An easy-to-carry speaker stand made of high quality aluminum. Fiberglass-reinforced fittings and an additional safety pin ensure stable support for the speakers. The height and feet adjust by an easy-to-use clamping lever.

Entry-level, low-priced microphone stand. The practical swivel joint allows the one-piece boom arm to be simultaneously positioned for tilt and length. Thanks to a low weight of only 4.075 lbs, it is particularly suitable for the mobile musician. The stand requires little space as its base diameter is only 25.984". The large foot end caps help to make the stand stable and reduce unpleasant transmission noise.

The K&M 23200B table-top microphone stand features a round cast iron base and measures 7" in height.

The K&M 21020 (Black) tripod microphone stand and boom offers lightweight and sturdy support for live sound and recording applications. The stand features a fixed length boom measuring at 33" with adjustable height between 35.50 - 65".

Folding, short-legged design with die-cast base. Noiseless height-adjustment.

Extra low design for bass drums or special use. Die-cast base with folding legs. Comes complete with boom arm.

The K&M 25950 REIN Microphone Stand is a low-profile tripod microphone stand and boom combination, suitable for capturing sound from bass drums and low lying amplifier cabinets. The all-metal stand features a fixed height of 11" (280mm). The included boom features a variable length between 16.73 to 28.54" (425 to 725mm).

Orchestra music stand, black, with perforated music desk 500 x 340 mm, extendable in two steps, comes in a carrying bag

The collapsible guitar stand accommodates all kinds of guitars, banjos and basses. The height can be adjusted by an easy-to-use clamping lever. The stand is equipped with a locking mechanism to prevent turning, a solid and collapsible yoke construction wi

The K&M Popkiller - a world-wide classic. For stands with diameter of up to 30 mm. Double nylon screen for superior performance. Unobtrusive black round filter frame. Non-marring locking screw prevents scratching of mic stand.

Our best X stand - comfortable and extremely sturdy. The new design of the double brace stand tubes provides for perceptible stability and safety. The ergonomic clamping lever makes it easy to setup and collapse the keyboard stand. The robust metal joint

1/2" and 3/8" female thread, 5/8" 27 gauge male thread.

A collapsible guitar stand for holding all kinds of guitars. The instrument support arms adjust to fit various guitar sizes. The support arms are lined with a soft plastic material to protect the instrument finish. The height can be adjusted by an easy-to

With the unique »Soft-Touch« one-hand clutch the height can be adjusted with a quick squeeze to easily raise and lower the mic. Sleek, flat, cast-iron base is very stable and durable. Quality black powder coating is extremely durable.

The large Popkiller for modern studio engineering. The large 200 mm nylon screen guarantees optimum sound filtering during studio recording. The Popkiller with flexible gooseneck can be screwed to all standard microphone stands (rod diameter max. 30 mm).

Our best guitar-holder. Screw-mount. Features flexible support arms for various guitar models, covered with non-marring rubber to protect the instrument.

K&M’s colorful collection of music stands helps to make music fun for kids of all ages. Folding, 3-piece telescopic design.

Our best guitar-holder. Screw-mount. Features flexible support arms for various guitar models, covered with non-marring rubber to protect the instrument.

The new generation of X-Stands for stage pianos is comfortable and convenient. The ergonomic clamping mechanism makes setup or break down easy and fast. The robust metal joint can be adjusted in 5° intervals; the short intervals provide the user with a mu

This practical and high quality wall mount provides a safe and secure hold for your instrument. The wall mount is quick and easy to mount - it only takes two screws. The support arms are covered with non-abrasive and durable rubber. The ukulele wall mount

For electric guitars. Stable, sturdy, simple and easy to adjust and fold. Width adjusts from 220 to 350 mm. Support arms are covered with exclusive non-marring material to protect instrument finishes.

Our popular, smooth-running microphone desk arm with 3/8" or 5/8" thread connector for sound studios and multimedia work stations with a new innovative table clamp. Easy to position and suitable for microphones to max. 0.8 kg. The 5 m long microphone cabl

Screw-mount. Adjustable for right or left facing. Support arms covered with non-marring rubber to protect the instrument.

Short one-piece boom arm with 5/8" thread. Locking washer and plastic grip. Smooth adjustment. Easy to tighten with wing nut.

Optional stacker for 18930 and 18990, fully adjustable in height, depth and tilt to accomodate various types of instruments. All-metal construction, black powder-coated. Big non-marring pads to protect the keyboard. The new all-metal teeth locking devices

Specially designed folding die-cast base with built-in anti-vibration filters in legs. Stand isolates microphone from vibrations. Well suited for recording studios.

Right- or left-facing instrument support. Black powder-coated, flat steel. Protective covering on instrument support.

Round steel, diameter 10 mm, length 300 mm, black powder-coated.

K&M’s colorful collection of music stands helps to make music fun for kids of all ages. Folding, 3-piece telescopic design.

The telescopic microphone stand with a 5/8” threaded connector is extremely versatile. Its height can be adjusted from 230 to 400 mm using the practical clamping lever. This light-weight three-legged stand with folding legs is suitable for mobile operation. The robust foot end caps provide stability and reduce undesirable transmission noise.

The 26010 from K&M is a microphone stand with a cast-iron round base and an anti-vibration rubber insert to combat noise filtration. This sturdy stand has an attractive gray soft-touch powder coating.

K&M’s colorful collection of music stands helps to make music fun for kids of all ages. Folding, 3-piece telescopic design.

This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design with a new innovative table clamp for quick and easy positioning of a microphone in the studio or at a multimedia work station. The 6 m long internally guided microphone

Compact holder to attach microphones to drums, esp. bass drums. The microphone can be slided up to 70 mm on the mounting rail and placed very near to the drum. Easy mounting, no parts to lose. Rubber washer and inserts absorb noise and shock, "RIMS" suita

A practical music and instrument tray made of aluminum with felt inner-lining. Attaches to K&M stands with tubing diameter up to 30 mm.

With this universal holder you have your smartphone always at hand. The holder is suitable for all smartphones, such as e.g. iPhone 4, iPhone 6 Plus or Samsung Galaxy with widths ranging from 44 to 84 mm. Operation is quick and easy . Place the smartphone

For various harmonica models. Elegant harmonica holder with professional features. Fully adjustable spring-tension instrument holder. Neck frame is covered with exclusive soft rubber material for more comfort.

Our best guitar-holder. Screw-mount. Features flexible support arms for various guitar models, covered with non-marring rubber to protect the instrument.

K&M’s colorful collection of music stands helps to make music fun for kids of all ages. Folding, 3-piece telescopic design.

This practical and extremely stable table stand is perfect for laptops, DJ systems and other multimedia equipment. The support arms can very quickly and easily be tilted to max. 33° in 5 stages. Self-adhesive rubber protectors and soft caps protect the eq

Complete piano bench with seat cushion and integrated sheet music storage. Solid European beech wood, varnished with four coats of polyester. Stable legs with non-slip rubber end-caps. Dual crossbar mechanism for easy and precise height adjustment. Heavy

Adjustable folding stand for curved Soprano Saxophones. Fiberglass reinforced plastic base. Flexible upper support arm for different bell sizes. All instrument support parts covered with exclusive non-marring plastic coating.

Stable footrest, height-adjustable to 6 different positions. Large non-skid plastic pad and heavy-duty legs for added stability. Individually packed.

Two-piece telescopic boom arm with 5/8" thread. Complete with locking washer and plastic grip. Smooth, silent and scratch-free adjustment thanks to large wing nut.

K&M’s colorful collection of music stands helps to make music fun for kids of all ages. Folding, 3-piece telescopic design.

A clever way to show off your iPad. The mount is guaranteed to hold the iPad (Air 2 or Pro 9.7") effectively and safely. For use on stage, in the rehearsal room or at home - the 3/8“ internal thread means the holder can be attached to any microphone stand

Designed to carry 2 K&M microphone stands. Made of waterproof nylon. Black with screenprinted logo. Two inside compartments with zipper and sturdy handles.

Lightweight, adjustable 3-piece aluminum tube used for remote positioning of microphones for recording and broadcasting. Rough textured hand-grips and secure locking rings.

Professional carbon microphone fishing pole. The exceptional characteristics of this microphone fishing pole include sturdiness and high stiffness considering its light weight. The four clamps with the innovative locking system are easy to use and provide

Plastic material, 3/8" female thread, 5/8" 27 gauge male thread.

This compactly folding cello stand is an excellent stand for use on the road or at home. It looks good and stores your cello safely until your next performance. The surfaces, which come in contact with the instrument, are covered with an attractive rubber

The 19792 Tablet PC Table Stand from K&M is a universal tablet holder for desktops designed to keep portable devices nearby for easy access. It can be used for reading, surfing the internet, or just watching videos or looking at pictures. The individually adjustable support arms can accommodate tablets ranging in height from 8.7 to 13" and a width from 5 to 9.1". The depth of the tablet can vary between 0.2 and 0.4". The support arms are set by adjusting the clamp screws to the size and depth of the tablet. Furthermore, the tablet can be attached and detached quickly using a snap lock. A wing nut is available to adjust the angle from 0 to 90°. The stand can switch between portrait and landscape positions and there is no danger of the tablet switching positions by itself.

Lightweight, 4-piece glass fibre rod combination, extra long. Supports 0.5 kg. Microphone cable can be routed through the tubing. Padded, anti-slip grip section. Folds compactly into a practical carrying case.

The K&M 12182 Laptop Stand Tray is intended to mount to the K&M 12180 laptop stand (sold separately), and provide shelf-space for a hard-drive, audio interface or other peripheral. The tray includes a support arm and all necessary installation hardware.

Double storage with »Double«! Wherever space is at a premium. The new stand for 2 guitars is proving very popular. Acoustic, electric or bass guitar – the patented hanger grasps the guitars firmly and securely. The firm grip is provided by the individual

The K&M 221D Microphone Mounting Flange installs into desktop surfaces and features a 5/8" hexagonal screw for vertical connection of goosenecks, microphone mounts, etc. A 4mm cable entry hole hides the cable run and enables easy installation.

Short stand with small cast iron base. Well suited for microphoning amps, percussion, etc. The circular rubber insert ring filters foot step sounds and reduces the transmission of unwanted sounds. Sleek adjustable clutch for easy height adjustment.

K&M 26010 Microphone stand. Round base with an integrated steel plate with an attractive plastic cover, with anti-vibration rubber insert for noise filtration. White

Features flexible support arms for various guitar models, covered with exclusive non-marring plastic material to protect the instrument. Screw-mount, adjustable for right or left facing.

Professional, black powder-coated aluminum keyboard stand. The stand is height-adjustable from 630 mm up to 960 mm. Can be used with stackers to hold additional keyboards.

The K&M 255 Microphone Stand is a low-profile tripod microphone stand and boom combination, suitable for capturing guitar cabinets, amplifiers, percussion instruments, etc. The all-metal stand features a fixed height of 11.41" (290mm). The included boom features a variable length between 34.25 to 61.02" (870 to 1550mm).

You have your drum sticks always at hand with this comfortable holder. The large quiver, ø 90 mm provides enough room for several drum stick sets. With a depth of 240 mm the sticks are also securely stored. Thanks to the proven clamping element, the holde

This new König & Meyer wall holder is second only to a violin case as a safe storage option for your violin. The violin is clasped at the curved end of the peg box to prevent inadvertent adjustment of the pegs. The dimensions of the wall holder are such t

Worldwide proven guitar stand. The instrument is particularly well cared for thanks to the elaborate new rubber structure. With the innovative adjustable cross bar, guitars of different sizes or even other instruments such as a cello or French horn can be

Additional support arms for keyboard stand »Spider«, black or silver. Comes with clamp to attach the arms to the column.

The combination of the stand and the Universal Tablet Holder supports you on stage, at home or in the studio. The individually adjustable support arms can accommodate the use of tablets ranging in height from 220 to 331 mm and width from 128 to 232 mm (fo

Sturdy carrying case for 6 microphone stands. Separate internal compartments prevent scratching and damage of the stands. The case comes with padded handles and an adjustable shoulder strap. Plastic rubber feet protect the bottom of the case.

The black 23250 Design Microphone Table Stand from K&M features a flat line design and functionality. Its flat and stable foot provides an easy to use space-saving construction. A wide surface area on the back is suitable for labelling. Four rubber feet reduce unwanted noise from reaching the microphone. Stable and sturdy Surface area for company logo etc. Space-saving flat foot construction

is a universal tool for repair and tuning out electric guitar. As part of a universal instrument is a Phillips screwdriver, slotted screwdriver, steel string cutters, several types of hex keys and more. This tool is especially useful for those who frequently change the strings, tune your guitar Scale, engaged in minor repairs and operational development tool "to mind. " The design uses steel, which ensures long years of operation even under the most intensive use. The universal tool for repair and tuning out electric guitar

Sturdy, professional drum throne with foldable 3-leg base. Wide base for added stability. Wobble-free locking height-adjustment mechanism is extremely functional and user-friendly.

Compact, stable aluminum violin stand. Fully height adjustable instrument support arms can be adjusted to fit a variety of violin sizes. The instrument support arms are lined with soft plastic material to protect the instrument finish. Height adjustment u

Have you ever inadvertently left your guitar on top of a cable or jack plug? It simply cannot happen with this unique four guitar stand. The newly developed guitar stand is the ideal stage companion, but it also does a superb job in the studio or at home. Thanks to the moveable hanger and easy height adjustment, up to 4 acoustic, electric and bass guitars are always easy to hand and ready for playing. Even unusually shaped guitars can be stored safely. Large soft foam rolls protect the guitars from inadvertent knocks or bumps. The "fit-for-tour" steel tube construction is stable and durable. The base legs can be folded with little effort into a compact and flat package for transport.

Its compact steel tubing construction and large round floor protectors make this attractive keyboard stand significantly more stable. Two sided spring-loaded locking screws make precision height adjustment easy. The support arms can be adjusted to suit th

4 fittings to mount spotlights to lighting stand 24620 or cross bar 24622.

The standard lighting stand constructed from steel tubing has been significantly improved. The new legs with tubing diameter of 35 mm guarantee stability and safety. Lasered bore holes and durable, robust plastic saddle washers improve the coefficient of

The K&M 28130 Folding Amplifier Stand is a heavy-duty monitor speaker and amplifier stand for stage and recording applications. The stand features a load capacity of up to 77.16 lb (35 kg) and three tilt adjustment positions provide varying angles for ideal speaker positioning. The 28130 includes standard microphone boom threads to attach K&M microphone booms.

Light for grandstand '' Ovation '' model '' Neat Flex ''<br> The »Ovation« lectern with its proven features and easy handling is the perfect presentation tool for creative use in hotels, museums, galleries, halls, and many other public and private meeting places. Besides holding the speaker's script, this smart, silvery lectern has space for additional presentation hardware (such as a notebook). And even in the sloping position, there is enough level space for a glass of water, etc.

No matter whether you play guitar, keyboard or another instrument, this redesigned stool lends the right support for your back every time you play. The ergonomically shaped seat will perceptibly relieve pressure on your back and prevent premature tirednes

This advanced piano bench offers the pianist pure comfort. Built-in pneumatic springs allow the height of the bench to be adjusted while sitting comfortably. Your preferred sitting position can be found in no time at all with the easy-to-use adjustment h

Compact recorder stand with 4-leg base for alto recorders and/or tenor recorders. Plastic peg with steel core, diameter 9 mm. Folded up the stand fits in almost every pocket.

Attaches to music stands. Clamp adjustable to 30 mm. Support arm covered with non-marring material to protect the instrument.

The new headphone holder including an innovative table clamp is a guaranteed secure and comfortable holder for your headphones. The holder protected with soft rubber can easily hold 2 standard headphone sets and 2 in-ear headphones can additionally be hun

Ideal for headphones, cables or other technical equipment. The stable headphone holder has a 180 degree swivel and can be turned away to save space if it is not needed. The rubber support has a strong and robust steel core. A massive metal plate is the ba

Its compact steel tubing construction and large round floor protectors make this attractive keyboard stand significantly more stable. Two sided spring-loaded locking screws make precision height adjustment easy. The support arms can be adjusted to suit th

The ideal addition to the table-style keyboard stand Omega 18810. No matter whether you want to connect a second keyboard or a laptop, the new stacker allows you to do either. The large lower support arms can hold the largest of keyboards. The upper support arms can easily carry a load of 55.066 lbs. A spring-loaded clamping screw makes the attachment fast and easy to adjust to the height you require. With a selection of eight different heights, it is easy to find a height to suit you. Self-adhesive rubber protectors prevent scratches or keyboard slip.

The K&M 23266 Table Top Microphone Stand (Gray) is a small and inobtrusive, yet it solidly supports your microphone in its compact base. An anti-vibration felt insert gives you some added sound filtration while the 3/8" thread holds your microphone firmly in place.

The K&M 236 Microphone Mounting Bar features four 5/8" locking screws for mounting up to four microphone mounts. The 236 may be mounted onto a standard microphone stand and is an ideal solution for live capturing live sound.

Mic arm; Ø 30 w. boom arm; 5/8"; black

High quality lighting stand for professional use. New die-cast zinc clamps and the larger aluminum leg tubing enhance safety. Height adjustment to any height is by means of a hand crank and push button system. The integrated M10 thread adaptor can be used

Perfect for amplifiers or monitor speakers. The support arms have a tilt angle of 42° and are height-adjustable. The stand is foldable for easy transport.

Heavy-duty steel construction. Four casters, two lockable. Angle adjustable to 45° with spring-loaded locking mechanism. 12 space units in top section, 9 in lower section. Cage nuts incl. (32 pcs.). Rack shelves, drawers, blank and ventilation panels are

To mount half rack components, wireless units, and other gear horizontally. 1 space with several drillings for consumer equipment, appr. 240 mm deep.

Foldable 3 legged table-top tripod for laptops and multimedia equipment, also suitable for manuscripts, lecture notes, sheet music, etc. The continuous-tilt mounting plate is simply attached with a prismatic connector to the stand.

For A and B clarinets. Plastic peg with nickel-plated tripod base. Feet foldable for compact storage.

This practical ukulele holder is flexible and easy to mount. The clamp can be attached to any tube with a diameter ranging from 7 to 30 mm. Thanks to the rubberized support arms the instrument is safe and protected. The ukulele holder is suitable for all

The silver K&M 18850 Spider Keyboard Stand is an adjustable double-tier keyboard stand that measures 4.63-feet (1410mm) in height for seated or standing positioning and easy set up. The 18850 Spider is equipped with dual-tier support arms.

The black K&M 18850 Spider Keyboard Stand is an adjustable double-tier keyboard stand that measures 4.63-feet (1410mm) in height for seated or standing positioning and easy set up. The 18850 Spider is equipped with dual-tier support arms. The tiers are height adjustable and can be secured at any position on the vertical stand. The tiers and legs fold into the support tube for easy transport and storage. The 18850 Spider is capable of supporting up to 77 lb (35 kg) per tier and is an ideal solution for touring musicians, home studios, etc.

The »Spider Pro« is the further development of the »Spider« keyboard stand. The »Spider Pro« is equipped with a pair of extendable support arms, as well as an additional pair of extendable support arms with a 15° tilt angle. The »Spider Pro« can be fitted

The »Spider Pro« is the further development of the »Spider« keyboard stand. The »Spider Pro« is equipped with a pair of extendable support arms, as well as an additional pair of extendable support arms with a 15° tilt angle. The »Spider Pro« can be fitted

Multi-purpose wall mount for speakers. The mounted speaker can be swiveled to the sides and tilted up to 30°. Easy mounting by convenient hooking in and screw locking.

Zinc die-cast base with three-band XLR-connector. With LED indicator on / off the microphone, with the '' goose neck '' 400 mm and the connecting NC3FX connectors for secure mounting to the base

The K&M 100/1 Music Stand is rugged and available in an assortment of colors that are ideal for presentations, music instruction, etc. The 100/1 features a folding tripod base and a telescoping height between 24.40 to 48.81" (625 to 1240mm).

Powder coated aluminum music stand with a steel plate. Connecting parts made out of durable plastic. The music desk can be removed and attached easily with its user friendly and practical quick release mechanism. A large wing-nut makes it easy to adjust t

Stable orchestra music stand made out of steel. Connecting parts made out of durable plastic. The music desk can be removed and attached easily with its user friendly and practical quick release mechanism. A large wing nut makes it easy to adjust the angl

Stable footrest, height-adjustable to 6 different positions. Large non-skid plastic pad and heavy-duty legs for added stability. Individually packed.

Worldwide proven guitar stand. The instrument is particularly well cared for thanks to the elaborate new rubber structure. With the innovative adjustable cross bar, guitars of different sizes or even other instruments such as a cello or French horn can be

With the adapter the table-style keyboard stand »Omega« 18810 can be extended even further. The universal holder 18817 can be quickly and easily mounted onto the stand.

Additional extendable support arms for the »Spider Pro« keyboard stand; available in black, silver or red with fastening clamp.

A practical add-on for the »Spider Pro« and »Baby Spider Pro« keyboard stands. The robust attachment is a secure holder for a laptop. The stable arms can be tilted easily and quickly. Four positions are available, covering a tilt from horizontal to 25°. T

Extremely sturdy overhead mic stand for studio and broadcast applications. Extendible up to 2 m. Locking height-adjustment mechanism for added safety. 1/2" thread for use with 21231 boom arm. Collapsible design for easy transport and storage.

The 233 from K&M is a Table Top/Floor Microphone Stand. Weighing in at 5.5 lbs (2.5 kg), the 233 has a cast iron base with a sound absorbing rubber insert. The 233 is height adjustable and extends from 14-23" (355-580mm).

The amp stand can hold monitors, amps or other equipment to a max. weight of 35 kg without a problem. The angled front legs have significantly improved the stand’s stability and strength. The low centre of gravity ensures even larger amps are securely dis

K&M’s colorful collection of music stands helps to make music fun for kids of all ages. Folding, 3-piece telescopic design.

K&M’s colorful collection of music stands helps to make music fun for kids of all ages. Folding, 3-piece telescopic design.

K&M’s colorful collection of music stands helps to make music fun for kids of all ages. Folding, 3-piece telescopic design.

Compact, all-aluminum orchestra stand that’s perfect for the traveling professional. A prismatic »V-block« connector attaches the removable desk to the stand.

Unique music stand light which operates with 3, 6 or 9 batteries or rechargeable batteries (AA). 9 batteries provide up to 24 hours of light. Designed for indoor and outdoor use. High-efficiency electronic lighting system. The light can also be used with

The K&M battery light 12285-000-55 with power unit 12280-000-00, packed in an attractive carrying case.

Konig & Meyer backrest attaches to K and M drum thrones 14015/14016, 14055/14056 and stool 14052/14053. Adjustable in height and distance from the seat. Oval cushion covered with black imitation leather.

Multi-purpose stool, ideal for keyboardists, bassists, etc. Very sturdy tripod base. Wobble-free height adjustment mechanism, foldable. Large, comfortable seat covered with black imitation leather or wear-resistant black fabric.

A sturdy, high-quality drum throne featuring an ergonomically-designed seat. Wobble-free locking height-adjustment mechanism is extremely functional and user-friendly. Large 3-foot radius for best-possible stability. Fully-foldable. Molded seat covered wi

Extremely wide keyboard bench, sturdy tubular steel, height-adjustable, wobble-free design, collapsible for easy transport, black imitation leather or wear-resistant black fabric seat 650 x 300 mm.

The 14100 double bass stand is a high quality product. Its stable support arms have a protective rubber coating and the stand is easy to fold for transport. The newly developed V-shaped base for the endpin means it is easy to place the instrument securely

Stable footrest, height-adjustable to 6 different positions. Large non-skid plastic pad and heavy-duty legs for added stability. Individually packed.

For electric guitars, for convenient playing. 2-way height adjustment. Felt-lined instrument support arm. Angle and length adjust to your needs.

For acoustic guitars, for convenient playing. 2-way height adjustment. Felt-lined instrument support arm. Angle and length adjust to your needs.

For German and English tubas. Supporting arms fully adjustable in height and width. Arms are covered with exclusive non-marring material to protect instrument finishes. Big bottom instrument support with non-marring material to protect the instrument from

The Guardian securely holds up to 5 E-guitars or base guitars, saving space. Specially adjusted and cushioned instrument supports and the flexible protective arms provide a secure grip. The Guardian is easy to transport and carry thanks to an innovative f

Wherever you go! The new guitar stand »Memphis Travel« is perfect for travel. Thanks to its small size, no more than a DIN A4 sheet in height and its amazingly low weight of only 400 g, it belongs in every Gig Bag. The adjustable support arms mean the sta

Ideal to attach a second keyboard or laptop to the keyboard stand 18810. The large laptop support arms can hold the largest of keyboards. The upper support arms can take a max. load of 25 kg. The stacker can be adjusted to the height you require using the snap and clamping knob. There are 8 heights to choose from. The upper support arms can be tilted in 5 different positions from 0° (horizontal) to 20°. Self-adhesive rubber pads prevent scratches and instrument slip.

To store and transport keyboard stand »Spider« 18850 and »Spider Pro« 18860. Waterproof sturdy nylon fabric. Features wrap-around zipper and 2 nylon handles.

Additional extendable 15° tilt angle support arms for the »Spider Pro« keyboard stand; available in black, silver or red with fastening clamp.

Additional extendable 15° tilt angle support arms for the »Spider Pro« keyboard stand; available in black, silver or red with fastening clamp.

Strength and stability! The mobile table stand for your iPad Air 2. The iPad Air 2 is held safely and securely thanks to the sturdy steel base. With this high-quality table stand, you can easily read, write, surf the Internet or just view pictures or videos without any vibrations. The iPad Air 2 clips in and out of the holder effortlessly. An easy-to-use wing nut adjusts the tilt so that every user can adapt the viewing angle to suit them optimally. The iPad Air 2 can be rapidly switched between the vertical and horizontal format without slipping.

The K&M 21021B overhead tripod microphone boom stand offers the height and durability needed for broadcast, sound reinforcement and professional recording. The boom length is fixed at 42" and the height is variable between 43 - 79". A 32" base diameter provides optimum stability.

Telescopic boom arm with 1/2" thread. Adjustable counterweight. For use with model 20811 and 21411.

Steel tube combination to connect satellite systems. With bottom M20 thread to attach connector plate 24116. Zero backlash and absolute vertical position. Height adjustment with spring-loaded locking screw and safety bolt.

Worldwide accepted: the speaker stand 214/6 ‒ robust and sturdy. All clamps are high quality zinc die-cast. The leg construction and large fixed foot end caps enhance safety and stability. This professional stand is TÜV (German Technical Supervisory

Inexpensive, handy table microphone stand for professional use. Sturdy plastic base with collapsible light-weight plastic legs and 3/8" thread.

The K&M 25960 Microphone Stand is a low-profile microphone stand and boom combination, suitable for capturing sound from bass drums and low lying amplifier cabinets. The all-metal stand features a fixed height of 17" (430mm). The included boom features a variable length between 16.73 to 28.54" (425 to 725mm). The stand features a heavy cast-iron base for maximum support minimal vibration noise.

The 26045 from K&M is a straight microphone stand with a unique cut-out design to enable stacking for up to 5 stands. This sturdy stand has a comfortable clutch for easy height adjustment.

Attaches to stands with tubing diameter up to 30 mm. Steel clamping mechanism. Metal music desk is adjustable for angle and depth.

Adjustable folding stand for Eb Alto and Bb Tenor Sax. Fiberglass reinforced plastic base. Flexible upper support arm for different bell sizes. Lower support arm bracket with several vertical locking positions. All instrument support parts covered with ex

Black plastic peg with felt pads to protect the instrument. Detachable metal leg base screws into the peg so that the entire unit may be stored in the bell of the instrument for easy transport.

Worldwide proven guitar stand. The instrument is particularly well cared for thanks to the elaborate new rubber structure. With the innovative adjustable cross bar, guitars of different sizes or even other instruments such as a cello or French horn can be

Additional extendable support arms for the »Spider Pro« keyboard stand; available in black, silver or red with fastening clamp.

A distinctive tensioning mechanism means this holder is suitable for attaching tablet PCs like iPad mini, iPad, iPad Air, iPad Pro, Amazon Kindle, Amazon Fire, Samsung Galaxy Tab, Google Nexus, Asus Transformer or Microsoft Surface in size from 120 to 222

The industry standard for a mic stand and boom arm combination. Package consists of the 201A/2 microphone stand and the 211 boom arm. Folding base for ease of transport. Long legs for added stability.

A high quality steel speaker stand with zinc die-cast clamps for professional use. Infinitely variable height adjustment with a hand crank and push button system which prevents an uncontrolled reverse motion. There is an additional locking screw for extra

Mobile heavy steel microphone stand for studio or stage. 10 kg cast metal base, low centre of gravity for high level safety with 3 lockable castor wheels. Rod combination extends to over 2 m with additional locking mechanism. Extendable boom arm with a 3

5/8" 27 gauge female thread, 3/8" male thread.

Low-level stand with folding base, complete with long, 2-piece extendable boom arm.

Extra low design for bass drums or special use. Die-cast base with folding legs. Comes complete with boom arm.

Steel stand for monitors with 3-leg base, stable and solid. Height adjustable with a non-scratching locking screw and additional safety pin, internal cable routing possible.

Steel tube combination to connect satellite systems. With bottom M20 thread to attach connector plate 24116. Zero backlash and absolute vertical position. Height adjustment with spring-loaded locking screw and safety bolt.

Multi-purpose Mini light with extra bright LED (1 piece). Includes 3 batteries (1,5 V AAA). Gooseneck for a very flexible adjustable light beam. With clip to attach to music stands etc., also usable as desk lamp. Very compact and handy size, folded up onl