40W RMS, Single 10" Combo with Scrambler <br>Geared towards providing Ampeg's signature tone in a compact frame, the BA-110V2 is a 30W combo amplifier with a single 10" speaker that's designed for electric bass.<br> The amp can deliver a clean tone, or Ampeg's proprietary Scrambler Overdrive can be utilized to add distortion to taste. This unit sports a 3-band EQ, as well as a -15 dB pad to suit any electric bass, be it passive or active. Furthermore, this combo amp hosts two auxiliary inputs—one 1/4" and one 1/8"—for playing along with external sound sources, while a headphone jack allows you to practice quietly and discreetly. A 60° monitoring angle directs the sound closer to your ears. Lightweight at 33 lb, this amp is a portable option for many practice situations. Classic Ampeg Tone 30W RMS power 10" Ampeg Custom10 speaker Legacy Ampeg preamp with 3-band EQ Scrambler overdrive for tube-like tone Updates 60° monitor angle Aux inputs for playing along with smartphone or iPod Headphone output for silent practicing -15 dB input pad for active basses or additional level control Portability All-steel amp chassis Black metal corners Double-thick black Tolex Lightweight at 33 lb In the Box Ampeg BA-110V2 30W 1/X10 Combo Bass Amplifier Limited 2-Year Warranty on Electronics and Speakers

Bass Preamp Pedal and Direct Box with Overdrive, EQ, and Tone Controls <br>The SCR-DI by Ampeg is a single-channel, portable bass preamp intended for stage and recording use. Designed to bring tube-like grit to solid-state design, this DI provides on-board EQ controls and Ampeg's proprietary Bass Scrambler Overdrive, both of which can be switched on and off with the tap of your foot. Ultra-Hi and Ultra-Lo options are also provided, and a -15 dB pad jumper renders the unit suitable for both active and passive basses. Housed in die-cast zinc and secured by rubberized feet, the SCR-DI offers multiple connection points: one 1/4" input, two auxiliary inputs (1/4" and 1/8"), an 1/8" (3.5mm) headphone jack, a 1/4" thru port for connecting parallel effects processing, a 1/4" unbalanced line out, and a balanced XLR output. Finally, the unit features a ground lift switch to help eliminate electrical hum at the XLR port, and can be powered by either a 9V battery or a 9-12VDC external power supply (both available separately). Tonal control Legacy Ampeg preamp and tone-stack circuits 3-band parametric EQ with bass, mid, and treble Proprietary Ultra-Hi and Ultra-Lo selectors Proprietary Bass Scrambler Overdrive circuit help emulate classic Portaflex and SVT sounds Separate drive and blend controls Footswitches to toggle options on and off -15 dB pad jumper underneath bottom panel mitigates high-output sources

Protect your precious bass speaker cabinets with the Ampeg SVT-15E Cabinet Cover. This rugged and padded cover keeps you speaker cab free from dust and dirt while it is being stored or between gigs. No one likes moving gear in the rain, while the cover won't make it any more fun, it will keep your gear dry. You spent your hard earned money on your Ampeg speaker cab, why not protect it with a cover that's made to fit it? order your Ampeg SVT-15E Cabinet Cover today! <br>Ampeg SVT-15E Cabinet Cover Features at a Glance: <br>-Rugged nylon cover for Ampeg SVT-15E speaker cabinets <br>-Heavily-padded to keep your gear safe from bumps and dings <br>-Handle cut outs for easy transport <br>-Accessory pouch for holding cables, tuners, and more Embroidered logo

Ampeg’s BA-112 12″ Bass Combo delivers classic Ampeg tone and performance driven features at volume levels ideal for practice, rehearsal or small stages. With Ampeg’s all-new grinding Bass Scrambler™ overdrive and true 60-degree sound reinforcement monitoring angle for added clarity, the BA-112 is perfect for applications that demand great tone at manageable volume levels.

The PF-500 / PF-800 Bag from Ampeg is a protective nylon bag for the PF-500 or PF-800 bass amp head.

20W 1 x 8" Bass Combo Amplifier with 3-band EQ, Aux Input, 15dB Pad, and Headphone Output - Black <br>Geared towards providing Ampeg's signature tone in a more compact frame, the BA-108V2 is a 15W combo amplifier with a single 8" speaker that's designed for electric bass.This unit sports a 3-band EQ, as well as a -15 dB pad to suit any electric bass, be it passive or active. Furthermore, this combo amp boasts two auxiliary inputs—one 1/4" and one 1/8"—for playing along with external sound sources, while a headphone jack allows you to practice quietly and discreetly. A 60° monitoring angle directs the sound closer to your ears. Lightweight at 28 lb, this amp is a portable option for many practice situations. Classic Ampeg Tone 15W RMS power 8" Ampeg Custom8 speaker Legacy Ampeg preamp with 3-band EQ Updates 60° monitor angle Aux inputs for playing along with smartphone or iPod Headphone output for silent practicing -15 dB input pad for active basses or additional level control Portability All-steel amp chassis Black metal corners Double-thick black Tolex Lightweight at 28 lb

Ampeg’s BA-210 2x10″ Bass Combo delivers classic Ampeg tone and performance-driven features in a powerful 450W design perfect for keeping up with a full band. The ruggedly portable design provides a true 60-degree sound reinforcement monitor angle for added clarity on stage. The BA-210 features Bass Scrambler™ overdrive plus flexible tone-shaping and stage-ready features in a powerful 2x10″ combo.

Analog Bass Preamp Pedal with 3-band Tone Controls<br> <br>The Ampeg Classic Analog Bass Preamp pedal is like having a choice of Ampeg amps right on your pedal board. Dial in a wide range of authentic Ampeg tones with the 3-band tone stack and highly flexible Ultra-Hi and Ultra-Lo circuits. It’s the most affordable way into the pure analog bass tone of Ampeg.<br> <br>Features:<br> <br>-Delivers a wide range of authentic Ampeg tones <br>-Classic 3-band tone stack plus volume <br>-Ultra-Hi and Ultra-Lo circuits for tonal flexibility <br>-True bypass, analog design with incredible signal-to-noise ratio <br>-Roadworthy all-metal chassis construction <br>-9V DC supply or battery capable (not included)

The Ampeg Liquifier Analog Chorus pedal delivers incredibly rich tones thanks to its dual chorus circuit design. Experience classic dreamy chorus or turn it all the way up to transport your tone to a new dimension. Featuring a roadworthy all-metal chassis and true bypass switching, the Liquifier Analog Chorus delivers all the lush sounds you’ve been dreaming of and more.

1-15" Horn-loaded, Flip-top Speaker Cabinet, 450W RMS <br>Drawing from the classic design of Ampeg’s legendary Portaflex cabinets, the PF-115HE combines vintage styling with the performance of a modern 450W cab. The Eminence® 15˝ driver pushes out true Ampeg tone. Since it’s a Portaflex, you can attach any PF Series head to the top, flip it inside and hit the road Ampeg style.<br> <br>Ampeg PF115HE Portaflex bass cab Features at a Glance: <br>Classic Ampeg styling <br>Mount any Portaflex amp to the lid of the cab

Overdrive Effects Pedal for Bass, with Drive, Blend, Treble, and Volume Controls <br> <br>The Ampeg Scrambler Bass Overdrive pedal infuses your sound with authentic Ampeg grit, grind and sag. Dial in a huge range of overdrive from subtle to screaming. Add in a touch of highs, then blend in with your dry signal to create the perfect tone. It’s pure analog Ampeg overdrive that’s super affordable.<br> <br>Features:<br> <br>-Delivers classic Ampeg grit, grind and sag <br>-Separate drive and blend (wet/dry) control <br>-Treble and volume control <br>-True bypass, analog design with incredible signal-to-noise ratio <br>-Roadworthy all-metal chassis construction <br>-9V DC supply or battery capable (not included)

2-10" Speaker Cabinet, 200W RMS, SVT-VR/AV Color Scheme <br>The Ampeg SVT-210AV is a 200W bass speaker cabinet suitable for use with the Ampeg Micro-VR, or any other amplifier of a similar power rating and output impedance. <br>Featuring two custom Eminence speakers, this cabinet is capable of producing sound from 58 Hz to 5 kHz, with a usable low frequency of 40 Hz (-10 dB). Two parallel 1/4" jacks provide connectivity. Finally, the enclosure sports a faithful 1970s-era SVT look.<br> <br>-2x 10" Eminence speakers <br>-1/4" full-range inputs and outputs can be used for daisy-chaining <br>-Frequency response of 58 Hz to 5 kHz <br>-Usable low frequency of 40 Hz (-10 dB) <br>-Useful top-handle <br>-Foot cups on the top panel allow secure stacking of a Micro-VR amplifier

1000-watt Bass Amp Head with 1/4" and Speakon Outputs, Tube Preamp <br>The SVT-7PRO pumps out a ferocious kilowatt of pure Ampeg tone in a compact design that weighs in at just 15lbs. The SVT-7PRO features the same professional features as the other PRO Series heads including a flexible 5-position mid tone control, remote switching FX loop and a sleek onboard variable compressor. The tube preamp boasts a premium JJ 12AX7 that feeds the weight-defying Class-D power section. Sure it’s portable and yes, it’s small…but it can power everything from a small single PN-115HLF up to a monster Heritage SVT-810E. And at 80 cents a watt, the value is undeniable.

Ampeg Nylon Cover for PF-410HLF Speaker Cabinet

500W RMS, MOSFET Preamp, D Class Power Amp <br>Equipped with a three-band EQ and a variable compressor, the PortaFlex PF-500 from Ampeg is a 500W RMS amplifier head designed for bass guitar. Augmenting the EQ's functionality are Ampeg's proprietary Ultra Hi/Lo settings, as well as a five-way midrange selector, giving you different frequency choices for midrange manipulation from 220 Hz all the way up to 3 kHz. Neutrik speakON and 1/4" jacks provide dual outputs to cabinets, while a XLR line out allows you to port sound directly into a console or PA—providing you with a ground lift, a -40 dB pad, and a pre/post EQ option to boot. Should you wish to loop in outboard effects via the rear-panel, the PF-500 sports a FX knob for blending exterior processing to taste. Additionally, a 1/8" headphone out allows you to monitor your signal privately, while a 1/8" stereo auxiliary input affords you the ability to play line-level signals through the amplifier. 500W into 4 ohms or 300W into 8 ohms Dual JFET preamp On-board variable compressor Ampeg's proprietary Ultra Lo and Ultra Hi options 3-band EQ with 5-way midrange frequency control FX mix control Dedicated tuner output for uninterrupted signal flow, if preferred Footswitch jack for controlling mute and FX on/off (dual footswitch not included) SpeakON and 1/4" output jacks XLR Line Out featuring pre/post EQ, -40 dB pad, and ground lift

Weighing in at just 11.8 lbs., the Ampeg PF-800 Portaflex bass head is a dream come true for bass players. You no longer have to dread lugging your gear to the gig. If needed, you can throw this amp in a backpack and hit the subway. Featuring the well-known Ampeg tone, the PF-800 has a large tonal palette with a selectable mid-tone control with five preset mid-tones for all styles of music. With its ultra-high and ultra-low switches, you can get all the snap and deep rumble you desire. If you are looking for tone, wattage, and compact size, then the Ampeg PF-800 Portaflex bass head is for you.<br><br>The Ampeg PF-800 amp head packs a bunch of functionality into a compact amp design. Not only does it pump out 800 watts at 4 ohms, but you also get tone controls, an effects loop, an onboard limiter, and a -15dB input pad. So for a very small amp, you've got all the control you need to craft epic bass tones.<br><br>Thanks to the smart, compact design, the PF-800 head weighs in at 11.8 lbs.! As part of the famed Portaflex series, this amp can be mounted in a Portaflex series cabinet in true flip-top fashion. Yes, you can hide the amp away in the cab just as you could with the vintage B15. The tone is big, but the form factor is extremely compact and convenient.

The SVT-210AV Cover from Ampeg is a protective nylon cover for the SVT-210AV speaker cabinet.

450W RMS, Tube Preamp, Solid State Power Amp <br>The sound is in your head. You've played countless instruments in search of the ultimate soul mate. Now you need an amp that will speak your sound to the audience. That’s where the SVT-3PRO comes in. There’s a reason this amp is a best seller—it delivers the goods! With up to 450 watts and the sweet sound of tubes, the SVT-3PRO is the top choice of rockers and funkmeisters around the globe.<br> <br>It’s all about tone. The SVT-3PRO’s Frequency control allows you to select the center frequency for the Midrange control, giving you a choice of five distinct “voices” for the Midrange. The center frequencies are 220Hz, 450Hz, 800Hz, 1.6kHz and 3kHz. And if that’s not enough, you can use the 9-Band Graphic EQ to custom tailor your sound even more. Or use the EQ to set up a footswitchable “second channel” for your show-stopping bass solo.<br> <br>The SVT-3PRO offers SVT tone and performance (with a few modern enhancements) in a convenient rackmount design. Moderate size, significant power and genuine Ampeg Round Sound… everything a serious bassist needs. Dozens of the world-class artists depend on the SVT-3PRO to get the job done, day in and day out.<br> <br>Feature:<br> <br>-Tube Drive Control <br>-1/4” and Neutrik Speakon® Outputs <br>-Input Peak LED <br>-Input Pad and Bright Switch <br>-Mute Switch and Tuner Out

The Ampeg PF-112HLF bass enclosure delivers the performance, looks and affordability of the popular Portaflex series in a powerful, ported design that hits hard despite its compact size. Handling 200 watts and featuring a single 12″ Eminence® driver, the PF-112HLF doesn’t disappoint.

The legendary tone and portability of the all-tube Ampeg Portaflex amplifiers is faithfully reproduced in the PF-50T. This all-tube Portaflex head provides a harmonically rich and studio-worthy 50 watts of pure Ampeg tone to satisfy the most discerning bass player. Featur ing simple user-adjustable bias adjustment for easy tube replacement and pre-amp and transformer balanced direct outs for maximum versatility. Plus, no speaker load is required for silent recording or even use as a dedicated tube DI. Pair it with the PF-112HLF for the ultimate compact all-tube bass rig.

1-15" Speaker Cabinet, 200W RMS, SVT-CL Color Scheme <br>Featuring a 5 lb magnet and a 15" Cast LF driver, the SVT-15E by Ampeg is a 200W bass speaker with an output impedance of 8 ohms. The speaker is designed to be used in concert with units such as the SVT-CL head and SVT-410HE cab, but it will easily augment any unit of similar power handling and impedance. <br> Four 2" swivel casters render this 72 lb speaker easily wheeled across level surfaces.<br> <br>Features:<br> <br>-1x 15" Cast LF driver <br>-5 lb magnet <br>-Frequency response of 50 Hz to 3 kHz <br>-Usable low frequency of 33 Hz (-10 dB) <br>-Maximum SPL of 123 dB

The Ampeg SVT-212AV bass enclosure delivers pure Ampeg tone in a ported cabinet design that bridges the gap between the fast transient response you want and the rich low end you deserve. The SVT-212AV features 2x12″ custom Eminence® LF drivers and a 1″ compression driver with 3-way level control in a rugged cab with vintage Ampeg styling. Rated to handle 600W RMS at 4ohms, the SVT-212AV is an ideal match for the Ampeg V-4B bass head. Plus, with an optional classic black grille cloth available, it’s the perfect addition to any Ampeg Classic, SVT PRO or Portaflex Series rig.

Looking for a speaker cabinet to brighten up your bottom-heavy bass rig? Or, maybe you’ve recently downsized your transportation to save a few bucks on fuel, and no longer have room to haul your beloved SVT-810E to the gig. The SVT-410HE delivers superb full-range performance, all the way up to 18kHz—and it’ll fit in your new ride. The Ampeg SVT-410HE is also the ideal enclosure for the player who wants to add extended upper register clarity to a system that already features ample low frequency performance. Just ask George Clinton—he uses an SVT-410E to round out the top-end of his killer, all-SVT stage setup.

The SVT-410HE Cover from Ampeg is a protective nylon cover for the PF-410HE speaker cabinet.

The SVT-610HLF Cover from Ampeg is a protective nylon cover for the SVT-610HLF speaker cabinet.

The SVT-810 Cover from Ampeg is a protective nylon cover for the SVT-810AV or SVT-810E speaker cabinet.

The harmonically rich sound and legendary performance of the Ampeg SVT are redefined in the SVT Classic. This dynamically powerful all-tube bass amp delivers a thunderous 300-Watts of unsurpassed quality, reliability and tonal flexibility. Although other companies have tried to capture the classic all-tube sound of ’60s and ’70s Ampeg bass heads, no one can touch the SVT. <br> <br>Classic Series Heads are designed for players who are looking for the authentic, vintage Ampeg tube sound that has earned the respect of the industry. With a huge and diverse group of artists endorsements, including George Clinton (P-Funk), Gene Simmons (KISS), Dave "Phoenix" Farrell (Linkin Park), and far too many others to list here, the SVT-CL is a clear favorite. In the world of high performance bass amps it stands head and shoulders above the rest.<br> <br>-Padded Input <br>-¼" and Neutrik Speakon® Outputs <br>-Complete Tube Protection <br>-User Bias Adjustment

The PF-115 / PF-210HE Cover from Ampeg is a protective nylon cover for the PF-115 or PF-210HE speaker cabinet.

The PF-20T Portaflex 20-watt bass amplifier head puts the iconic tones of all-tube Ampeg amplifiers in a compact package, ideal for rehearsal, small gigs, and recording. You'll find a set of 12AX7 and 6V6 tubes powering the amplifier, which conjures the warm tube sound associated with vintage Ampeg. Weighing in around 15 lbs., the small size and light weight make transporting the PF-20T a piece of cake. And since it doesn't require a speaker load to run, this amp easily gets those tube tones on your recorded tracks without having a cab connected. Get vintage Ampeg tube tone in a lightweight package with the PF-20T.<br><br>Inside of the PF-20T Portaflex bass head, you'll find a set of glowing 6V6 and 12AX7 tubes. The tube design of this amplifier allows you to get that warm, harmonically rich tone Ampeg is known for, or push it hard to get an overdriven tube growl. So whether your ideal Ampeg tone is bringing Motown thump, or grabbing a pick and punching the front end of your amplifier as hard as you can, you'll fall in love with the tones in the Ampeg PF-20T Portaflex.<br><br>Even with the diminutive size of the PF-20T Portaflex amp, you have all you need for getting huge tones through your cabinet, on your tracks, or both at the same time. The straightforward front panel makes dialing in your tones a snap, while the back panel offers XLR outputs for preamp out (with pre/post EQ switch) and transformer-balanced line-out. Its smaller footprint is easy to transport, and it sits beautifully on a recording desk or affixes to current Ampeg Flip-top cabinets. And the whole tube package is less than 16 lbs.

350W RMS, Solid State Preamp, D Class Power Amp <br>Equipped with a three-band EQ and an on-board limiter, the PortaFlex PF-350 from Ampeg is a compact 350W amplifier head designed for bass guitar. Two 1/4" jacks provide dual outputs to cabinets, while an XLR line out allows you to port sound directly into a console or PA. Should you wish to loop in outboard effects via the rear-panel, the PF-350 sports 1/4" jacks for this express purpose. Additionally, an 1/8" headphone out allows you to monitor your signal privately, while an 1/8" stereo auxiliary input affords you the ability to play line-level signals through the amplifier.<br> <br>Features:<br> <br>-Selectable -15 dB input pad <br>-Gain and volume control <br>-3-band EQ with bass, midrange, and treble <br>-Selectable limiter replete with LED <br>-Effects loop <br>-Balanced XLR line output <br>-Voltage selector switch

This is the speaker cabinet for the bass player who demands the ultimate in a single, compact cabinet setup. The SVT-410HLF delivers devastating low-end bass, all the way down to 28Hz, thanks to four 10” speakers working together to move a tremendous amount of air. The SVT-410HLF actually moves 10% more air than two 18-inch speakers, and 25% more than three 15-inch speakers! And those leviathans simply can’t respond to transient peaks as quickly as four tens can.<br><br> The SVT-410HLF also delivers superb top-end, thanks to its 1” horn driver, strategically crossed over at 4kHz. This is a favorite enclosure for such artists as Meshell Ndegeocello, John McVie of Fleetwood Mac, and Ricky Skaggs’ bass player, Mark Fain. <br><br> The Ampeg SVT-410HLF is the supreme speaker enclosure for the multi-string bass player seeking both superior power handling and true high-fidelity performance.

This is the classic Ampeg stack that you see on stages worldwide. Identical to the Classic Series SVT-810E, the AV version has the fit and finish of the original Ampeg SVT stack. It's everything you love about "The Fridge" in a vintage-inspired look that is powerful and timeless.<br><br> The SVT-810AV Infinite Baffle™ design has remained constant since 1969 and delivers the punchy, round sound that defines the Ampeg tone. The combined air-moving capability of eight 10" speakers reacts faster to transients than fifteens or eighteens. The result is sound you can feel, that the audience can feel and that truly delivers what you want out of a bass rig.<br><br> Simply put, the SVT-810AV produces the vast amounts of tightly focused bass your band needs. In the world of high-performance bass cabs, the Ampeg SVT-810AV stands tall and proud.<br><br> -Heavy-duty Poplar ply enclosure <br>-Infinite Baffle design adds punch <br>-1/4" and Neutrik® Speakon jacks <br>-Rugged recessed wheels and skid rails <br>-Ampeg AV fit and finish

The SVT-810E Infinite Baffle™ design has remained constant since 1969 and delivers the punchy, round sound that defines the Ampeg tone. The combined air-moving capability of eight 10″ speakers reacts faster to transients than fifteens or eighteens. The result is sound you can feel, that the audience can feel and that truly delivers what you want out of a bass rig. Simply put, the SVT-810E produces the vast amounts of tightly focused bass your band needs. In the world of high-performance bass cabs, the Ampeg SVT-810E stands tall and proud.

When only the best will do, turn to the SVT-8PRO for ultimate power and massive Ampeg tone. The SVT-8PRO combines our vintage SVP-CL preamp with a 2500-Watt Solid-State power amp for Earth-shaking bass that just won’t quit. Loaded with professional features throughout, the SVT-8PRO was designed for the most demanding player and the most demanding of gigs.<br><br>An outstanding feature, unique to the SVT-8PRO, is its power reduction circuitry, which allows players to dial in classic SVT overdriven tones at any volume level. This means you can get all the crunch and grind of an SVT pushed to the limit, but at a volume level that won’t set off local seismic detectors.<br><br>Our 5-position Ultra Low selector gives you low frequency tone-sculpting capability like never before. From the fattest low-end to tight, highly articulated punch, the choice is yours. And the built-in DI can patch you right into the front of house, although you probably won’t need it! Bottom line: SVT tone at concert volume levels, in a lightweight 23-pound package.

150W 1 x 15" Bass Combo Amplifier with 3-band Eq, Aux Input, 15dB Pad, Headphone Output, Ultra Hi/Lo Tone Shaping, Effects Loop, Direct out, High-frequency Mute, and Bass Scrambler - Black<br> Ampeg’s BA-115 15″ Bass Combo delivers classic Ampeg tone in a 150W design with performance-driven features perfect for the stage. The ruggedly portable design provides a true 60-degree sound reinforcement monitor angle that adds clarity in any situation. The BA-115 features Bass Scrambler™ overdrive plus flexible tone-shaping and professional performance features in a portable, powerful 15″ combo<br> <br>Ampeg BA-115 Bass Combo Amplifier Features: <br>-150-watt output <br>-15" Ampeg Custom 15 speaker <br>-3-band EQ with ultra-high/low tone shaping and HF mute <br>-1/8" stereo and 1/4" mono auxilliary input with level control <br>-1/8" headphone output <br>-XLR direct line out <br>-Effects send/return <br>-Bass Scrambler overdrive circuit <br>-15dB pad on the input for use with active or high-output sources <br>-Covered in classic black Tolex with metal-reinforced corners <br>-Newly designed wedge cabinet for use in floor monitor position

200W Solid State, SVT-VR/AV Color Scheme <br>Don't be fooled by its diminutive, dare we say "cute", appearance. The Ampeg Micro-VR is a compact powerhouse fully capable of pumping its 200 watts of genuine Round Sound ™ into myriad live and recording situations. This portable, powerful solid-state head in traditional Ampeg drag is a pleasant surprise from the second you lay eyes on it to the moment its indisputable Ampeg tone hits your ears. The Ampeg SVT210AV is the portable alternative to a full sized SVT cab. Ideal for bleed-sensitive recording situations where the SVT810-AV can be too loud and live situations where it can be too large, the SVT210AV is designed using Ampeg's legendary Infinite Baffle ™ system for maximum speaker efficiency and true Ampeg tone. <br>Ampeg SVT Micro Head Features: <br>Preamp: Solid State <br>Power Amp: MOSFET <br>RMS Power Output: 200 Watts @ 4 ohms <br>Tone Controls: 3-Band <br>Mid Tone Control: Ultra Mid <br>Balanced Line Out: with Pre/Post and Pad

450W 2x10" Bass Cab with 1" Tweeter, Flip-top Design<br> <br>Featuring a flip-top design, the Portaflex PF210HE from Ampeg is a 450W bass speaker cabinet that blends seamlessly with the PF-350 or PF-500 amp head, but will serve any amplifier of similar power handling and output impedance. A set of 2x10" Eminence speakers combined with an adjustable high-frequency horn provides a frequency range of 53 Hz to 17 kHz, giving you ample sonic space to thump or growl—the choice is yours.<br><br> Removable casters render this unit marginally portable. Dual parallel 1/4" jacks provide options in connecting or daisy-chaining to other cabinets. Flip-top functionality for secure transport of corresponding Ampeg Portaflex amp heads (available separately)<br><br> Features:<br> <br>-Aligned screw-holes and clasps allow secure stacking of a Portaflex amplifier <br>-2x10" custom ceramic Eminence speakers <br>-1x1" high-frequency horn with three-way attenuator (off, -6 dB, 0 dB) <br>-Two 1/4" jacks wired in parallel for input and output <br>-Removable casters <br>-Sensitivity of 99.6 dB SPL @ 1W/1m <br>-Usable low frequency of 38 Hz (-10 dB) <br>-Maximum SPL of 125.6 dB

In the world of high-performance bass amps, Ampeg’s SVT amplifiers are in a class by themselves. In true Ampeg tradition, the SVT-4 PRO offers you more power, performance and flexibility than any other bass amplifier in its class.<br><br> SVT-4PRO offers an expansive palette of tonal options. The Frequency control allows you to select the center frequency for the Midrange control, giving you five distinct voicing options for the Midrange. And if that’s not enough, you can use the 9-Band Graphic EQ to fine-tune your sound—or use it to set up a footswitchable “second channel” with a volume boost for your bass solo.<br><br> SVT-4PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient, high-powered, rackmount design. With a huge diverse group of artist endorsements, including Tony Levin (Peter Gabriel/King Crimson), Cliff Williams (AC/DC), Pablo Stennett (Ziggy Marley) and far too many others to list here, the SVT-4PRO is a clear favorite among professionals. In the world of high performance bass amps, the Ampeg SVT-4PRO has what it takes to really define your sound.<br><br> Features<br><br> <br>-1/4" and Neutrik Speakon® Outputs <br>-Input Peak LED <br>-Defeatable Optocoupler Limiters <br>-Variable Internal 24 dB/Octave Crossover <br>-Variable 0 - 7:1 Compressor