry standard offers numerous features unavailable on previous models. It is a 1,000-watt powered enclosure with a 12" LF driver and a 1.4" HF compression driver, a precision two-way crossover and some output processing that you will really appreciate.<br><br> The SRM340v3 has a "built-like-a-tank" chassis that is cut in such a way that it is also an excellent wedge floor monitor. Not only that, there is a voicing select switch that when engaged for monitor use, adds greater upper end clarity for vocal intelligibility and an enhanced feedback rejection. When using the SRM450v3 in a DJ context, the Speaker Mode switch adds just the perfect low end bump. It likewise has a setting optimized for solo entertainers.<br><br> A flexible two-channel mixer is installed in the back panel as well, allowing you to use one SRM450v3 as an entire PA system. The built-in mixer features two XLR/TRS combination jacks, stereo RCA inputs and discrete gain controls for each channel. Lightweight, versatile, loud and clear.<br><br> FEATURES:<br> -1,000-watt Class D and AB power amps with 12" high-output LF driver and 1.4" titanium dome compression driver <br>-Precision 2-way crossover, driver alignment and phase correction <br>-Onboard feedback destroyer <br>-2-channel mixer features XLR/TRS combination jacks and stereo RCA inputs <br>-Smart Protect DSP component protection <br>-Use for mains or stage monitoring <br>-Lightweight

DRM Series Professional Powered Loudspeakers feature class-leading power, Advanced Impulse™ DSP for unmatched clarity, and the DRM Control Dashboard™ with full-color display for easy control.<br><br>DRM Series Professional Powered Loudspeakers represent decades of innovation in acoustic, DSP, and amplifier design. Combining extensive tuning, premium components, and cutting-edge DSP – DRM Series Loudspeakers deliver the power, clarity, and ease of use you’ve been dreaming of in a system that won’t cost a fortune.<br><br> The DRM Series is perfect for mobile DJs, bands, clubs, houses of worship, production/install, and more. Available in multiple point source configurations, line array, plus companion powered subwoofer.

The Thump15BST delivers chest-thumping low end, thanks to Mackie's proprietary Dynamic Bass Response, along with wireless control and Bluetooth streaming. The built-in three-channel digital mixer features a pair of Vita+ preamps with Wide-Z technology, effortlessly handling mic, instrument, and line-level signals. It's easy to get great sound with the Thump15BST — channels one and two supply you with a three-band EQ and variable highpass filters, and six application-specific speaker modes tailor the speaker to your situation. Complete with a durable road-ready enclosure and robust system protection, the Thump15BST is great for DJs and electronic musicians.

Armed with a 12" low-frequency driver, Mackie's redesigned Thump12A features a Class D amplifier with their proprietary Dynamic Bass Response for detailed midrange and abundant bass that are ideal for small venues, such as coffeehouses. The built-in two-channel mixer's Vita preamps are loaded with Wide-Z technology, effortlessly handling mic, instrument, and line-level signals. The Thump12A is a breeze to use, thanks to four application-specific speaker modes that tailor it to your situation. Additionally, the Thump12A's portable design makes for easy setup and tear down, which will save time and make life easier. Complete with a durable road-ready enclosure and robust system protection, The Mackie Thump12A is primed to handle any gig.<br><br>The Thump12A pumps out a massive amount of sound for its size. Its high-output woofer generates ample quantities of throbbing bass, and its 1.4" titanium dome driver ensures even, wide dispersion. Ultra-efficient Class-D amplification with Mackie's proprietary Dynamic Bass Response pushes plenty of power to the high-frequency compression driver and high-output woofer. And you don't need to worry about damaging your speaker, thanks to the Thump12A's next-generation system protection and thermal limiting.<br><br>Connecting your gear to the Thump12A is a piece of cake — its built-in two-channel mixer features Vita preamps with Wide-Z technology, so they accommodate microphone, line-level, and instrument signals. An XLR thru output makes for effortless wired connection to other Thump speakers, while flexible mounting options allow tripod- and pole-mounting, as well as stage monitor use.<br><br>The Thump12A divides high and low frequencies using a precision two-way crossover, while also time aligning the signals so that your audience hears low and high frequencies in sync. And you'll always sound your best, thanks to application-specific speaker modes that optimize your system for your situation.

The Mackie SRM550 powered loudspeaker delivers 1,600 watts of crystal-clear audio through a single 12" woofer and a 1.4" titanium tweeter. Perfect for sound reinforcement or a soloist, the SRM550's 2-channel mixer sports dual XLR/TRS jacks and a pair of RCA inputs. The rugged all-wood, internally braced cabinet uses a tough 18-gauge steel grille to protect its speakers. High-Definition Audio Processing and Smart Protect DSP give you unmatched audio quality and gig-saving speaker protection at every gig. The Mackie SRM550 is the high-powered, multifunction, compact powered speaker you've been looking for.<br><br>Mackie SRM550 Powered Loudspeaker at a Glance:<br>-High power and big sound for a wide range of applications<br>-Built-in mixer and processing are perfect for solo performances<br>-Smart DSP enhances your sound and saves you time<br><br>High power and big sound for a wide range of applications<br>-The Mackie SRM550 packs a punch with 1,600 watts of crystal-clear sound. And its smart design makes it the ideal speaker for lots of different uses: use a pair as main speakers on speaker poles, wall-mount it as a backfill speaker in your venue, or use them as stage monitors. The SRM550's single-button speaker mode lets you set up the speaker for your intended use faster than ever, just choose between PA, DJ, Monitor, or Soloist modes and start playing. Each mode is EQ optimized to give you the best sound possible.<br><br>Built-in mixer and processing are perfect for solo performances<br>-While the high power and performance of the SRM550 is perfect as part of your main rig, the flexible XLR/TRS combo inputs and RCA inputs make it a great speaker for solo use. Connect your drum machine, your guitar, or a vocal microphone, and you're ready to go. Mackie's Wide-Z inputs and High-Definition Audio Processing optimize the sound of anything you plug into them. Smart Protect DSP will step in and protect your speaker when it gets pushed a little too hard.

The Thump12BST delivers detailed midrange and abundant bass, thanks to Mackie's proprietary Dynamic Bass Response, along with wireless control and Bluetooth streaming. A built-in three-channel digital mixer features a pair of Vita+ preamps with Wide-Z technology, effortlessly handling mic, instrument, and line-level signals. It's easy to get great sound with the Thump12BST — channels one and two supply you with a three-band EQ and variable highpass filters, and six application-specific speaker modes tailor the speaker to your situation. Complete with a durable road-ready enclosure and robust system protection, the Thump12BST is great for small venues, such as coffeehouses.

Armed with a 15" low-frequency driver, Mackie's redesigned Thump15A features a Class D amplifier with their proprietary Dynamic Bass Response for a chest-thumping low end that's ideal for DJs and electronic musicians. The built-in two-channel mixer's Vita preamps are loaded with Wide-Z technology, effortlessly handling mic, instrument, and line-level signals. The Thump15A is a breeze to use, thanks to four application-specific speaker modes that tailor it to your situation. Additionally, the Thump15A's portable design makes for easy setup and tear down. Complete with a durable road-ready enclosure and robust system protection, The Mackie Thump15A is primed to handle any gig.<br><br>The Thump15A pumps out a massive amount of sound for its size. Its high-output woofer generates ample quantities of throbbing bass, and its 1.4" titanium dome driver ensures even, wide dispersion. Ultra-efficient Class-D amplification with Mackie's proprietary Dynamic Bass Response pushes plenty of power to the high-frequency compression driver and high-output woofer. And you don't need to worry about damaging your speaker, thanks to the Thump15A's next-generation system protection and thermal limiting.<br><br>Connecting your gear to the Thump15A is a piece of cake — its built-in two-channel mixer features Vita preamps with Wide-Z technology, so they accommodate microphone, line-level, and instrument signals. An XLR thru output makes for effortless wired connection to other Thump speakers, while flexible mounting options allow tripod- and pole-mounting, as well as stage monitor use.

The Mackie SRM650 powered loudspeaker delivers 1,600 watts of crystal-clear audio through a single 15" woofer and a 1.4" titanium tweeter. Perfect for sound reinforcement or a soloist, the SRM650's 2-channel mixer sports dual XLR/TRS jacks and a pair of RCA inputs. The rugged all-wood, internally braced cabinet uses a tough 18-gauge steel grille to protect its speakers. High-Definition Audio Processing and Smart Protect DSP give you unmatched audio quality and gig-saving speaker protection at every gig. The Mackie SRM650 is the high-powered, multifunction, compact powered speaker you've been looking for.<br><br>The Mackie SRM650 packs a punch with 1,600 watts of crystal-clear sound. And its smart design makes it the ideal speaker for lots of different uses: use a pair as main speakers on speaker poles, wall-mount it as a backfill speaker in your venue, or use them as stage monitors. The SRM650's single-button speaker mode lets you set up the speaker for your intended use faster than ever, just choose between PA, DJ, Monitor, or Soloist modes and start playing. Each mode is EQ optimized to give you the best sound possible.<br><br>While the high power and performance of the SRM650 is perfect as part of your main rig, the flexible XLR/TRS combo inputs and RCA inputs make it a great speaker for solo use. Connect your drum machine, your guitar, or a vocal microphone, and you're ready to go. Mackie's Wide-Z inputs and High-Definition Audio Processing optimize the sound of anything you plug into them. Smart Protect DSP will step in and protect your speaker when it gets pushed a little too hard. The Mackie SRM650 is a versatile, road-ready powered speaker that you can depend on.<br><br>The Mackie SRM650 powered loudspeaker is smart. It's got multiband feedback suppression, built-in Smart Protect DSP to protect the drivers from signal clipping, and there are four speaker voice modes to help you fine-tune your sound.

1,200-watt, 15" Powered Subwoofer with Integrated Digital Crossover<br><br>The Mackie SRM1550 is a portable powered subwoofer that continues the SRM legacy of being compact and affordable without sacrificing performance or capability. Designed from the ground up to be the perfect match for SRM450 and SRM350 speakers, the SRM1550 delivers 600W of power (1200W Peak) paired with a custom high-output 15" woofer for powerful, room-shaking performance. It also features a variable digital crossover that includes presets for the Mackie SRM350 and SRM450.<br><br>600W RMS, 1200W Peak power paired with a 15″ custom high-output woofer with 3” voice coil delivers gig-level volumes with room to spare Same cosmetic design as the renowned SRM450<br><br>-Road-ready “Built-Like-A-Tank” design<br>-18mm, internally reinforced poplar cabinet and steel grille Front ported for maximum low-frequency extension and punch<br>-Stereo XLR inputs plus stereo XLR full-range and high-pass outputs<br>-Integrated digital crossover with variable control and presets for Mackie SRM350 and SRM450 loudspeakers<br><br>Smart Protect DSP kicks in to protect your investment when things get pushed a little too hard<br>-Built-in cup for easily pole-mounting full-range loudspeakers<br>-Portable design weighing in at 65.5 lb / 29.7 kg

The Mackie DRM18S 18” powered subwoofer combines performance with advanced technology. Its 2,000W (peak) Class-D amplifier and custom driver are housed in a rugged wooden cabinet. The DRM18S active sub is great for both mobile and installed line array applications. It can be flown in an array with the DRM12A. Mackie designed the DRM18S to deliver sound typically found only in pro touring PA systems. In addition to a line array configuration, the DRM18S can be positioned on the ground with a DRM212, DRM215 or DRM315 mounted above with its built-in speaker pole socket. Even the DRM12A can be mounted atop the DRM18S using a speaker pole. However you choose to deploy it, the Mackie DRM18S powered subwoofer brings potent low-end reinforcement to your PA system.

Canvas Speaker Bag for Mackie SRM350 and C200 Speakers, with Zippered Openings, Accessory Pouch, and Extra-wide Shoulder Strap — Black

Protect your investment with the Mackie Speaker Bag. Designed specifically to hold the SRM450 and C300z speakers, this bag will ensure your bags are safe from dents, scratches, wear, and dust. Featuring high density padding and a shoulder carrying strap for easy transport.

Cover for SRM550 Loudspeaker with Durable Nylon Construction

Store, transport, and protect your SRM650 Loudspeaker from dirt, dust and scratches with the black Padded Loudspeaker Cover from Mackie. The cover is constructed with nylon and foam padding. Users will appreciate the handle access openings, accessory pocket, and white Mackie logo on the front.

Mackie's Thump18S 1200W 18" Powered Subwoofer features a professional band-pass design that delivers class-leading output and deep, room-filling lows. Designed by the world's leader in portable live sound, the Thump18S provides ample power for your high-output applications, bringing your Mackie Thump or SRM system to an entirely new level. A full set of professional input/output connections provides simple integration and sonic optimization of any system. Plus, there's ample protection in place to protect your investment. With tons of power and a high-output/deep punch band-pass design, the Thump18S is the perfect subwoofer to complete your professional PA.<br><br> 1200W of Room-Shaking Low End<br>The Thump18S features a professional band-pass design for maximum output and deep, room-filling low end. The custom-designed 18" woofer is designed to handle the amazing power of the 1200W Class-D amplifier. Class-D amps run cooler than traditional designs, with minimal risk of thermal shutdown when used in hot venues or outdoor environments.<br><br> Total System Optimization<br>Optimized and tuned for ideal performance under the strenuous conditions of live sound applications, the Thump18S always sounds its best. A precision crossover (140Hz) is perfect for giving the right signal to the top boxes and highly-accurate tuning filters are in place to make sure you get powerful bass that sits right in the mix. There's even powerful system protection that automatically works when things get pushed too hard.<br><br> Application Flexible<br>Ready for professional applications, Thump18S features all the right I/O to get the job done. Dual XLR inputs handle mono or stereo sources while dual XLR full-range and high-pass outs deliver the output flexibility you need. User-adjustable level and polarity controls offer additional control.