With ample storage and excellent padding, this Blackstar Super Fly GB-1 Gig Bag is designed to carry and safely transport the Super Fly amplifier. Made from a tough, water-resistant material, this bag features numerous interior and exterior pockets and a mesh inside front compartment for all kinds of extras such as cables and a power supply.

The MESA® EL-84 / 6BQ5 is the little brother to the EL-34 and is the classic European-designed tube that lead the original British invasion. Our EL-84 offers tight and punchy bass, smooth and warm midrange, and an amazing chiming upper-mid and sparkling top end that is always inspiring to play!. Brilliant focus with a frequency response that always brings your guitar to the front of the mix, this EL-84 is true to its classic roots. MESA power tubes are among the highest quality available and selected for their exceptional full-range tonal quality, consistency and reliability.

The MESA® 6V6 STR 417 is the little brother to the 6L6 and exemplifies classic American tube tone from yesteryear. Extremely sweet and bubbly with a beautifully deep bass and spacious, shimmering highs, this tube defines vintage "Deluxe" styled tones and is a great substitute in Mark & Lone Star Series amplifiers when used with their Tweed Power Switch feature (consult the amplifier owner's manual for proper use). MESA power tubes are among the highest quality available and selected for their exceptional full-range tonal quality, consistency and reliability. All MESA tubes offer unsurpassed consistency and reliability for ANY tube amplifier, and certainly MESA amplifiers!

Protect your precious bass speaker cabinets with the Ampeg SVT-15E Cabinet Cover. This rugged and padded cover keeps you speaker cab free from dust and dirt while it is being stored or between gigs. No one likes moving gear in the rain, while the cover won't make it any more fun, it will keep your gear dry. You spent your hard earned money on your Ampeg speaker cab, why not protect it with a cover that's made to fit it? order your Ampeg SVT-15E Cabinet Cover today! <br>Ampeg SVT-15E Cabinet Cover Features at a Glance: <br>-Rugged nylon cover for Ampeg SVT-15E speaker cabinets <br>-Heavily-padded to keep your gear safe from bumps and dings <br>-Handle cut outs for easy transport <br>-Accessory pouch for holding cables, tuners, and more Embroidered logo

Currently shipping in MESA/Boogie® 6L6-based production amplifiers. The MESA® 6L6 STR 440 is our very best overall, premium grade, USA equivalent 6L6, and our tube of choice in the production of all new MESA 6L6 powered models. Remarkable bass definition, articulate mids and shimmering highs keep every note amazingly intelligible, with a smooth, creamy character. Leading structural quality provides exceptional consistency and reliability and is an outstanding choice for ANY 6L6 based amps and all styles of music. The STR 440 is a direct replacement for our out-of-production STR 420s and STR 430s. MESA power tubes are among the highest quality available and selected for their exceptional full-range tonal quality, consistency and reliability. All MESA tubes offer unsurpassed consistency and reliability for ANY tube amplifier.

The EL 34-STR-447 is the best valve EL-34 Mesa ever. It is an equivalent premium valve NOS (New Old Stock) and is the preferred Mesa in the production of all models equipped with EL34. It has a very urgent and aggressive sound and is an excellent choice for all styles "gain" especially classic rock, alternative and metal.

The Ampeg SCR-DI Bag is the ideal accessory for all bassists who want to transport their Ampeg SCR-DI Preamp well protected to their next concert session or recording studio. The thick padding protects the preamplifier from shock, while the power supply or other accessories are in the compartment provided for this purpose. In addition, the Ampeg Bag for SCR-DI offers an adjustable shoulder strap in length.

The SVT-810 Cover from Ampeg is a protective nylon cover for the SVT-810AV or SVT-810E speaker cabinet.

The MESA® 5AR4 Rectifier Tube produces a vintage feel with light to mild "sag". While it produces more "sag" than Silicon Diodes, it is the least "saggy" of our tube rectifier offerings. Used in vintage MESA amps like the Heartbreaker, Blue Angel and Maverick as well as many other vintage, non-MESA amplifiers. MESA Rectifier Tubes are premium grade and offer unsurpassed consistency and reliability for ANY tube amplifier, and certainly MESA amplifiers!

The MESA® 5U4G Rectifier Tube is a classic 1930s "Coke Bottle" design. It produces a flexible, elastic and spongy feel that is a bit more controlled and slightly less "saggy" than our newer 5U4GB

The MESA® 5U4GB Rectifier Tube is our very best overall 5U4 and our rectifier tube of choice in the production of all new MESA amps featuring this tube. This tube produces a "traditional vintage sag" with the most elastic and compressed feel of the two 5U4's that we offer. Amazing feel and exceptional overall quality make this our factory favorite. Based on classic 1950s technology, the 5U4GB is a vastly improved 5U4 design that is extremely reliable and consistent, as well as more compact compared to original “Coke Bottle” 5U4Gs (3 3/4" from bottom of base to top of glass). It is similar in size to a 6L6 power tube so please take special care to install them in the correct tube position(s), especially when replacing 6L6's at the same time. 5U4GB Rectifier Tubes are used in MESA Amps like the Dual and Triple Rectifiers®, Road King®, Roadster®, Stiletto Ace™, Deuce™ & Trident™.

The PF-115 / PF-210HE Cover from Ampeg is a protective nylon cover for the PF-115 or PF-210HE speaker cabinet.

The SVT-210AV Cover from Ampeg is a protective nylon cover for the SVT-210AV speaker cabinet.

Blackstar PSU 9V 500mA Power Supply is compatible with LT Pedals

MESA 12AX7's are premium grade preamp tubes that provide the maximum level of high gain output and overall tonal quality with unsurpassed consistency and reliability - They possess a smooth and balanced response across the tonal spectrum and are extremely lively, open and expressive.

Fly PSU is a UK power supply unit compatible for the FLY 3

The MICRO-VR Cover from Ampeg is a protective nylon cover for the Micro VR head.

The PF-350 Bag from Ampeg is a protective nylon bag for the PF-350 bass amp head.

The PF-500 / PF-800 Bag from Ampeg is a protective nylon bag for the PF-500 or PF-800 bass amp head.

The SVT-410HE Cover from Ampeg is a protective nylon cover for the PF-410HE speaker cabinet.

The SVT-610HLF Cover from Ampeg is a protective nylon cover for the SVT-610HLF speaker cabinet.

Protect your precious bass amp head with the Ampeg SVT-CL/VR cover. This rugged and padded cover keeps you head free from dust and dirt while it is being stored or between gigs. No one likes moving gear in the rain, and while the cover won't make it any more fun, it will keep your gear dry. You spent your hard earned money on your Ampeg bass amp head, so why not protect it with a cover that's made to fit it?

The MESA® 5881 STR 425 is a military grade 6L6 designed with an emphasis on rugged durability and the capability to handle higher voltage requirements. It produces a full bass and rich midrange with tapered highs that lends itself well to styles of jazz, fusion and traditional roots and blues music… or any style where tapered high frequencies and greater longevity and reliability is desired. The STR 425 is also commonly used in older MESA all-Tube Bass Amps using 6L6s like the MESA D-180, Bass 400 and Bass 400+ models. MESA power tubes are among the highest quality available and selected for their exceptional full-range tonal quality, consistency and reliability. All MESA tubes offer unsurpassed consistency and reliability for ANY tube amplifier, and certainly MESA amplifiers!

Attach your Sonnet 60 or Sonnet 120 to a standard 35mm P.A. stand using the SA-2 stand adaptor

The AMG 250 is a lightweight and compact convertible cart with an impressive 250-lb capacity. It features large never-flat 8″ wheels and 4″ heavy-duty casters, an easy-to-use patented handle design, sturdy carbon steel construction, and built-in stair climbers.<br><br>Features:<br>-Lightweight & compact<br>-Large never-flat 8'' wheels<br>-Made from sturdy carbon steel<br>-Easy-to-use patented handle design<br>-3 different transformations for different types of cargo<br>-4-wheel railed platform cart<br>-4-wheel open platform cart<br>-2-wheel handtruck - Built in stairclimbers<br>-Folds compact for storage - Fits in most trucks or front seats

The PF-115 / PF-210HE Cover from Ampeg is a protective nylon cover for the PF-115 or PF-210HE speaker cabinet.

Ampeg Nylon Cover for PF-410HLF Speaker Cabinet

The SVT-410HLF Cover from Ampeg is a protective nylon cover for the SVT-410HLF speaker cabinet.

Replacement Preamp Tube for 12AX7<br> The Mesa/Boogie SPAX7-A preamp tube makes the ultimate replacement tube for any 12AX7A in your amp. This premium product is considered a "special requirement preamp tube" because of its build quality and performance. The SPAX7-A shows very low sensitivity to microphonic noise — an essential attribute for a preamp tube (especially in high-gain, high-volume amps) in live or studio environments. No matter which tube in your amp's gain stage needs to be replaced, make sure to choose the right tube for the job — Mesa/Boogie's SPAX7<br> <br>Mesa/Boogie SPAX7-A Premium Replacement Preamp Tube Features:<br> <br>Premium-grade substitute tube <br>Works in all preamp gain-stage positions <br>Ultra-high performance 12AX7 tube <br>Very low sensitivity to microphonic noise <br>Very consistent and reliable

The MESA® EL-34 STR 447 is our very best overall, premium grade NOS equivalent EL-34 and our tube of choice in the production of all new MESA EL-34 powered models. It offers traditional EL-34 tone & feel – urgent and aggressive – and is an excellent choice for all styles of gain, especially classic rock, alternative rock & metal. This tube is true to it’s British origins with tight, focused low end, crushing midrange crunch and crystal-like highs. It’s one of our favorites for authentic Brit tones. MESA power tubes are among the highest quality available and selected for their exceptional full-range tonal quality, consistency and reliability. All MESA tubes offer unsurpassed consistency and reliability for ANY tube amplifier, and certainly MESA amplifiers!

The MESA® 12AT7 is a premium grade, lower gain preamp tube most often used in reverb stages and/or phase inverter positions in older amplifiers. It is used in older MESA/Boogie® designs (MESA amps built before 1991) as a reverb driver stage, but the 12AT7 can also be substituted in 12AX7 gain stages where users are seeking lower gain response from higher gain positions in the preamp string. The lower gain output of 12AT7s can expands the range of clip and overdrive potential of higher gain amps for truly authentic roots and traditional styles.

You'll find the MESA 5Y3 inside all the Mesa/Boogie Lone Star Special tube amplifier. The MESA 5Y3 is a true, authentic 5Y3 NOS (New Old Stock) tube based on the original Phillips 5Y3 and is built to Mesa/Boogie's exacting specifications. This tube produces a sultry vintage sag, creating a silky, smooth feel on the strings and provides the most sag of all of Mesa/Boogie rectifier tubes. Get vintage tone with the MESA 5Y3.

Amp it up with the ingenious SKB Amp Utility Vehicle that fits all 2-12 style mid-size combo amps. Amps are held in place on a rugged rolling hook and loop fastener board with four of our patented adjustable corner cleats and a secure reverse-cinch belt. When the amp is in use, it can sit securely on top of the cover at a height that allows better sound projection. Features: Roto molded for durablity 2x12 combo amp transport and stand Locking wheels for easy transport Corner cleats for stability when transporting Comfortable over-molded handles

The SKB 1x12 Amp Utility Vehicle (1SKB-R112AUV) offers the same protection and convenience as our larger 2x12 Amp Utility Vehicle (1SKB-710). Amps are held in place on a rugged rolling hook and loop fastener board with four of our patented adjustable corner cleats and a secure reverse-cinch belt. When the amp is in use, it can sit securely on top of the cover at a height that allows better sound projection.

Cable - 8 Pin Din, Male/Male - 25 ft.<br><br> Used with the following amplifiers:<br><br> Bass Prodigy Bass Strategy Express Plus Mark V Road King Road King II Road King II - w/Tuner Mute Roadster Titan V12

Power Supply for SCR-DI Footpedal

The 1SKB-PS-8 Powered Pedalboard is injection-molded from eco-friendly rubber modified styrene which provides for a very durable and rigid, yet lightweight platform for guitarist's effect pedals. The 1SKB-PS-8 features eight (8) built-in 9VDC output jacks and an external transformer rated at 500mA of total current. The large 19" x 12" hook and loop surface allows for secure pedal positioning for up to eight (8) standard size pedals. All cables are included for powering the most popular pedals. A heavy-duty ballistic nylon carry bag with exterior zipper pocket and adjustable shoulder strap are also included with the 1SKB-PS-8 Powered Pedalboard Box Contains 1 x SKB Pedalboard including cables and power adapter

The SKB-SC2111 Controller Soft Case is designed to fit all-in-one effects floor boards (BOSS GT-10, Digitech RP1000, Line6 X3 Live, Vox Tonelab LE and many more) as well as MIDI foot controllers (Roland FC300, etc.) A rigid EPS foam interior is surrounded by a heavy-duty canvas exterior with an exterior zippered pocket. A removable one inch (1”) pad of convoluted foam in the lid is provided to allow for various product heights. A shoulder strap and padded carrying handle is also included to make transport simple.

The 1SKB-SC2316 combines the protective qualities of rigid foam with the style and portability of a canvas bag. A padded interior, padded carrying handle and shoulder strap provide lightweight portability. The 1SKB-SC2316 Pedalboard Soft Case is designed to fit our PS-8 and PS-15 Pedalboards, but can also be used for any item with these dimensions (the case is not limited to pedalboards). A rigid EPS foam interior is surrounded by a heavy-duty canvas exterior with an exterior zippered pocket. A removable one inch (1”) pad of convoluted foam in the lid is provided to allow for various product heights. A shoulder strap is also included to make transport simple.

Cable - 5 Pin Din, Male/Male - 25 ft.<br><br>Used with the following amplifiers:<br><br>- Express, <br>- F-Series Amps<br>- Mark Five: 35, <br>- M-Pulse 360 / 600 Ver. 1,<br>- Rect-O-Verb 50 - Series II, <br>- Single Rectifier / Solo 50 - Series II,<br>- Venture 600 Footcontroller

Power supply for Super Fly Models

This AC adapter provides 9V DC current for most pedals requiring 9 volts of power. Check specifications to make sure this adapter is the right fit for your pedal.

Most common power pentode found in British amplifiers such as Marshall, Hiwatt, Laney, and Sound City. The EL34EH defines the classic British rock sound of the 1960's and 1970's.

Regulated adapters to ensure noise free power and minimize the circuitry in our pedals. This gives our pedals more efficient noise free power and also prolongs battery life.<br><br>Compatible with most popular pedal brands.<br><br>9VDC 300 mA Regulated Power Supply

Aluminum Construction<br> Velcro Stripping Tape and Two Hooks Included<br> 4 Rungs for 10 XVIVE Micro Pedals with same room to spare.<br> Hole for LED Clip lamp.<br> Size :390mm *320mm<br>

360 degree protection for your pedals<br> Durable vinyl liners with super soft top panels to protect your effect knobs and switches<br> Reinforced hybrid shell reduces pounds of weight to protect your sound<br> With Comfortable adjustable padded shoulder strap<br><br> Exterior Cover: 600D (waterproof & mould proof)<br> Padding: 20mm PE<br> Dimensions: 450MM x 385MM x 140MM

This power supply is light and pedalboard-friendly with ten fully isolated outputs ranging from 9V to 18V—including two variable 6V–15V outputs—and special noise-reduction circuitry for quiet operation.

Whether you need a space-saving solution for your downsized travel board or you just need to power a small, carefully curated selection of tried-and-true staples, this little box has what you need—all while taking up less space than a candy bar.

Sturdy 3PDT switch. This is the original, patented blue 3PDT switch that has been used in boutique stompboxes for many years and has earned a great reputation for reliability and smooth switching action.

Love your effects pedals? Then show them some love! The PB600 protects up to 6 of your favorite stomps, and keeps them ready to rock at a moment’s notice. This rugged suitcase-style pedal board comes with everything you need, including an integrated power supply and enough audio and power cables to interconnect up to 6 devices. The removable cover can even be locked (locks not included) for a double layer of protection.

Power your DigiTech iStomp, JamMan Solo XT, or Whammy 5 with the DigiTech PS0913DC-01. The DigiTech PS0913DC-01 is a 9 volt DC power supply.

The light-weight HeadRush gig bag will keep your HeadRush Pedalboard and other accessories safe and secure while traveling to wherever your next gig takes you.