| Cart is empty |
Item available at Melody House Branch:
| Low Comp | Controls compression amount for the low band. Both threshold and makeup gain are controlled to maintain a constant level. This control is also used to control the compression amount when the compressor is enabled for clean signal in Darkglass Su |
| Low Level | Sets the output volume of the low-pass signal. |
| Low Pass Frequency | Controls the cut-off frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids. |
| High Level | Sets the output volume of the distorted high-pass signal. |
| High Drive | Sets the amount of distortion for the high pass side. |
| High Pass Frequency | Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition. |
| Master | +-12 dB. Sets the overall volume of the unit. |
| Low shelf | +-12 dB @ 80 Hz. |
| 250 Hz / 500 Hz / 1,5 kHz / 3 kHz | +-12dB. |
| High shelf | +-12 dB @ 5 kHz. |
| Direct Output | Balanced XLR output for connecting the pedal to a microphone preamp, PA system, etc. |
| Ground lift | Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output. |
| Cab Sim | Toggle the cabinet simulation on/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed. |
Copyright © 2021. All Rights Reserved. 
Microtubes X Ultra Bass Preamp Pedal With Variable Lowpass/Highpass Filters, 6-band Graphic EQ from Darkglass is 100% original and brand new. We, at Melody House take pride in our after sales service and support. For further details on the Microtubes X Ultra Bass Preamp Pedal With Variable Lowpass/Highpass Filters, 6-band Graphic EQ, Darkglass, simply write to us to consult an expert or order online and we will take care of the rest. Happy Shopping!